Planet Networking & Communication DVR-872 User manual

DVR-872
DVR-1672
DVR-872
DVR-1672
Quick GuideQuick Guide
2011-AB5300-001
their respective owners. Copyright ©2011 PLANET Technology Corp. All rights reserved.
PLANET Technology Corporation
Tel: [phone] Fax: [phone]
Email: [e-mail] www.planet.com.tw
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
STEP 3: Insert the SATA and power
cable onto the SATA HDD
STEP 1: Remove the upper case
SATA cable x 2 (DVR-872) SATA cable x 3 (DVR-1672)
Quick Installation Guide
DVR-872 / DVR-1672
CD Disk
Power adapter & Power Cord
I/O cable x 1
Battery x 2 Remote control
HDD rack x 4 (DVR-872) HDD rack x 6 (DVR-1672)
Screw kit x 1
STEP 5: Connect the Power and SATA cable into the sockets on the main board.
Make sure that the HDD0 cable has been properly inserted
into HDD0 socket.
Caution: Before hardware HDD installation, please make sure there is no pre-configured partition in this HDD. If yes, please delete all the partition before install.
Contents
Hard Disk Installation
Hardware Connection
STEP 4: Place the HDD
on the HDD plate
2-2
2-3
STEP 2: Lock the HDD holder
symmetrically onto both
sides of the HDD
Lock the screw
HDD2 HDD0
Mouse
Audio Input
Main/Spot Monitor Output
Audio Output
Power Supply
Network Connection
DVR-1672
DVR-872
Main Menu Setup
HDD0
HDD1
HDD2
or
DVD BURNER
STEP 6: The installation has
completed RS485/Relay/Sensor
Camera 1~8
8-CH - DVR-872
16-CH - DVR-1672
Audio Input
Audio Output Camera 1~8
Mouse
Network Connection
Power Supply
Power Switch
NTSC/PAL Switch
To enter the main menu and setup the DVR, please log-in account and enter user password.
The default password of the administrator is “123456”.
Note: For more detailed information, please refer to the User’s Manual in the CD disk.
RS485/Relay/Sensor
HDD0
HDD1
HDD0
HDD2
or
DVD BURNER
VGA Output
(Option)
Main/Spot Monitor Output
VGA Output
(Option)

DVR-872
DVR-1672
DVR-872
DVR-1672
Quick GuideQuick Guide
2011-AB5300-001
their respective owners. Copyright ©2011 PLANET Technology Corp. All rights reserved.
PLANET Technology Corporation
Tel: [phone] Fax: [phone]
Email: [e-mail] www.planet.com.tw
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
STEP 3: Insert the SATA and power
cable onto the SATA HDD
STEP 1: Remove the upper case
SATA cable x 2 (DVR-872) SATA cable x 3 (DVR-1672)
Quick Installation Guide
DVR-872 / DVR-1672
CD Disk
Power adapter & Power Cord
I/O cable x 1
Battery x 2 Remote control
HDD rack x 4 (DVR-872) HDD rack x 6 (DVR-1672)
Screw kit x 1
STEP 5: Connect the Power and SATA cable into the sockets on the main board.
Make sure that the HDD0 cable has been properly inserted
into HDD0 socket.
Caution: Before hardware HDD installation, please make sure there is no pre-configured partition in this HDD. If yes, please delete all the partition before install.
Contents
Hard Disk Installation
Hardware Connection
STEP 4: Place the HDD
on the HDD plate
2-2
2-3
STEP 2: Lock the HDD holder
symmetrically onto both
sides of the HDD
Lock the screw
HDD2 HDD0
Mouse
Audio Input
Main/Spot Monitor Output
Audio Output
Power Supply
Network Connection
DVR-1672
DVR-872
Main Menu Setup
HDD0
HDD1
HDD2
or
DVD BURNER
STEP 6: The installation has
completed RS485/Relay/Sensor
Camera 1~8
8-CH - DVR-872
16-CH - DVR-1672
Audio Input
Audio Output Camera 1~8
Mouse
Network Connection
Power Supply
Power Switch
NTSC/PAL Switch
To enter the main menu and setup the DVR, please log-in account and enter user password.
The default password of the administrator is “123456”.
Note: For more detailed information, please refer to the User’s Manual in the CD disk.
RS485/Relay/Sensor
HDD0
HDD1
HDD0
HDD2
or
DVD BURNER
VGA Output
(Option)
Main/Spot Monitor Output
VGA Output
(Option)