Plantronics BackBeat GO 600 User manual

BackBeat GO 600 Series
User Guide

Contents
Pair 3
Get Paired 3
Pair second device 3
Pair to Mac 3
Charge and fit 4
Charge 4
The basics 5
Headset overview 5
Power on off 5
Play pause music 5
Track selection 5
Activate voice assistant 5
Adjust the volume 5
Make Take End Calls 6
Mute 6
Find your headset 6
Support 7
2

Pair
Get Paired The first time you power on your headphones, the pairing process begins.
1 Slide the power switch on. You hear "pairing" and the LEDs flash red and blue.
•iPhone and Android Follow the voice-guided pairing instructions.
•Other phones Use your phone's menu to:
2Activate Bluetooth® on your phone and set it to search for new devices.
3Select “PLT BB600 Series.”
If necessary, enter four zeros (0000) for the passcode or accept the connection. Once
successfully paired, you hear “pairing successful” and the LEDs stop flashing.
Pair second device 1Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue.
2 Select “PLT BB600 Series” in your device's Bluetooth Settings.
Pair to Mac If your Mac is Bluetooth enabled, you can pair your headset to it.
1Place your headset in pair mode (slide and hold the power button towards the
Bluetooth icon). You will hear "pairing" and the LEDs will flash red and blue.
2On your Mac, choose Apple menu > System Preferences > Bluetooth.
3Click Set Up New Device or "+", select "PLT BB600 series stereo" and follow
the onscreen instructions.
3

Charge and fit
Charge It takes up to 90 minutes to fully charge your headset. The LEDs turn off once
charging is complete.
TIP To check the headset battery status, tap the Call button while wearing your
headset. Headset must be in idle state.
Your headset has up to 18 hours of listening time.
4

The basics
Headset overview
BASS BOOST
Mute unmute
Volume up
Volume down
Play pause music
Track forward
Track backward
Bluetooth pair button
Power on off
Bass boost
BASS BOOST
Call button
Power on off Slide the switch to power on or off.
Play pause music Tap the Play pause button.
Track selection Press the Track forward or Track back buttons as desired.
NOTE Functionality varies by application. May not function with web-based apps.
Activate voice assistant If your smartphone has a voice-enabled assistant, press and hold the Call button
for 2 seconds and wait for the phone prompt.
Adjust the volume To adjust the volume, tap the Volume up or Volume down button.
Adjust headset icrophone volu e (softphone)
Place a test softphone call and adjust softphone volume and PC sound volume accordingly.
5

Make Take End Calls Answer or end a call
Tap the Call button or use your softphone.
Decline a call
Press and hold the Call button for 2 seconds.
Redial last outgoing call
Double-tap the Call button.
Mute During a call, press the Volume up and Volume down buttons. You hear "mute on off."
Find your headset Most headsets are found under car seats, in pockets or on a messy desk. For
less obvious locations, locate your headset by sending a tone to find it.
1 Download the Plantronics Hub app for iOS and Android by visiting plantronics.com software.
2Locate your lost headset by using Find MyHeadset within the Plantronics Hub app.
6