Planet ICA-510 User manual

Dual Mode CCD Dome Internet Camera
ICA-510
Quick Installation Guide

Table of Contents
1. Package Contents ....................................................................... 3
2. System Requirements ................................................................. 4
3. Outlook...................................................................................... 5
Connector of ICA-510 ................................................................. 5
4. Physical Installation .................................................................... 6
5. Setup Tool Installation................................................................. 8
6. Setup Tool Conguration ............................................................12
7. Cam Viewer Lite Installation .......................................................17
Appendix A: Feature Listing for Cam Viewer.....................................21
Appendix B: Suggest Hardware/System Requirement........................22
Appendix C: Ordering Information for Cam Viewer Pro......................23

3
1. Package Contents
● 1 x ICA-510
● 1 x Power Adapter
● 1 x Mounting Screws
● 1 x CD
● 1 x Quick Installation Guide

4
2. System Requirements
Network Interface 10/100Base-TX Ethernet
Monitoring System Recommended for Internet Explorer 6.0 or
above
System Hardware
● CPU: Pentium 4, 1.5GHz or above
● Memory Size: 512 MB or above
● VGA card resolution: 1024 x 768 or above
Optional:
● Sound Card (for PC)
● Microphone (for PC and ICA-510)
● Speaker (for PC and ICA-510)

5
3. Outlook
Connector of ICA-510
AUDIO OUT (Green)
AUDIO IN (Red)
PWR
Video OUT
LAN (PoE)
Connector Description
AUDIO OUT An external speaker can be plugged in.
AUDIO IN An external microphone can be plugged in.
PWR
Connect the supplied power adapter (12VDC 1.0A).
When this camera is obtaining power from PoE, you
don’t have to attach the power adapter to the ICA-
510.
Video OUT Analog video output.
LAN (PoE)
Connect your Camera to a 10/100Base-TX hub or
switch. It is compliant with IEEE 802.3af PoE. Either
mid-span PSE or end-span PSE supported.

6
4. Physical Installation
1. Hold the base and rotate the cover to open this camera.
2. Use the provided screws to mount the camera on the ceiling.
3. Attach the provided power adapter to the camera’s power connector.
If there is a PoE switch/hub existing, you can connect the ICA-
510 LAN port to your PoE switch/hub to power up. If this camera
is obtained power from PoE, you don’t have to attach the power
adapter.
Note
Please use the power adapter that is bundled in package.
Using a power supply with a different voltage rating will
damage and void the warranty for this product.

7
4. Set camera face to the location you want, and you can connect the
Video Out connector to a monitor then turn the lens to adjust focus.
5. When the position and focus adjustment done, rotate the housing
back to the main base and then turn the hemisphere cover to the
proper direction.
6. Connect ICA-510 LAN port to your network device, if it is not power
up from PoE switch/hub.

8
5. Setup Tool Installation
Initial setup should be performed by using the supplied Windows-based
Setup Tool as follows:
1. Insert the bundled product CD into CD-ROM drive to launch the
autorun program.
2. When the web page displayed, select and click the “Setup Tool”
hyperlink on the menu to start the installation process.
Note
If the CD’s menu does not appear, click “Start” on
the task bar and select “Run” to type “X:\Utility\
SetupTool.exe”, assume X is your CD-ROM drive.
3. Click “Yes” to start the Setup Tool Installation.
4. Choose the language you need, and click “Next” to continue.

9
5. Follow the step for conguring the Setup Tool, and click “Next” to
continue.
6. If you wish to install the Setup Tool in an alternative location, click
“Browse” and dene a location; otherwise click “Next” to continue.

10
7. If you wish to install the Setup Tool in an alternative folder of start
menu, type a new folder or select one of the exiting ones; otherwise
click “Next” to continue.
8. Check the installation summary, and click “Install” to start the
installation.