G O G R E E N . B E F R E S H .
To fix the handle for the wet grinding / liquidizing jars, insert the metal peg through the handle and align both, the hole on
the handle and the hole on metal peg. Attach these together with the screw provided. Tighten the screwdriver through
the hole on the outer side of the handle.
Speeds: This appliance is provided with a rotary speed switch which has four selections-three speeds and one pulse
setting.
lThe pulse switch is used for the following:
lTo mix the ingredients initially while liquidizing, mixing, etc.
lTo have consistency in grating, using pulse switch intermittently
lTo clean the inside with water after usage
lThe low speed is used for the following : During initial stages of tough tasks like wet grinding, dry grinding of
spices, chutney grinding etc.
lFor liquidizing and mixing
The medium speed is used for all the above usages in the intermediate stage.
The high speed is used for all the whipping, whisking and tough grinding tasks
OPERATION : Ensure that the speed switch is in 'Off' position. Pull sufficient length of the cord and connect the plug
into a standard power supply.
Put the ingredients into the jar. Ensure that the lid is secured in place. Holding the jar by the handle (for liquidizing and wet
grinding jars). Place the jar on the motor coupler. Slowly turn the jar so that the jar coupler is properly seated on to the
motor side coupler. Slowly turn the jar into the locking slot and turn to lock.
How to use your Mixer Grinder
10
