Plevo Runner User manual

RUNNER
User's manual

01RUNNER Manual del usuario
Contents
Chapter 1: Overview of the PLEVO Runner.
Chapter 2: First steps.
Download the PLEVO App.
Turning on the suitcase.
Pairing.
Chapter 3: Removable battery.
Parts and characteristics.
Installation.
Extraction.
Loading devices.
Backup battery.
Chapter 4: Removable wheels.
Installation.
Disassembly.
Chapter 5: Opening and closing the suitcase.
General components of the closure.
Electronic opening and closing by Face ID / Touch ID.
Electronic opening and closing by Morse Code.
Opening with a key.
Chapter 6: Digital scale.
Sensors.
Using the scale.
Chapter 7: Rear compartment - Quick access
Opening.
Closing.
Storing a notebook.
Chapter 8: Dispatch and withdraw a PLEVO suitcase.
Chapter 9: Lights.
Indicator lights and lock alerts.
Indicator lights and alerts on the front board and panel.
03
04
04
04
05
07
07
07
08
09
10
11
11
12
13
13
14
16
19
20
20
20
22
22
22
23
24
25
25
26

RUNNER User's manual 02
Chapter 10: Search for a mobile device.
Chapter 11: Shutting down the suitcase.
Chapter 12: Unlinking a device.
PLEVO Runner - User's manual
2019
27
28
28

01 - Overview of the PLEVO Runner
Below are the external components of the suitcase.
03
Main handle button
Battery access cover
Rear electronic
closure
Rear cover
Dashboard
Rear badge
Handle structure
Wheel fastener
Main handle
Indicative Front
light
Front Badge
Front Cover
Secondary handle
Front electronic
closure
Removable wheel
RUNNER User's manual
Note: Some external components of the Runner model vary between the Infinite and UP models.

04
02 - First steps
Download the PLEVO App
In order to start using all the electronic functions of the suitcase it is necessary to
download the PLEVO App in the App Store for the iOS operating system or in Google
Play for the Android system.
Follow the steps indicated in the App to perform the registration and be able to access
the different functions.
Turning on the suitcase
After registering in the App it is necessary to turn on the suitcase to make the pairing
between a mobile device and the PLEVO Runner.
- Press the Power Button for 2 seconds until you hear the warning sound. Doing so for
the first time will show a flash of red light on the board and the front panel.
Red light
Flash every 2.5 seconds
Indicates that the suitcase is available to pair with a
device via Bluetooth.
Scan the code to download
Scan the code to download
RUNNER User's manual

05
Pairing
To connect your Runner suitcase with a mobile device, follow these steps:
1) Activate the Bluetooth of your mobile device.
2) Select the model of your suitcase in the App and bring the device close to the
suitcase's board for two seconds until the CYAN lights on the board and front panel gets
turn on.
on/off button
Raise the main handle to access the button.
Dashboard
Front panel
CYAN light
Single ignition for 8 sec.
CYAN light
Flash every 10 sec.
Indicates that the suitcase has just been successfully
linked to a mobile device.
Indicates that the suitcase is linked to a mobile
device.
RUNNER User's manual

06
Important: In case of problems in pairing with Android devices, we recommend that you
move the phone closer to the board to improve the Bluetooth connection. After making
the connection with the suitcase, the user can get away from it perfectly and use the
different functions.
RUNNER User's manual

07
03 - Removable battery.
All PLEVO suitcases incorporate a removable 8,000 mAh battery that supplies power to the
internal backup battery and allows the charging of mobile devices.
Parts and characteristics
Installation
Raise the main handle and access the rubber
cover located on the back of the board. This
cover protects the internal components from
blows, dust, and water, so it is recommended
to keep it closed.
Rubber cover
1
RUNNER User's manual
on/off button
Charging
lights
-Dimensions
Capacity:

08
Open the rubber cover to the right in order to
access the internal compartment of the board.
Open the rubber cover to the right in order to
access the battery.
Press slightly forward until the ejection
mechanism is released.
Place the battery horizontally (with the PLEVO
logo facing up) and press until it locks the
mechanism and is anchored.
Extraction
2
2
3
1
RUNNER User's manual

09
Remove the battery horizontally backwards,
without exerting upward or lateral pressure.
3
Loading devices
To charge a mobile device with the battery of the suitcase it is necessary to connect a
USB type cable to one of the available ports (USB or USB 3.0). The battery can provide
power when installing in the suitcase or outside it.
To display the charge level, press the button and the lights will turn on automatically
indicating the battery status. The maximum load level is represented by 4 lights lit CYAN
color.
Charging lights
Power button
RUNNER User's manual

10
Backup battery
All PLEVO suitcases have a Nickel ion backup battery located inside the board that
complies with all established regulations. It is responsible for feeding the suitcase
system when the removable battery is not installed.
Important: The backup battery is charged automatically when the removable battery is
installed. The load percentage can be viewed by entering the PLEVO App and its
duration is 72 hours of continuous use approximately.
In case of simultaneous exhaustion of the charge of
the backup battery and the removable battery, the
suitcase can be opened with a key.
See the section "Opening with a key", p. 19
Backup battery
RUNNER User's manual

04 - Removable wheels
To install the wheels and remove them, it is necessary to access the four locks located in
the lower part of the suitcase.
Wheels locks
Installation
Follow steps 1 to 3 to remove the locks and install the wheels.
Slide and hold the safety lock back and place
the wheel bolt in the hole in the support
following the shape of the wheel.
Put pressure on the wheel until the bolt fully
enters the support orifice.
Bolt
Support orifice
11RUNNER User's manual

12
Release the lock to allow the final adjustment.
Thus, the wheel will be ready to use.
Disassembly
Follow steps 1 and 2 to remove the locks and disassemble the wheels.
Press and hold the lock back to release the
bolt.
Pull the wheel back while holding the safety
lock.
The wheel will be dismantled once the bolt
has come completely out of the hole.
Bolt
RUNNER User's manual

13
05 - Opening and closing the suitcase
General components of the closure
Side closure
Back closure
Opening command
Opening command
TSA Lock
Morse code button
Morse code
button
TSA Lock
Indicator light
Indicator
light
Closure lock
TSA Logo
TSA Logo
RUNNER User's manual

14
Electronic opening and closing by Face ID / Touch ID
With the PLEVO App, it is possible to open or close the suitcase using
biometric data. According to the mobile model used, facial recognition or
fingerprinting can be used.
Opening
Follow steps 1 to 3 to open the suitcase with biometric data.
Select the opening option with biometric data
within the App. Depending on the type of mobile
device used, the App will ask you to enter the
fingerprint or face for recognition.
If the entries by Face ID or by Touch ID are correct,
the light will turn on for a few seconds in CYAN
indicating the opening.
1
2
Indicator
Light
RUNNER User's manual

Turn the command to the left following the dotted
line to release the clasp handles.
3
Command
Handles
15
Closing
Follow steps 1 and 2 to close the suitcase.
Handles
Insert the handles into the closing
holes until the adjustment of the
locks occurs.
Select the "Close" function in the
Lock section of the App.
The suitcase will automatically close.
1 2
RUNNER User's manual

Electronic opening and closing by Morse Code
All PLEVO suitcases have an alternative closure system by Morse Code. Only one
configuration of the code is required for one time and will be ready to be used at any
time without relying on the mobile device.
Important: To perform an opening or closing with
this method, it is necessary to carry out a previous
configuration.
Go to the Password section of the App and set up
a four-digit numeric code. Allowed numbers: From
1 to 5. For example, 1234
16
Opening
Follow steps 1 and 2 after configuring the code to use this function.
Press the button repeatedly according to the digit
previously set. When doing so, the light will turn on
red indicating the entrance.
See example on next page.
1
Indicator
light
RUNNER User's manual

17
When entering the code correctly, the light will turn
on in CYAN color for 3 seconds and the closing
flaps will open automatically.
2
Command
Handles
CYAN light
On for 3 sec.
RED light
On for 3 sec.
Indicates that the suitcase was opened correctly
using the Morse Code.
Indicates that the Morse Code was entered
incorrectly.
x1 x2 x1 x3
Example: Code set 1-2-1-3
Pause Pause Pause
Press the button once while
the red light stays on.
Press the button once while
the red light stays on.
Press the button once while
the red light stays on.
Press the button once while
the red light stays on.
12 11 3
Important:
Between each number set it is necessary to pause until the red light goes out. Later you
can continue with the next number.
Red light Red light Red light Red light
RUNNER User's manual

18
Press the Lock button for 3 seconds, while
the red light comes on indicating the
entrance. A warning sound will indicate the
automatic closing of the lock.
2
Indicator
Light
Important: In case of making a new numerical configuration for the Morse Code and recording
problems when opening / closing the suitcase, it is advisable to disconnect and reconnect the
"Bluetooth" function of your Android or iOS mobile device.
Closing
Follow steps 1 and 2 to close the suitcase with the Morse system.
Insert the handles into the closing orifices until the
adjustment of the locks occurs.
1
Handles
RUNNER User's manual

Opening with a key
All PLEVO suitcases have a set of keys approved by the TSA to open and close
in an alternate way.
Locate the set of keys that accompanies the
PLEVO suitcase and enter one of them inside the
TSA lock.
Attention: Some PLEVO suitcases have a key for
the lateral lock and a different one for the rear
lock.
Turn the key to the right to release the lock. Thus,
the flaps will open automatically.
Remove the key after the operation.
1
2
19
Handles
To operate with this method it is necessary to follow the following steps:
RUNNER User's manual