Planet ICA-4480 User manual

H.265 PoE IP Camera
ICA-x80 series
Quick Installation Guide

Table of Contents
1. Introduction ......................................................................................... 3
2. Package Contents................................................................................. 4
3. Requirements....................................................................................... 5
4. Starting Web Management .................................................................... 6
4.1 Logging in to the ICA-x80 Series..................................................... 8
5. RecoveringBacktoDefaultConguration ............................................. 10
Customer Support.................................................................................... 12

3
1. Introduction
Thank you for purchasing PLANET H.265 PoE IP Camera. The “ICA-x80
series” is used as an alternative name in this Quick Installation Guide. The
following is the ICA-x80 series:
ICA-3280 H.265 1080p Smart IR Bullet IP Camera
ICA-4280 H.265 1080p Smart IR Dome IP Camera
ICA-3480 H.265+ 4MP Smart IR Bullet IP Camera
ICA-4480 H.265+ 4MP Smart IR Dome IP Camera
ICA-3480F H.265+ 4MP Full Color Bullet IP Camera
ICA-4480F H.265+ 4MP Full Color Dome IP Camera
ICA-M3580P H.265 5 Mega-pixel Smart IR Bullet IP Camera with Remote
Focus and Zoom
ICA-M4580P H.265 5 Mega-pixel Smart IR Dome IP Camera with Remote
Focus and Zoom

4
2. Package Contents
Open the box of the ICA-x80 series and carefully unpack it. The box should
contain the following items:
zThe IP Camera x 1
zQuick Start QR Code Sheet x 1
zScrew Package x 1
zWaterproof Connector Package x 1
zDrill Template x 1
If any item is found missing or damaged, please contact your local reseller for
replacement.

5
3. Requirements
zWorkstations running Windows 10/11, MAC OS X or later, Linux, UNIX, or
other platforms are compatible with TCP/IP protocols.
zWorkstations are installed with Ethernet NIC (Network Interface Card).
zOne IEEE 802.3af/at PoE switch (Supply power to the ICA-x80 series)
zEthernet Port Connection
Network cables -- Use standard network (UTP) cables with RJ45
connectors.
The above PC is installed with Web browser.
It is recommended to use Chrome to access the ICA-x80 series.
If the Web interface of the ICA-x80 series is not accessible,
please turn off the anti-virus software or firewall and then try it
again.

6
4. Starting Web Management
The following shows how to start up the Web Management of the ICA-x80
series. Note the ICA-x80 series is congured through an Ethernet connection.
Please make sure the manager PC must be set to the same IP subnet
address.
User PC
(192.168.0.X)
PoE Ethernet Switch IP camera
Figure 4-1: IP Management Diagram
1. The ICA-x80 series supports IEEE 802.3af/at standard; be
reminded to power either from AC to DC adapter or 802.3af/
at PoE switch.
2. The AC to DC adapter is not included in the package.
For example, the ICA-x80 series default network type is DHCP Client; to
search the current IP address of the ICA-x80 series, follow the procedure
below:
1. Download the “PLANET Search Tools” utility from the following PLANET
website link: http://www.planet.com.tw/en/support/downloads?method=key
word&keyword=PLANET+Search+Tools&view=6#list
2. Install the “PLANET Search Tools” utility.
3. After the camera utility is launched, all cameras found in your local area
network will be displayed.
4. The existing ICA-x80 series in the local network.
5. Search the ICA-x80 series in the network.
6. Modify the IP parameters of the selected ICA-x80 series.
7.SelecttheICA-x80seriesyouwanttocongureanddouble-clickonit.
8. You will be connected to the ICA-x80 series via web browser automatically.

7
Figure 4-2: PLANET Search Tools Utility Screen
9. Without DHCP server, the ICA-x80 series default IP address is
192.168.0.20, then the manager PC should be set to 192.168.0.x (where
x is a number between 1 and 254, except 20), and the default subnet mask
is 255.255.255.0.

8
4.1 Logging in to the ICA-x80 Series
1. When the following dialog box appears, please enter the default user name
and password “admin”. The login screen in Figure 4-3 appears.
Default IP Address: DHCP client, fallback IP address 192.168.0.20
Default Username: admin
Default Password: admin
Figure 4-3: ICA-x80 series Web Login Screen
The following web screen based on ICA-3480F will be the same
as that of ICA-x80 series.

9
2. After entering the username and password, the main screen appears as
Figure 4-4 and Figure 4-5 show.
Figure 4-4: Web Main Screen of ICA-x80 series
Figure 4-5: Web Main Screen of ICA-Mx580P series
Figure 4-5 is for ICA-M3580P / ICA-M4580P only.
Now, you can use the Web management interface to continue the ICA-x80
series management.
Please refer to the user’s manual for more.

10
5.RecoveringBacktoDefaultConguration
 IP Address has been changed or admin password has been forgotten –
To reset the network type to the default “DHCP Client” with IP address
“192.168.0.20” or reset the login password to default value, press the
hardware-based reset button for about 10 seconds. After the ICA-x80 series
is rebooted, you can log in the management Web interface within the factory
default mode.
Reset
Figure 5-1: Reset Button
For ICA-3280 / ICA-4280 / ICA-3480 / ICA-4480 / ICA-3480F / ICA-
4480F only.