Platinum CCTV CD-8260 User manual

Platinum CCTV Surveillance Solutions
CD-8260 SONY Indoor/Outdoor
Day/Night Long-Range Infrared
Varifocal 420 TVL Camera
Installation Manual
Outdoor Varifocal Hi-Res Day/Night
Infrared CCD Armor Dome Camera
For Warranty Registration, Visit
Http:// Platinum-CCTV.com

Platinum CCTV Surveillance Solutions
Camera Installation
1. Camera Mounting:
Items Needed:
Screwdriver, Drill, Mounting Hardware (not
included), Pencil
2. Loosen and remove the 3 allen screws near the
base with included allen wrench
3. Place the bracket on the wall and mark to drill
holes. Mount bracket to wall or ceiling.

Platinum CCTV Surveillance Solutions
Camera Installation
4. Reinstall camera ball onto the bracket and adjust
camera to the proper angle then re-tighten allen
screws to hold the camera solid.
5. Adjust Zoom/Focus with 2 adjustment screws
Note: BOTH adjustments need to be adjusted.

Platinum CCTV Surveillance Solutions
CD-8260 Long Range IR CCD Camera
Image Sensor 1/3” SONY Low-Light CCD
Number of Pixels NTSC: 540 (H) x 491 (V)
Scanning System 15.7343Khz (H), 60 Hz (V)
Sync System Internal Synchronization
Resolution 420 TVL
Lens 3.5-8mm Varifocal Lens (Ext. Adjust)
Video Output 1.0Vp-p75Ω
S/N Ratio >52dB
Shutter Time 1/60-1/100,000 Sec.
Operation Temp. -20°C ~ +50°C
Storage Temp. -30°C ~ +60°C
Useable
Illumination
0.5 Lux (F:2.0), 0 Lux (IR On)
Power Source DC 12V 700mA
Installation Notes
•For Indoor or Outdoor Use
•Disassembly of camera will void warranty
•Remove protective film from lens before use
•Handle with care
•Never touch lens directly
•Clean the lens occasionally with a dry micro-fiber
cloth, or plastic cleaner only – Do not use abrasive-
type cleaners as they will scratch lens