Plantin 517659 User manual

0You must read these instructions carefully before you start to assemble this greenhouse.
Please carry out the steps in the order set out in these instructions.
Keep these instructions in a safe place for future reference.
IMPORTANT
(Internal Dimensions)
ASSEMBLY INSTRUCTIONS
GREENHOUSE SHED 6'x8'
Step ladder
Spirit level
Large hammer for ancors
We strongly recommend the use of work gloves during assembly as aluminium profiles may have sharp edges.
Do not attempt to assemble the greenhouse in windy or wet conditions.
Take special care not to touch overhead power cables with the aluminium profiles.
Always wear shoes and safety goggles when working with extruded aluminium.
Dispose of all plastic bags safely - keep them out of reach of small children.
The greenhouse must be positioned and fixed on a flat level surface.
Do not lean against or push the greenhouse during construction.
Keep children away from the assembly area - the aluminium profiles may have sharp edges.
Do not position your greenhouse in an area exposed to excessive wind.
Do not attempt to assemble this greenhouse if you are tired, have taken drugs or alcohol or if you are prone to dizzy spells.
If using a step ladder ensure that you follow the manufacturers safety advice.
If using power tools always follow the manufacturers instructions.
Hot items such as recently used grills, blowtorches etc. must not be stored in the greenhouse.
Ensure there are no hidden pipes or cables in the ground before inserting the ground stakes.
SAFETY ADVICE
See over for contents
If help is required seek professional advice within store.
Silicone Sealant & Applicator
Tape measure
Work gloves
Rubber mallet
Crosshead screwdriver
TOOLS & EQUIPMENT REQUIRED
This is a multi-part assembly.
Selecting a site - choose a sunny level position for your greenhouse away from overhanging trees.
Area needed - 266.6cm/104.5" Length x 211.9cm/83".
It is advisable to use a lubricant to ease connection between aluminium profiles and panels.
The component parts should be checked and laid out in an orderly way, close at hand.
Keep all small parts (screws etc.) in a bowl so they do not get lost.
Note that the door is hinged on the right hand side and therefore opens to the right.
Keep roof clear of snow and leaves.
GENERAL ADVICE
Wrench 10
TOOLS & EQUIPMENT REQUIRED
When your greenhouse needs a clean, use a mild detergent solution and rinse with cold clean water.
DO NOT use acetone, abrasive cleaners or other special detergents to clean the clear panels.
When opening the greenhouse door do not pull the handle fiercely.
CARE & MAINTENANCE
For general support and replacement part please contact in:
*UK Replacement parts - contact UK Customer services helpline: 0121 506 0008
Fax: [phone] Email: [e-mail]
*Canada 1-800-661-6721.
Overall Dimensions (approx.)
97.5” L • 76” W • 76” H
247.4 L • 193 W • 193 H cms
Kibbutz Lotem
P.M Carmiel 20124
Israel
Please keep the tracking number appears on the box.
Please refer to this number when calling the service office for questions
and complains.
VER09_05
Lubricant
ITEM: 517659

PP3
PP5
PP6 1
PP7
PP1C
PP2
10
1
15
1
A11 570mm 22.4” 6
590mm 23.2” 3
1035mm 40.7” 8
1400mm 55.1” 6
1
1
7R
40
M34
C55 2R
2L
2T
M69
1
M57
2R
2L
M66
M68 4
4
M56
M70
M72
M35 7L
A71
M19
3
M31N 1
M47
1
M36
M10D
M10A 8
1
4
M32
3
M9 2
A64
A15
A14N 335mm 13.1” 1R
335mm 13.1” 1L
1390mm 54.7” 2
A16
A13
408mm 16” 2
A60
1020mm 40.1” 4
1400mm 55.1” 4
1290mm 50.7” 2
1190mm 46.8” 4
1195mm 47” 2
A61
910mm 35.8” 6
1190mm 46.8” 4
12
PP4
A40
665mm 26.1” 2
408mm 16” 1
1290mm 50.7” 1
650mm 25.5” 2
1390mm 54.7” 2
596mm 23.4” 1
1
M31O
5
4
PP1G
PP8C
1L
1R
2R
2L
PP8G
CONTENTS
ITEM MM QTY.
ITEM MM QTY.
CONTENTS
ITEM MM QTY.
ITEM MM QTY.

1 2
A11
1400
A11
1400
3
PP3
A11
1400
PP1C
A11
1400
PP3
PP3
!
(a)
(c)
!
(b)
(a)
(b) (c)
A11
PP1
PP1C
PP1C
PP1C
PP1C

6
A11
1400
5
4
PP3
PP3
A64
1190
A64
1190
A64
1190
M68
M69
A64
1190
A64
1190
(a) (b)
(c)
(a)
(b)
(a)
(b)
(c)
PP1G
PP1G

8
PP3
A14N
1390
A14N
1390
A14N
1390
(b)
(a)
A64
1190
A64
A64
(1,2) (3) (4) (5) (6,7)
7
A64
1190
M68
PP1G
PP1G
!!

PP3
PP1G
PP3
PP1G
9 11
A14N
1390
10
PP1G
PP3
PP1G
PP3
A14N
1390
PP1G PP3
PP1G
A11
590
PP7 A11
590
PP1G
PP7
12
A14N
1390
!!
!
(a)
(b)
!
PP4
PP4
PP3
PP1G
PP1G PP3
PP1G
PP8C
PP8C
A14N
335
(a) (b)
M10A
M10A
M10A
PP4
PP4
PP1G
PP1G

PP3
PP1G
PP3
PP1G
A11
570
14
13
PP3
PP8C
PP8C
A11
570
15
16 A15
1290
!
PP3
PP8C
A64
910 A64
910
A64
910
(a)
A64
910
M69
M68
A64
910
A64
910 (b) (c)
PP8C
PP7
PP1C
PP3
A15
1290
10cm
PP4
PP4
PP7
PP1G
PP1G
PP1G
PP1G

18
PP1C
PP3
PP1C
PP3
M31N
M32
17
PP1C
PP3
10cm
A16
1290
A64
PP1C
PP3
PP1C
PP3
A64
A64
M31N
20
19
(a)
A64
910
M69
M68
A64
910
A64
910
(b)
(c)
M31N
M32

(a)
(b)
21
A13
1400
(c)
22 (a)
A13
1400
(c)
(b)
!

23
PP1C
PP3
PP1C
PP3
5mm
5mm
PP3
PP3
24
(b)
A13
1400
(a)
(b)
A13
1400
!

(a)
(b)
25
5mm
5mm
26
(a)
(b)
(c)
(c)
M70
A64
910
PP3
M31O
A11
1035
!

28
27
30
29
(e)
(f)
(g)
(g)
(d)
A64
910 PP3
A11
1035
PP3
PP3 PP1G
PP1G

31
(h)
!
32
(i)
(j)
!
A40
1390
A40
1390
!

3433
A11
1035
(a)
M10A
(b)
(b)
A11
665
A11
1035
A11
665
A11
570
A11
570
PP8G
PP8G
A11
665

35 36
A13
1400
10cm
10cm
R
LM66
1400
A60
1190
!
!
!

37 38
A60
1190
A13
1400
PP1G
PP1G
A60
1190
PP1G

39 40
A13
1020
A13
1020
A13
1020
A61
1195
A61
1195 A61
1195
20cm
(a)
(b) (c)
PP1G !

A11
1035
(d)
(c)
(b)
(a)
(e)
A61
1195
A11
1035
41 42
(b) (c)
(a)
M69
M34
M35
M47
PP1G
PP1C
!

44
M10D
(a)
(b)
(b)
(b)
(a)
(a)
M10D
A60
1190 A60
1190
A60
1190
A60
1190
A60
1190
M10D
30cm
43
(a)
INSIDE
(b)
(c)
INSIDE
M34
M35
M69
M36
!
!

klick!!
(b)
(c)
(d)
(e)
(d)
(e)
PP5
45 46
PP5
(a)
A71
8mm