Planet Audio TQ12S Installation instructions

Technical Support
If you need technical support with your PlanetAudio productor have
questions about its use, please contact us:
805.751.4853
www.PlanetAudioUSA.com
5
Due to ongoing product development, specifications are subject to change without notice.
1
Congratulations on your purchase of the Planet Audio “TQ” Series
Subwoofer. Planet Audio takes great pride in producing products
that sound and look great, but stand up to the daily rigors applied
by audio enthusiasts around the world.

TQ12S 12” (30cm) Subwoofer
x Single 4 ΩVoice Coil
x 1500 W Peak Power Handling
x Treated Paper Cone
x Large Foam Surround
2 4
Enclosures
The TQ12S is designed to work in a medium sized sealed or ported
enclosure . Since the wooferhas pole-vent, it needs a minimum
clearance from the rear wall of the enclosure of 0.75” (19 mm).
Below you will findthe dimensions to make the enclosure to suit the
subwoofers needs, it has been designed for maximum output while
retaining great sound quality.
The dimensions havealready accounted for the volume displacement
of the subwoofer, and using 3/4” (19mm) MDF. All dimensions are
external.
Sealed Dimensions:
Length (L) : 15” (381 mm)
Width (W) : 12” (304.8 mm)
Height (H) : 13” (330.2 mm)
Cutout Diameter: 11” (279 mm)
Ported Dimensions:
Length (L) : 20” (508 mm)
Width (W) : 12” (304.8 mm)
Height (H) : 14” (355.6 mm)
Port Diameter : 4” (101.6mm)
Port Length : 12” (304.8 mm)
Port Freq : 34 Hz
Cutout Diameter: 11” (279 mm)
Enclosure Dimensions

4 Ω
4
Wiring your Subwoofer
Multiple Subwoofers
Series
8 Ω
Parallel
2 Ω
3
Product Specifications
Impedance 4 Ω
ResonantFrequency 35Hz
Qts 0.61
Qms 9.52
Qes 0.66
Vas 3.083cuft.(87.3liters)
Xmax 10 mm
Sensitivity (1 W/ 1 m) 87 dB
Peak Power Handling 1600 W
MountingDepth 5-3/16” (157.2 mm)
Cutout Diameter 11” (279 mm)