PIZZELL Cart Pro User manual

Three-Shelf Dining Cart Table
Assembly Instructions

Purchase date: .........................................
-1-
TABLE OF CONTENTS
1............................................ytnarraW
Table of contents...............................1
Assembly Instructions.....................3-7
Contents Index Warranty
Product Model: .........................................
Order ID: ..................................................
Purchase date: .........................................
These information will be required to offer under
the 12 months warranty.
Parts List ............................................2
For any queries or assistance mail
Promise to responsed within 24 hours
S
E.
A. B.
C.
D.
F.
H.
G.
J.
I.
K.
L.
Customer Service
[email protected]

Screw M10*85
Hook
-2-
A.
1PC 1PC 1PC
1PC
2PCS
B. C. D.
E.
1PC
F. G. H.
1PC
1PC 1PC
J.I.
M.
K. L.
1PC
P
V
Q
R6PCS
8PCS
U2PCS
2PCS
2PCS
4PCS
S
T
Nut M10
Nut M10
Parts List
Screw M6*40
1PC 1PC 1PC
8PCS
Screw M6*16
Screw M6*12

Assembly Instructions
-3-
Assemble the side handle I to the top plate with 2pcs washers
and 2pcs screw Q. (Note: There has a crossbar under the
stainless steel tabletop, and the crossbar has a gap which is
not defective, it's product design. There is no crossbar under
the black one.)
Step 2
CQ
I
CTop Plate
1PC
1PC
I Side Handle
Q Screw M6*16 2PCS
If you buy the cart with stainless steel tabletop, you need to
remove the protective film of the stainless steel tabletop.
If you buy the black one, skip it.
Step 1
When installing, we suggest you can assemble it on the carton which
come with the product, or any other clean floor to avoid the desktop
being scratched.
ATTENTION

-4-
Assemble the leg A to the top plate with 4pcs screw P.Step 3
A
CP
A Leg 1PC
4PCS
P Screw M6*12
Assemble the leg B to the top plate with 4pcs screw P.Step 4
B
P
P
B Leg 1PC
4PCS
P Screw M6*12

-5-
Assemble the middle plate D to the legs with 4pcs screw Q.Step 6
Q
D
D Middle plate 1PC
Q Screw M6*16 4PCS
Attach 2 wheels F to the leg B using screw V, and lock with
nut U and T.
Step 5
V
U
T
F
F Wheels 2PC
2PCS
2PCS
2PCS
T Nut M10
U Nut M10
V Screw M10*85

-6-
Assemble the bottom plate E to the legs with 4pcs screw R.Step 7
R
R
E
E Bottom plate 1PC
R Screw M6*40 4PCS
Assemble the gas bottle hook for gas bottle G on side beam with
2pcs screw R. Assemble the gas bottle support H on bottom plate
with 2 pcs screw Q.
Step 8
G
H
R
Q
G Gas bottle hook 1PC
R Screw M6*40 2PCS
H Gas bottle support 1PC
Q Screw M6*16 2PCS

-7-
Assemble the trash bag support.Step 9
Inserting the trash
bag support into the
small pins on the
sides and tighten
the screws on them.
L Trash bag support 1PC
Assemble the rest accessories to meet your needs.Step 10
J Spice Station 1PC
K Bracket 1PC
S Hook 4PC