Plantronics BackBeat 903+ Technical manual

TIPS
Z109
N10687
© 2010 Plantron ics, Inc. All Rig hts Reserved . Bluetooth
is a register ed trademark of Blu etooth SIG, Inc . and any
use by Plantro nics is under licen se. All other tra demarks
are the prope rty of their res pective owner s.
U.S. Patent s Pending 83987-21 (06/10) A M83988-21
TAKE A GOOD LOOK CONNECT TO YOUR PHONE
1. READY
Activate the Bluetooth feature on your
device, then get it to add / search for /
discover new Bluetooth devices.
Phones have different menus to select from:
iPhone: Settings > General > Bluetooth > On
(starts the search for devices)
BlackBerry® smartphone: Set tings/options >
Bluetooth: On > Search for devices
VIDEO TUTORIAL:
www.plantronics.com/pairing
3. CONNECT
Select “PLT_BB903+” from the list of
Bluetooth devices shown on your device.
If device asks for a passcode, enter four
zeros (0000). You may see **** on screen.
Some devices also ask to confirm
connection after pairing.
The headphone's LED will stop flashing
red/blue once successfully paired/connected.
You can now make a call using your device’s
keypad or voice-dialing feature.
NEED MORE HELP?
24-hour support in USA:
1-866-363-BLUE (2583)
Online user guide:
www.plantronics.com/documentation
1-year limited warranty details:
www.plantronic s.com/warranty
Stay Near Your Device:
Bluetooth has a working “range” of up to
30 feet between the device and headphones
before audio degrades and the connection
is lost. For best audio reception, keep your
device on the left side of your body.
Know How to Reconnect:
Your headphones try to reconnect a lost
connection. If they can’t, then tap the Call
button once or manually reconnect via the
device’s Bluetooth menu.
ADJUST THE FIT
Understand the Lights You See:
The LED will advise status of headphones.
• Charging (solid red)
• Fully charge d (solid blue)
• Low bat tery (2 red flashes every
15 minutes)
• On a call (blue flash ever y 2 seconds)
• Missed call (3 purple flashes. Repeats
for 5 minutes or until cancelled.)
• Pairing mode (repeating red/blue flashes)
GET
STARTED
BackBeat®903+
Bluetooth®Headphones
Bluetooth wireless technology provides
a way for devices, like headphones and
phones, to communicate with each other
without wires.
“Pairing” is the set-up process of introducing
your headphones to your phone. Before
using your headphones for the first time,
you must pair them with your Bluetooth-
enabled phone.
Pairing is a one-time process unless your
phone loses the connection or you want to
pair to a new phone.
2. SET
First time, right out of the box:
With headphones turned off, activate
Bluetooth pairing mode by pressing
Power/Pairing button on. The LED flashes
red/blue to indicate pairing mode.
Pairing new phone/reconnecting original:
With headphones turned off, press
Power/Pairing button until the LED flashes
red/blue.
1. READY 2. SET 3. CONNECT
Check the Battery Level:
If you are on a call or listening to music and
hear 3 high tones then you have under 5
minutes talk time remaining.
At other times, you can check the battery
level by tapping the Power button. The
headphones will say how many hours of of
use remain. The LED also flashes red to
show the charge level.
1 flash = more than 2/3 full
2 flashes = 1/3 - 2/3 full
3 flashes = less than 1/3 full
For the best sound performance and a
secure, comfortable fit, be sure to adjust the
headphones to rest gently in your ear and
drape around the back of your neck.
1. Drape the stereo cable behind your neck.
2. Guide one earpiece behind your ear and
secure the eartip inside your ear using the
telescoping/swivel adjustments.
3. Repeat step 2 with the other earpiece and
continue to adjust the fit in either ear until
both eartips rest comfortably and
securely in your ears.
MUSIC BUTTON
• Play/Pause (1 tap)
• Bass Bo ost (2-second press)
• Mute Musi c or Call (1 tap)
• Enable/dis able OpenMic™ to pause m usic and
activate mic (1 t ap)
POWER/PAIRING B UTTON
• On/Off ( 2-second press to tu rn on,
4 second pres s to turn off)
• Activa te pairing mode afte r initial set up
(press until r ed/blue LED flashes)
• Check bat tery level (1 ta p)
VOLUME/TRACKING BUTTONS
• Volume Up/D own (1 tap per level c hange)
• Track Forwa rd/Back (2-second pr ess per track chan ge)
CALL BUTT ON
• Take a call or end it ( 1 tap)
• Redial (2 taps)
• Initiate p hone’s voice-dia ling
(2-second pre ss until tone is heard )
• Reconne ct lost Bluetoot h connection
(1 tap if the he adset doesn’t au tomatically reco nnect)
• Cancel mi ssed call LED (1 tap)
• Reject a c all (2-second press)
• Transfer call t o/from phone (during ca ll, 2-second press)
• Enable/dis able Online Indicato r (while powered on, 2-s econd
press Call and Vol ume Up buttons)
MICRO USB CHARGING PO RT
• Use with th e AC wall charger:
1 hour before fir st use
3 hours (100% charg e)
• Do not us e headphones while cha rging
PLT_ BB9 03+
+
-
LED
Area covered
by band
Project: GSG, ACCORDION, PSD, BB903, EN
Date: 06/15/10
Component: Accordion User Guide
File Name: 83988-21_BackBeat903+_061510
Art Master Number: 83988-21
Part Number: 83987-21
Scale: 1:1
Resolution: 300dpi
Links: N/A
Fonts: Gesta Light, Regular, Medium, Bold
Software: CS3
Printing Method: Offset Lithography
Inks:
Process Black
PMS 294
PMS 151
Finishes: OVERALL MATTE VARNISH
Notes: FINAL
Designer: Malika Henderson
Company: Oak Hill Corporation
E-mail: [email protected]
Phone: [phone]
Project Specifications