Plantronics Voyager 100 Series User manual

Voyager 100 Series
User Guide

The first time you power on your headphones, the pairing process begins.
1Slide the power switch on. You hear "pairing" and the LEDs flash red and blue.
2Activate Bluetooth®on your phone and set it to search for new devices.
•iPhone Settings > Bluetooth > On*
•Android Settings > Bluetooth: On > Scan for devices*
NOTE *Menus may vary by device.
3Select “PLT V100 Series.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the LEDs stop flashing.
Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue.
1Ensure NFC is on and your phone’s display is unlocked.
2Tap and hold the headphones to the phone’s NFC tag location until NFC pairing completes. If
necessary, accept the connection.
TIP Keep an eye on your Smartphone's screen for prompts to start and accept the pairing process.
Pair
Get Paired
Pair second device
NFC pairing
3

For the best fit and sound quality, adjust the headband.
1Lengthen or shorten the headband until the ear cushions fit comfortably over your ear.
2Position the stabilizer T-pad above your ear.
3Stretch and bend your headset for a perfect fit.
4To wear the microphone on the other side, rotate the boom up and over.
5Adjust the boom so it points to the corner of your mouth.
Fit
4

It takes up to 2 hours to fully charge your headphones. The LED turns off once charging is
complete.
TIP To check the battery status, press the power button towards the Bluetooth button while wearing
your headphones and not on a call.
Charge
5

voice
Mute/unmute (during a call)
Activate voice assistants such as Siri®and Google Now™(while not on a call)
Call button
Redial
Play/pause*
Charge port
Power button
Bluetooth pair
Volume up button
Track forward*
Volume down button
Track backward*
NOTE *Functionality varies by application.
Slide the switch to power on or off.
Answer or end a call
Tap the Call button.
Answer a second call
First, tap the Call button to end current call, then tap the Call button again to answer new call.
The basics
Headset overview
Power on/off
Make/Take/End Calls
6

Redial last outgoing call
Double-tap the Call button.
Activate voice assistant
If your smartphone has a voice-enabled assistant, press and hold the Mute button for 2 seconds
and wait for the phone prompt.
While on an active call, tap the red Mute button.
Tap the Volume up (+) or down (–) button.
Tap the Call button.
Press and hold the Volume up (+) button for 2 seconds to skip to the next track.
Press and hold the Volume down (–) button for 2 seconds to track backwards and play the
previous track.
Mute
Adjust the volume
Play or pause audio
Track forward
Track backward
7

Support
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc. Plantronics B.V.
345 Encinal Street
Santa Cruz, CA 95060
United States
Scorpius 171
2132 LR Hoofddorp
Netherlands
©2018 Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other trademarks are the property of
their respective owners.
Patents pending.
212548-06 (03.18)