pleasant hearth OFW307R User manual

1
Serial Number Purchase Date
ATTACH YOUR RECEIPT HERE
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-447-4768, 8:30 a.m. – 4:30 p.m. CST, Monday – Friday, or
e-mail us at [email protected]
KILLIAN FIRE PIT
MODEL #OFW307R
Français p. 17
Español p. 9
30-01-166 Rev. 04/25/18

2
PACKAGE CONTENTS FOR OFW307R
PART DESCRIPTION QTY
APoker Bracket 1
BMesh Cover 1
CCooking Grid 1
DFire Bowl 1
ERing Bracket Pad 2
FRing Bracket 2
GDecorative Ring 2
HLegs 4
ILeg Support Ring 1
JPoker 1
C
J
A
A
E
F
B
D
I
H
G

3
HARDWARE LIST
M6x10mm
Bolt
Qty. 16
Wrench
Qty. 1
M6 Nut
Qty. 5
Threaded Peg
Qty. 4
AA BB CC DD
Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product, please call customer service at
1-877-447-4768, 8:30 a.m. – 4:30 p.m. CST, Monday – Friday.
WARNINGS:
• DO NOT allow children or pets near the re pit without supervision.
• DO NOT touch surface of re pit while in use.
• FOR OUTDOOR USE ONLY! Burning wood and charcoal indoors can kill you. It gives off
carbon monoxide, which has no odor.
• NEVER burn in vehicles, tents, garages, other enclosed areas or indoors. CARBON
MONOXIDE HAZARD.
• NEVER LEAVE FIRE UNATTENDED!
• NEVER place a storage cover on re pit when in use. Ensure the re pit has cooled before
placing a storage cover over the re pit.
• When the re pit is in use, the poker bracket on the mesh cover can reach extreme
temperatures that can cause serious injury to an unprotected hand. Use a poker when
handling.
• DO NOT use under overhead cables or power lines.
CAUTIONS:
• Adequate re extinguishing material should be readily available.
• Always ensure that the mesh cover is secured over re bowl while in use.
• Burn only seasoned hard wood or re logs in the re pit.
• DO NOT attempt to move the re pit while it is hot or in use.
• DO NOT use gasoline or kerosene to start the re in your re pit.
• DO NOT use this outdoor re pit under any overhead or near any unprotected combustible
constructions. Avoid using near or under overhanging trees and shrubs. DO NOT use this unit
on long or dry grass and/or leaves.
• Always use this outdoor re pit on a hard, level, non-combustible surface such as concrete,
rock or stone. An asphalt or blacktop surface may not be acceptable for this purpose. DO NOT
use on wooden decks.
• Place the re pit no closer than 10 feet / 3.05 meters from walls or combustibles during use.
• Poker handle may become hot during and after use.
• Use heat-resistant gloves to handle hot tools.
SAFETY INFORMATION
This product and the fuels used to operate this product (charcoal or wood), and the products of
combustion of such fuels, can expose you to chemicals including carbon black, which is known
to the State of California to cause cancer, and carbon monoxide, which is known to the State of
California to cause birth defects or other reproductive harm.
For more information go to www.p65Warnings.ca.gov
WARNING

4
PREPARATION
ASSEMBLY INSTRUCTIONS
1. To attach the decorative rings (G), insert
two M6 x 10mm bolts (AA) through the ring
bracket (F), over the decorative ring (G) and
through the holes in the ring bracket pad (E).
Then insert the same bolts through the pre-
drilled holes in the re bowl (D) as illustrated
in gure 1. Tighten with two M6 nuts (BB)
using the wrench and a Phillips screwdriver.
Repeat this step for the other decorative ring
(G) on the other side of the re bowl.
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do
not attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 25 minutes
Tools Required for Assembly: Phillips Screwdriver (Not Included). Wrench (included).
EE
1
Hardware Used
AA M6x10mm Bolt
M6 Nut
x 4
x 4
BB
AA
BB
Wrench
DD
E
G
D
F

5
ASSEMBLY INSTRUCTIONS
2. Insert eight M6 x 10mm bolts (AA) though the
holes in the rebowl (D) and into the rivet nut
in the legs (H). Use a Phillips screwdriver to
loosely tighten the M6x10mm bolts (AA), but
do not fully tighten at this time.
3. Attach the leg support ring (I) to the legs
(H) by inserting four M6 x 10mm bolts (AA)
through the holes in the support ring and into
the rivet nuts in the legs. Tighten all bolts
including those from the previous step with a
Phillips screwdriver.
2
3
4. Finger tighten four threaded pegs (CC) to
the inside of the re bowl (D) as illustrated
in gure 4.
4
AA
CC
AA
M6x10mm Bolt
Threaded Pegs
M6x10mm Bolt
x 4
x 4
x 8
Hardware Used
Hardware Used
Hardware Used
H
AA
I
CC
H
D
D
AA

6
7
ASSEMBLY INSTRUCTIONS
5. Insert the poker bracket (A) into the hole in
the mesh cover (B) using one M6 nut (BB).
Tighten with the wrench (DD).
5
To use the re pit as a barbeque, place
the cooking grid (C) on the threaded pegs
(CC) as shown in gure 6-2. Top with the
mesh cover (B).
6-1
7. Your re pit is now ready for use. Place the
poker (J) near the re pit for use as needed.
Hardware Used
BB M6 Nut x 1
BB
B
A
6-2
6.1
To use the re pit, place the mesh cover (B)
over the re bowl as shown in gure 6-1.
6.2 B
B
C
J
CC
Wrench
DD

7
CARE AND MAINTENANCE
• Allow the re pit to cool completely before moving the re pit.
• To extend the life of your re pit, clean it after each use.
• To protect re pit nish, use a soft cloth to wipe re pit and poker.
• Do not attempt to clean while hot.
• Store in a cool, clean, dry place.
• Clean re bowl after each use once ashes have cooled.
• Place a storage cover over the re pit once it has cooled.
GHP Group, Inc.
6440 W. Howard St.
Niles, IL 60714-3302
877-447-4768
ONE YEAR LIMITED FRAME WARRANTY
If within one year from the date of original purchase, this item fails due to a defect in material or
workmanship, we will replace or repair at our option, free of charge. To order parts or to obtain
warranty service, call 1-877-447-4768, 8:30AM – 4:30PM, CST, Monday – Friday. This warranty
does not cover defects resulting from improper or abnormal use, misuse, accident, or alteration.
Failure to follow all instructions in the owner’s manual will also void this warranty. The manufacturer
will not be liable for incidental or consequential damages, or common erosion of outdoor products.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation may not apply to you. This warranty gives you specic legal rights, and you may also
have other rights which vary from state to state.

8
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-877-447-4768, 8:30 a.m. – 4:30 p.m.,
CST, Monday – Friday.
Printed in China
PART DESCRIPTION PART #
APoker Bracket 40-07-453
BMesh Cover 30-01-147
CCooking Grid 30-01-247
DFire Bowl 30-01-248
ERing Bracket Pad 30-01-249
FRing Bracket 30-01-194
GDecorative Ring 30-01-195
HLegs 30-01-250
ILeg Support Ring 30-01-251
JPoker 40-04-409
AA-DD Hardware Pack 30-09-542
N/A Instruction Manual 30-01-166
DD
AA
A
BB
A
CC
AA
BB
CC
DD
C
J
A
A
E
F
B
D
I
H
G

9
Número de serie Fecha de compra
ADJUNTE AQUÍ SU RECIBO
¿Preguntas, problemas, piezas faltantes? Antes de hacer una devolución a la tienda, llame
a nuestro Departamento de Atención al Cliente al 1-877-447-4768, de lunes a viernes de
8:30 a. m. a 4:30 p. m. hora central estándar, o escriba a [email protected].
BRASERO KILLIAN
MODELO N.° OFW307R
Français p. 17
English p. 1
30-01-166 Rev. 03/29/18

10
CONTENIDO DEL EMBALAJE DE OFW307R
PIEZA DESCRIPTIÓN CANT.
ASoporte para el atizador 1
BCubierta de malla 1
CParrilla de cocción 1
DContenedor de brasas 1
ERing Bracket Pad 2
FRing Bracket 2
GDecorative Ring 2
HPatas 4
ILeg Support Ring 1
JAtizador 1
C
J
A
A
E
F
B
D
I
H
G