Planet networking & communication Wpg-200n User manual

Note

– 1 – – 2 –

– 3 – – 4 –

1. Package Contents

2. Physical Installation

3. Hardware Installation

– 7 – – 8 –

– 5 – – 6 –

Front Panel Description

Rear Panel Description

WPG-200N Quick Guide CD-ROM

World-Wide Adapter Set AntennasPower Adapter

30FPS

802.11n Wireless

Presentation Gateway

WPG-200N

FURTHER INFORMATION

The above steps introduce simple installations and

configurations for WPG-200N. For further configurations of

the utility (WPG), Virtual Extended Screen, and Wi-Fi

AP-Client etc, please refer to the user’s manual in the CD.

If you have further questions, please contact the local

dealer or distributor where you purchased this product.

2011-E60040-000

Thank you for choosing PLANET WPG-200N. Before

installing the device, please verify the contents inside the

package box.

If there is any item missed or damaged, please

contact the seller immediately.

Step 1: Please turn on your projector first, and connect

HDMI or D-sub cable of the projector to

WPG-200N. Now you can power on WPG-200N.

Step 2: When the projector shows the default screen as

below, it indicates WPG-200N is ready now.

1. First, make sure the Wi-Fi function of your smartphone

or PDA is enabled, and connect the Smartphone or PDA

with WPG-200N.

2. Open the browser of the smartphone or PDA, and it

would redirect to the WPG-200N web page (or you can

enter the default IP address 192.168.1.1 to access it.).

Download the MobiShow client software, and execute

the installation program.

3. Open “Programs” on your smartphone or PDA, and

select “MobiShow” icon to launch the client

software.

4. The SSID of available access points will be listed on

your smartphone or PDA. Select WPG-200N.

Power LED

LAN Port

(Connect to a client PC of Ethernet)

2 dBi Detachable Antenna x 2

(US/EU/UK/AU)

Power Connector

(5V DC Input)

15 Pin D-Sub VGA Port

(Connect to the projector)

Audio Out

(Connect to speaker

or headphone)

HDMI Port

(Connect to the projector)

5. Input the login code displayed on the projector screen,

and the following main menu will be shown on your

phone.

6. Select which feature to use. To project the screen of

your phone, click on the “Screen” icon. To make a

presentation, select the “PtG” icon. To project the

photos from your phone, select the “Photo” icon.

Step 2: Open the web browser and it will redirect to

WPG-200N home page automatically, or you can

enter the default IP address 192.168.1.1 to

access it.

Step 3: Download the client utility (WPG) of Windows

7/Vista/XP and execute it. After installing the

program, you’ll see WPG shortcut on your PC

desktop.

Step 4: Launch WPG on the desktop, then input the login

code. The login code can be found from the

projector screen.

Step 5: Click the button to start projection, or choose

one of the numbers 1~4 to project to the split

screen.

4. Software Installation – Windows

Step 1: Site survey the wireless signal of WPG-200N,

and connect your PC with it wirelessly.

Default IP Address: 192.168.1.1

Default Username: admin

Default Password: admin

* The above hardware installation of WPG-200N is

connected by HDMI cable. The VGA cable works as well.

Default SSID: WPG-200N

* The connection information can be found from the

projector screen.

Note

Please make sure the firewall in Windows will

allow the WPG software to pass through.

Addendum. Windows Mobile 5/6

Power

Adapter

HDMI

Note

– 1 – – 2 –

– 3 – – 4 –

1. Package Contents

2. Physical Installation

3. Hardware Installation

– 7 – – 8 –

– 5 – – 6 –

Front Panel Description

Rear Panel Description

WPG-200N Quick Guide CD-ROM

World-Wide Adapter Set AntennasPower Adapter

30FPS

802.11n Wireless

Presentation Gateway

WPG-200N

FURTHER INFORMATION

The above steps introduce simple installations and

configurations for WPG-200N. For further configurations of

the utility (WPG), Virtual Extended Screen, and Wi-Fi

AP-Client etc, please refer to the user’s manual in the CD.

If you have further questions, please contact the local

dealer or distributor where you purchased this product.

2011-E60040-000

Thank you for choosing PLANET WPG-200N. Before

installing the device, please verify the contents inside the

package box.

If there is any item missed or damaged, please

contact the seller immediately.

Step 1: Please turn on your projector first, and connect

HDMI or D-sub cable of the projector to

WPG-200N. Now you can power on WPG-200N.

Step 2: When the projector shows the default screen as

below, it indicates WPG-200N is ready now.

1. First, make sure the Wi-Fi function of your smartphone

or PDA is enabled, and connect the Smartphone or PDA

with WPG-200N.

2. Open the browser of the smartphone or PDA, and it

would redirect to the WPG-200N web page (or you can

enter the default IP address 192.168.1.1 to access it.).

Download the MobiShow client software, and execute

the installation program.

3. Open “Programs” on your smartphone or PDA, and

select “MobiShow” icon to launch the client

software.

4. The SSID of available access points will be listed on

your smartphone or PDA. Select WPG-200N.

Power LED

LAN Port

(Connect to a client PC of Ethernet)

2 dBi Detachable Antenna x 2

(US/EU/UK/AU)

Power Connector

(5V DC Input)

15 Pin D-Sub VGA Port

(Connect to the projector)

Audio Out

(Connect to speaker

or headphone)

HDMI Port

(Connect to the projector)

5. Input the login code displayed on the projector screen,

and the following main menu will be shown on your

phone.

6. Select which feature to use. To project the screen of

your phone, click on the “Screen” icon. To make a

presentation, select the “PtG” icon. To project the

photos from your phone, select the “Photo” icon.

Step 2: Open the web browser and it will redirect to

WPG-200N home page automatically, or you can

enter the default IP address 192.168.1.1 to

access it.

Step 3: Download the client utility (WPG) of Windows

7/Vista/XP and execute it. After installing the

program, you’ll see WPG shortcut on your PC

desktop.

Step 4: Launch WPG on the desktop, then input the login

code. The login code can be found from the

projector screen.

Step 5: Click the button to start projection, or choose

one of the numbers 1~4 to project to the split

screen.

4. Software Installation – Windows

Step 1: Site survey the wireless signal of WPG-200N,

and connect your PC with it wirelessly.

Default IP Address: 192.168.1.1

Default Username: admin

Default Password: admin

* The above hardware installation of WPG-200N is

connected by HDMI cable. The VGA cable works as well.

Default SSID: WPG-200N

* The connection information can be found from the

projector screen.

Note

Please make sure the firewall in Windows will

allow the WPG software to pass through.

Addendum. Windows Mobile 5/6

Power

Adapter

HDMI

Other Planet Networking & Communication Gateway manuals