Pixel PXUTVKT User manual

Before geng started locate the best place to install the receiver, where to connect to power and the best
to install the antenna. The diagrams used in this instrucon sheet reference a 2019 Polaris® Turbo S.
It is important to note that your installaon may be different from what is pictured in the instrucons.
It is recommended to disconnect all vehicle power before starng the installaon.
Included in the kit are the following parts:
(1) SiriusXM Radio UTV Antenna
(1) Hardwired Power Adapter
(1) SXVD1 SiriusXM Receiver Dock
(1) AM / FM Antenna Adapter (for Ride Command® and other UTV sound systems)
(1) FMDA25 Direct Wire Audio Adapter
(1) Protecve Zipper Case for the SiriusXM receiver
1) Selecng the Correct Antenna Adapter
Included in the kit are two FAKRA antenna adapters that are used to connect the FMDA25 to the Ride
Command® antenna system. For vehicles prior to 2020 use the blue colored adapter.
For vehicles manufactured in 2020 and newer use the cable with the black FAKRA connector.
PXUTVKT - Satellite Radio UTV Kit
Installaon Instrucons
Blue for vehicles prior to 2020
Black for 2020 vehicles and newer
Universal antenna adapter cable
Please Note: An addional installaon opon is via AUX cable. Locate the AUX port located on the dock.
Use an auxiliary cable to connect the dock to your sound system.
Pixel Technologies, Inc. | www.pixelsatradio.com | contactu[email protected]m | [phone]

2) Connecng Adapters to FMDA25
If your vehicle has an AM/FM antenna to you can sll use the antenna with the FMDA25. The FMDA25 allows
the AM/FM signal to pass-thru to the Ride Command® system (or other aermarket stereo system).
1. Connect the RCA-FKA adapter cable into the female socket on the TO VEHICLE FM ANTENNA port on the
FMDA25
2. Connect the PRC-FKA (or V2 RIDECO per step 1) to the TO VEHICLEL FM RADIO port on the FMDA25
1
2
3
RCA-FKA
Installaon without AM/FM Antenna
If there is no AM/FM antenna installed in the vehicle the
RCA-FKA antenna adapter is not needed and the port labeled
TO VEHICLE FM ANTENNA should be le open.
PRC-FKA or V2 RIDEOCO
Pixel Technologies, Inc. | www.pixelsatradio.com | contactu[email protected]m | [phone]

3) Locate the RIDE COMMAND® AM/FM Antenna Port
1. Locate the AM / FM antenna connector in your UTV. The color and locaon may vary based on the year and
model of your vehicle. In our example it is the connect on the right of the connecon cluster shown below.
1
2
3
4) Connect the FMDA25 to the Vehicle AM/FM Antenna Port
Plug the connecon from the FMDA25 labeled
"TO VEHICLE FM RADIO" into the RideCommand®
Antenna port. Make sure the connector is pushed all
the way down and the FAKRA connectors snaps in.
If the vehicle has an AM/FM antenna connect the
aqua colored connector on the port labeled
“TO VEHICLEL FM RADIO”. Make sure the connector is
pushed all the way down and the FAKRA connectors snaps in.
Pixel Technologies, Inc. | www.pixelsatradio.com | contactu[email protected]m | [phone]

Step 5) Connect the Audio Cables to the SiriusXM Dock
Step 6) Connecng Power
Included in the package is a hardwired power adapter.
Please refer to the aached instrucon sheet for the 5V-HPK
hardwired power adapter.
Connect the power adapter to the power port on the docking
cradle (PWR). If using the hardwired power adapter please
reference the installaon instrucons provided in the packaging.
On the FMDA25 locate the audio cable labeled "TO SIRIUS RADIO" and connect the cable into the FM Port
on the docking cradle. Shown by the arrows in the pictures below.
FM Out Port
Power Port
Pixel Technologies, Inc. | www.pixelsatradio.com | contactu[email protected]m | [phone]

7) SiriusXM Radio Antenna Installaon
Once you have the audio and power connected it's me to install the SiriusXM Radio antenna.
It is recommended to select a locaon on your UTV that will allow the antenna to have maximum clearance from
a roof or other objects. Please refer to the installaon instrucons packaged with the antenna included in the kit.
8) Connecon the Antenna to the Cradle
1. Run the antenna cable from the antenna either inside the roll cage pipe
tubing or along the outside securing the antenna cable with cable es (not
supplied). Be sure not to over ghten the cable es as the stress could
cause damage to the antenna wire.
2. Bring the antenna connecon to the desired locaon (dry box is
recommended) to the SiriusXM receiver. It is recommended to leave some
slack in the cable.
3. Connect the antenna wire to the antenna port (ANT) on the docking cradle.
If addional cable is required to complete the installaon antenna extension
model SBRGT-5 is recommended.
9) Power Up and Tune Radio
Aer connecng the antenna, power, and audio to the
receiver docking cradle you will need to tune the
Radio to an empty FM radio channel.
To find an empty FM channel in your area visit:
hps://www.siriusxm.com/frequency
IfÊthereÊisÊstacÊweÊrecommendÊtoÊselectÊaÊdifferentÊFMÊchannel.
Pixel Technologies, Inc. | www.pixelsatradio.com | contactu[email protected]m | [phone]