plumBOSS eBOSS User manual

LIMITED 1 YEAR WARRANTY
We make every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials
and workmanship for the period of one year from the date of purchase(90 days if used by a
professional contractor or if used as rental equipment). This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or
alterations outside our facilities, normal wear and tear, or to lack of maintenance. We shall
in no event be liable for death, injuries to persons or property, or for incidental, contingent,
special or consequential damages arising from the use of our product. Some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above
limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE
WARRANTIES OF MERCHANTABILITYAND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with
transportation charges prepaid. Proof of purchase date and an explanation of the complaint
must accompany the merchandise. If our inspection verifies the defect, we will either
repair or replace the product at our election or we may elect to refund the purchase price if
we cannot readily and quickly provide you with a replacement. We will return repaired
products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning
the product.
The warranty gives you specific legal rights and you may also have other rights which
vary from place to place.
Instruction Manual
Manual Punch Driver eBOSS

SOXP%266$XVWUDOLD
3K



Due to continuing improvements, actual product may differ
slightly from the product described herein.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL
plumBOSS Australia Ph: 1300 331 141 | E: [email protected] | www.plumboss.com.au

SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the month and year of
purchase. Keep this manual and the receipt in a safe and dry place for
future reference.
IMPORTANT SAFETY INFORMATION
In this manual, on the labeling, and all other information provided with this product:
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow
this symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which,
if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol,
indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
PART LIST
NO. DESCRIPTION QTY NO. DESCRIPTION QTY
1 active handle grip 2 11 punch 1
2 plug 2 12 type H screw M8X25 1
3 active handle 1 13 connecting rod 1
4 pin 8x41 2 14 pin of connecting rod 1
5 type A circlip 8 4 15 body 1
6 guide sleeve 1 16 die 1
7 type A circlip 8 6 17 hex screw M8x8 2
8 gasket 2 18 fixed handle 1
9 spring 1 19 hook 1
10 pressure lever 1 20 screw 1
plumBOSS Australia Ph: 1300 331 141 | E: [email protected] | www.plumboss.com.au

MAINTENANCE AND SERVICING
Damaged equipment may cause serious personal injury. Do not use damaged
equipment. If abnormal noise or vibration occurs, have the problem corrected before
further using.
1. Before each using, inspect the general condition of the tool. Check for loose screws,
misalignment or binding of moving parts, cracked or broken parts, or any other
condition that may affect its safe operation.
2. After using, clean external surfaces of the tool with a clean, moist cloth; smear the
rust preventing oil on the metal surface of the tool and the dies to avoid rust. Store the
tool in the dry environment.
3. Service to the tool should only be done by a qualified Service Technician.
4. After a long time using, the sealing kits will be damaged..
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS
LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL
ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR
SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR
SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL
REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY
CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS
THERETO.
GENERAL SAFETY RULE
TO WORK IN SAFE CONDITIONS WITH THIS TOOLING, IT IS IMPERATIVE TO
READ CAREFULLY THE DIRECTIONS FOR USE AND TO FOLLOW THE
INSTRUCTIONS IT CONTAINS. IF YOU DO NOT RESPECT THE INFORMATION
WRITTEN IN THAT INSTRUCTION MANUAL THE WARRANTY WILL BE
VOIDED.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. This tool is not insulated; please do not use it near live conductor..
c. Keep children and bystander away while operating the Manual punch driver.
Distractions will cause you to lose control.
d. Please do not use or store this tool under high temperature, or one surrounding
filling with corrosive fluid. Pay attention to the sealing kits becoming aged.
2. Personal safety
e. Stay alert, watch what you are doing and use common sense when operating the
tool. Do not use the tool while you are tired or under the influence of drugs,
alcohol or medication.. A moment of inattention while operating tools may result
in serious personal injury.
f. Use safety equipment. Always wear eye protection. Safety equipment such as
dust mask, non-skid shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
g. Dress properly. Do not wear loose clothing or jewelry. Keep your hair，clothing
and gloves away from moving parts. Loose clothes jewelry or long hair can be
caught in moving parts.
plumBOSS Australia Ph: 1300 331 141 | E: [email protected] | www.plumboss.com.au

h. Do not force the tool. Use the correct power tool for your application .The
correct power tool will do the job better and safer at the rate for which it was
designed.
i. Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the Manual punch driver. This tool is dangerous in the hands of
untrained users.
j. Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the Manual Punch
Driver operation. If damaged, have the Manual Punch Driver repaired before use.
Many accidents are caused by poorly maintained power tools.
k. Use the Manual Punch Driver, accessories and tool bits etc., in accordance with
these instructions and in the manner intended for the particular type of tool,
taking into account the working conditions and the work to be performed. Use of
the Manual Punch Driver for operations different from those intended could
result in a hazardous situation..
3. Service
Have your Manual Punch Driver serviced by a qualified service technician using
only identical replacement parts. This will ensure that the safety of the Manual
Punch Driver Kit is maintained.
PLEASE SEE THE ILLUSTRATION BELOW:
plumBOSS Australia Ph: 1300 331 141 | E: [email protected] | www.plumboss.com.au

OPERATING INSTRUCTIONS.
Read the entire SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before using this product.
Use this tool for the manufacture’s intended purpose only. Use other than that which is
described in this manual can result injury or property damage.
HOW TO ASSEMBLE THE PUNCH AND HOLDER:
1. Select the appropriate punch die set. Ask an authorized facility or distributor to
choose proper punch and die set for hole punching.
Do not exceed the rated capacity of this tool, otherwise it will
caused a component failure, which could throw broken parts
with great force. Failure to observe this warning can
result injury or death.
2. Insert the punch into the upper shoulder; use the nut to lock it by hex spanner.
3. Insert the die into the lower shoulder, use a hex spanner to screw the nut to lock the
die.
4. Put up the active handle, place the plate between the punch and die
An improper setup could cause the components damage.
5. Press the active handle lever completely punching at a time, the scrap come out
6. after punching, keep the active handle locked by hook..
Do not punch on hard metal plate ot punch over the max
thickness.
Do not allow anyone to stand round of the tool. Ignore this warning can result in
injury or damage.
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the tool which carry important safety information.
If unreadable or missing, contact the agent to replace.
2. This product is not a toy, keep it out of reach of children.
3. Do not slide your fingers in the punch & dies profile.
4. Do not put your fingers in the head of the tool when you slide the dies inside it. Your
fingers could be pinched very severely.
5. Do not use the tool without punch & die.
6. Do not use this tool near live circuits.
7. The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
SAVE THIS INSTRUCTIONS
plumBOSS Australia Ph: 1300 331 141 | E: [email protected] | www.plumboss.com.au

UNDERSTAND YOUR TOOL
CC-100 are the tools for punching mild metal plate. It carries many advantages of good
design, easy operation, high power, high efficiency etc. They are the perfect tool to be used
in construction site.
1．Specification
Item eBOSS Stud punch
Max punching range: Ф34.1mm below 1.0mm mild steel plate
Stroke: 45mm
Dimension: 470x215x50mm
Weight: Approx3.60kg
Package: plastic box
Accessories:
Round Knockout Punches Type D: 22.2,34.1mm
The size of punch & die is marked on the surface of the down punch. If ask for special size
or special shape, please contact the distributor or manufacturer, they can custom made die
according to detail requirements.
2．Description of the components.
Code Name Function
1 Active handle Operating the handle to punching
2 Body Fix the handle and punch & holder set
3 Hex-screw Fix the holder
4 Die For punching
5 Punch For punching
6 Hook For locking the active handle
7 Fixed handle Guide to work
plumBOSS Australia Ph: 1300 331 141 | E: [email protected] | www.plumboss.com.au