Platinum CCTV AD-2000 User manual

Platinum CCTV Surveillance Solutions
AD-2000 CCD Armor Dome Camera
Installation Manual
Indoor/Outdoor Vandal-Resistant
CCD Armor Dome 480 TVL Camera
w/ 3.6mm Wide-Angle Lens
For Warranty Registration, visit
http://Platinum-CCTV.com

Platinum CCTV Surveillance Solutions
Camera Installation
1. Camera Mounting:
Items Needed:
Screwdriver, Drill, Mounting Hardware (not
included), Glove or Cloth for moving Dome, Pencil
a. Remove Dome
b. Mark wall through Mounting Holes
c. Drill Holes for mounting
d. Drill Hole for Cables

Platinum CCTV Surveillance Solutions
Camera Installation
e. Connect Cables
Top = BNC Video Connector
Bottom = Power Connector
f. Insert Drywall Anchors (Drywall
Mounting Only *Not Included)
g. Insert Screws
h. Adjust camera angle to suit needs
i. Reinstall Dome

Platinum CCTV Surveillance Solutions
AD-2000 CCD Color Dome Camera
Image Sensor Sony 1/3” CCD Sensor
Number of Pixels NTSC: 620 (H) x 492 (V)
Lens 3.6mm (~92 degrees)
Sync System Internal Synchronization
Resolution 480 TVL
Dimensions 108mm (D) x 74mm (H)
Video Output 1.0Vp-p75Ω
S/N Ratio >50 dB
Shutter Time 1/60-1/100,000 Sec.
Operation Temp. 32°F ~ +122°F
Storage Temp. 23°F ~ +131°F
Useable
Illumination 0.5 Lux (F:1.2)
Power Source DC 12V 135 mA
Installation Notes
•For Indoor & Outdoor Use
•Disassembly of camera is not recommended
•Handle lens carefully with gloves to prevent damage
from oil on your hands
•Handle with care
•To prevent shock, do not plug in camera with dome
removed
•Never touch lens directly
•Clean the dome occasionally with a dry micro-fiber
cloth, or plastic cleaner only – Do not use abrasive-
type cleaners as they will scratch dome