15" PT1500MX, PT1505MU, PT1550MX, PT1555MU
17" PT1700MX, PT1705MU
19" PT1910MX, PT1915MU
QUICK START GUIDE
PT Touch Screen LCD
Monitors
Thank you for choosing Planar’s new
PT touch screen LCD monitors.
Customer Service:
To view online documentation and
frequently asked questions, or to send an
email to our technical support sta, please
visit: http://www.planar.com/support
Or for 24x7 telephone support call
1-866-PLANAR1 (1-866-752-6271)
in the United States.
Or +1 503-748-5799 outside the United
States. Toll charges may apply.
To receive advanced notication of product
updates, please register your monitor at
www.planar.com/support.
Monitor Set-up
If it is necessary, clean the front surface of
the display by using clean, compressed air
or by using only a clean, dry, soft cloth.
Connect the video and power cables.
Read the Touch Set-up section prior to
powering up the computer.
Touch Screen Set-up -
Please note: The PT1500MX, PT1550MX,
PT1700MX and PT1910MX are available with
dual serial RS-232/USB touch screen controllers.
The PT1505MU, PT1555MU, PT1705MU and the
PT1905MU are available with only USB touch
screen controller. If you’re using the RS-232
serial controller follow the instructions below:
Be sure that the RS-232 cable is connected
to the computer.
Power on the computer.
Load the Touch Screen Driver CD.
Follow the step-by-step instructions as
found in the Touch Screen Driver Installation
Manual located on the CD.
1.
2.
3.
1.
2.
3.
4.
If you’re using the USB connection follow
the instructions below:
Be sure that the USB cable is connected
to the PC.
Load the CD-Rom.
Follow the step-by-step instructions as
found in the Touch Screen Driver
Installation Manual located on the CD.
If the touch screen isn’t active, simply
reboot your system.
PLEASE NOTE! Don’t plug in both the
RS-232 and USB cables! Doing so may
cause a driver conict, making your touch
screen inoperable.
1.
2.
3.
4.
Set-up Diagram Package Overview
Contents - Important Recycle Instruction -
LCD Lamp(s) inside this
product contain mercury.
This product may contain other
electronic waste that can be
hazardous if not disposed of properly.
Recycle or dispose in accordance with
local, state, or federal Laws. For more
information, contact the Electronic
Industries Alliance at WWW.EIAE.ORG.
For lamp specic disposal information
check WWW.LAMPRECYCLE.ORG.
LCD Display
(Internal Power Supply)
Power Cord VGA Signal Cable
Audio-in Cable USB Cable - Type A to B
User’s Guide Landing Strip Touch Screen Driver
Installation CD-ROM
The test results show that this device meets the FCC rules. Refer tothe product operation manual for FCC classication found at: http://www.planar.com/
support. Those limits are set to protect residential areas from the devices with harmful emission.This device will produce, use and radiate radio frequency
energy. In addition, failure to follow the user’smanual to install or use this device might produce harmful interference with radio communication. Not
withstanding the foregoing, it does not guarantee that this type of harmful interference does not occur in some special installations.The interference
caused by this device to the reception of radio or television signals may be veried by turning it on and o.Any changes or modications to this TFT LCD
would void the user’s authority to operate this device.
020-0700-00A
RS-232 Cable
(PT1500MX, PT1550MX, PT1700MX,
PT1910MX Products Only)
Warning! Don’t plug in both the RS-232 and USB cables! This will
cause your touch screen not to work due to driver conict.
PT1505MU and PT1705MU
PT1910MX
PT1500MX, PT1550MX and PT1700MX
PT1915MU
Planar has nearly 25 years experience delivering
specialty display solutions for the most demanding
applications. Each PT touch screen LCD monitor
comes standard with our 3-Year Customer First™
Warranty featuring FREE 2-Day Advance Replacement
including prepaid shipping both ways.
DVI-D Cable
(PT19 Products Only)
USB Cable - Type A to A
(PT1550MX, PT1555MU Only)
