Plura QC & Engineering 3G Series User manual

Re-imagine Beyond Technology [e-mail]
Operating Instructions
PBM-3G
"QC & ENGINEERING" 3G Series
PBM-307-3G
PBM-209-3G
PBM-317-3G
PBM-221-3G
PBM-224-3G
PBM-224-3G-10
PBM-332-3G
PBM-346-3G
PBM-347-3G
PBM-255-3G
PBM-224-3G

Re-imagine Beyond Technology [e-mail]
Table of Contents
PRECAUTION -----------------------------------------------------------------------------------------------------------5
1. OVERVIEW --------------------------------------------------------------------------------------------------------- 8
2. ADVANCED FEATURES ------------------------------------------------------------------------------------------ 8
3. FUNCTIONAL EXPLANATION OF EACH PART--------------------------------------------------------------- 9
1. FRONT PANEL ------------------------------------------------------------------------------------------------------ 9
PBM-307 & PBM-224-3G
------------------------------------------------------------------------------------- 9
Front Keys Arrangements ----------------------------------------------------------------------------------- 9
Front Keys Operations --------------------------------------------------------------------------------------- 9
Front Panel Operations ------------------------------------------------------------------------------------- 10
Speaker Out -------------------------------------------------------------------------------------------------- 10
2. REAR PANEL ------------------------------------------------------------------------------------------------------ 10
Connection Details ------------------------------------------------------------------------------------------- 10
DC Battery IN ------------------------------------------------------------------------------------------------- 10
RJ-45 – GPI, Control LAN (Ember+-OPTIONAL) -------------------------------------------------------- 11
Interface description ---------------------------------------------------------------------------------------- 11
4. MENU OVERVIEW------------------------------------------------------------------------------------------------ 12
1. TO SHOW AND REMOVE THE MENU ------------------------------------------------------------------------------- 12
2. TO GO TO THE NEXT LEVEL---------------------------------------------------------------------------------------- 12
3. TO GO BACK TO THE PREVIOUS LEVEL ---------------------------------------------------------------------------- 12
4. TYPICAL MENU OPERATION--------------------------------------------------------------------------------------- 12
5. BASIC OPERATION ---------------------------------------------------------------------------------------------- 12
1. TURNING ON THE MONITOR--------------------------------------------------------------------------------------- 12
2. VOLUME ADJUSTMENT -------------------------------------------------------------------------------------------- 13
6. ON SCREEN MENUS SELECTION AND ADJUSTMENT ----------------------------------------------------- 13
1. HOW TO ADJUST THE OSD SCREEN------------------------------------------------------------------------------- 13
7. SELECT VIDEO INPUT ------------------------------------------------------------------------------------------- 14
1. HOW TO SELECT VIDEO SOURCE BY OSD------------------------------------------------------------------------ 14
8. VIDEO MENU OPTIONS ----------------------------------------------------------------------------------------- 14
1. ADJUST ----------------------------------------------------------------------------------------------------------- 14
2. COLOR TEMPERATURE CONTROL --------------------------------------------------------------------------------- 14
Operating Instructions
PBM-3G SERIES
2

Re-imagine Beyond Technology [e-mail]
3. SCAN -------------------------------------------------------------------------------------------------------------- 15
5. ASPECT RATIO ---------------------------------------------------------------------------------------------------- 15
6. ZOOM ------------------------------------------------------------------------------------------------------------- 15
7. MONO/BLUE ONLY ----------------------------------------------------------------------------------------------- 16
8. PC MENU (PC MODE ONLY) --------------------------------------------------------------------------------------- 16
9. FLIP MODE -------------------------------------------------------------------------------------------------------- 16
10. NR (NOISE REDUCTION) ----------------------------------------------------------------------------------------- 16
11. DUAL LINK MODE (SDI ONLY) ----------------------------------------------------------------------------------- 17
9. AUDIO MENU OPTIONS ---------------------------------------------------------------------------------------- 17
1. SDI 1/ SDI 2 AUDIO GROUP -------------------------------------------------------------------------------------- 17
2. SDI 1/ SDI 2 AUDIO OUTPUT CHANNEL -------------------------------------------------------------------------- 17
3. LEVEL METER ----------------------------------------------------------------------------------------------------- 17
4. LEVEL METER TYPE ---------------------------------------------------------------------------------------------- 17
5. LEVEL METER POSITION ------------------------------------------------------------------------------------------ 17
6. LEVEL METER SCALE --------------------------------------------------------------------------------------------- 18
7. AUDIO MODE------------------------------------------------------------------------------------------------------ 18
8. VOLUME ----------------------------------------------------------------------------------------------------------- 18
10. MARKER MENU OPTIONS-------------------------------------------------------------------------------------- 19
11. MARKER & USER MARKER ------------------------------------------------------------------------------------------ 19
12. SAFETY AREA ------------------------------------------------------------------------------------------------------- 19
13. CENTER MAKER ----------------------------------------------------------------------------------------------------- 19
14. MARKER WIDTH ---------------------------------------------------------------------------------------------------- 19
15. MARKER COLOR ---------------------------------------------------------------------------------------------------- 19
16. PRESET1 & PRESET2 ------------------------------------------------------------------------------------------------ 20
17. GPI MENU OPTIONS -------------------------------------------------------------------------------------------- 20
1. GPI CONTROL & GPI#-------------------------------------------------------------------------------------------- 20
12. SETUP MENU OPTIONS ----------------------------------------------------------------------------------------- 21
13. FACTORY DEFAULT-------------------------------------------------------------------------------------------------- 21
14. FUNCTION 1 ~3 ------------------------------------------------------------------------------------------------------- 21
15. ON SCREEN DISPLAY------------------------------------------------------------------------------------------------ 22
OSD Option
--------------------------------------------------------------------------------------------------- 22
Time code ----------------------------------------------------------------------------------------------------- 22
Under Monitor Display (color: Tally R/G mode action) ------------------------------------------------- 22
SDI Signal State ---------------------------------------------------------------------------------------------- 22
16. ADVANCED ---------------------------------------------------------------------------------------------------------- 22
Operating Instructions
PBM-3G SERIES
3

Re-imagine Beyond Technology [e-mail]
Operating Instructions
PRM-3G SERIES
4
Information --------------------------------------------------------------------------------------------------- 23
Control -------------------------------------------------------------------------------------------------------- 23
Screen Control ----------------------------------------------------------------------------------------------- 23
Config LAN / Ember+(Optional) --------------------------------------------------------------------------- 23
Protocol Setting ---------------------------------------------------------------------------------------------- 23
Set ID ---------------------------------------------------------------------------------------------------------- 24
Fan Control --------------------------------------------------------------------------------------------------- 24
5. CAPTION FOR NORTH AMERICAN MARKET ----------------------------------------------------------------------- 24
6. OUTPUT RANGE--------------------------------------------------------------------------------------------------- 24
7. VIDEO RANGE----------------------------------------------------------------------------------------------------- 25
8. WAVEFORM ------------------------------------------------------------------------------------------------------- 25
13. PIP (PICTURE IN PICTURE) ------------------------------------------------------------------------------------ 26
14. PIP ON/OFF-------------------------------------------------------------------------------------------------------- 26
15. INPUT SOURCE ------------------------------------------------------------------------------------------------------ 26
16. ASPECT RATIO ------------------------------------------------------------------------------------------------------ 26
17. OSD TREE -------------------------------------------------------------------------------------------------------- 29
18. VIDEO --------------------------------------------------------------------------------------------------------------- 30
19. AUDIO --------------------------------------------------------------------------------------------------------------- 31
20. MARKER------------------------------------------------------------------------------------------------------------- 32
21. GPI------------------------------------------------------------------------------------------------------------------ 33
22. SETUP --------------------------------------------------------------------------------------------------------------- 34
23. PIP ------------------------------------------------------------------------------------------------------------------ 35
Operating Instructions
PBM-3G SERIES
4

Re-imagine Beyond Technology [e-mail]
•PRECAUTION
Before operating this unit, please read this manual carefully.
WARNING:
To reduce the risk of any electric shock, please do not remove the back cover. No user serviceable parts inside. Refer any service matters to
qualified service personnel. To prevent fire or shock hazard, do not expose the rear of the set to rain or moisture. Do not rub, clean or hit the
Active Matrix LCD with object that may scratch, mark, or damage the Active Matrix LCD permanently.
CAUTION:
Unauthorized tampering with the inside of the monitor invalidates the warranty.
The manufacturer shall not warrant for any damage caused by improper maintenance and/or repair or work by third parties.
Important safeguards for you and your new product:
Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential electrical shock or
fire hazards. Please read and observe the following safety points when installing and using your new product and save them for future
reference.
1. Read Instructions
2. Follow Instructions
All operating and use instructions should be followed.
3. Retain Instructions
The safety and operating instructions should be retained for future reference.
4. Notice Warnings
All warnings on the product and in the operating instructions should be adhered to.
5. Cleaning
Disconnect the unit from the mains before cleaning the unit. Do not use abrasive cleaners. Use a damp
cloth ONLY for cleaning.
6. Water and Moisture
Operating Instructions
PBM-3G SERIES
5

Re-imagine Beyond Technology [e-mail]
Do not use this product near water surface.
7. Transporting Product
This product should be moved with care. Quick stops, excessive force and uneven surfaces may cause the
product damages.
8. Accessories
Do not use accessories not recommended by PLURA Inc. as they may cause hazards.
9. Ventilation
Do not block any of the ventilation openings.
Install in accordance with the manufacturer’s instructions.
10. Power Sources
This product should be operated only from the type of power source indicated on the marking label. If you
are not sure of the type of power supply, consult your power supply company.
11. Power Lead Polarization
This product is equipped with a three-wire grounding-type cord. This is a safety feature. Do not use any
other type power cord.
12. Power Cord Protection
Power-supply cords should be dressed so that they are not likely to be pulled or pinched by items placed
upon or against them.
13. Lightning
For added protection for this product during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet. This will prevent possible damage to the product
due to lightning and power-line surges.
14. Grounding the product
This product must be grounded properly to comply with the safety regulations in the country of use. If you
are unsure of these regulations, please consult a qualified electrician.
15. Servicing
Do not attempt to service this product by yourself as opening or removing covers may expose you to
dangerous voltages or other hazards. Refer all servicing to qualified service personnel.
16. Damage Service Required
Isolate this product from the mains and refer to qualified service personnel under the following conditions:
A. If the power-supply cord or plug is damaged.
B. If the front LCD front has been damaged.
C. If the product does not operate correctly by following the operating instructions. Use only the user
control buttons any improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to its normal operation.
D. If the product has been dropped.
Operating Instructions
PBM-3G SERIES
6

Re-imagine Beyond Technology [e-mail]
E. If the product exhibits a distinct change in performance.
17. Safety Check
Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition and the warranty seal is provided.
18. Mounting
The product should be mounted on a wall as recommended in the instructions.
19. Power
This set operates on an AC supply; the voltage is as indicated on the label on the Manual. This appliance
must be earthed at all times through the chassis as well as through the power lead.
Operating Instructions
PBM-3G SERIES
7

Re-imagine Beyond Technology [e-mail]
1. OVERVIEW
The new PBM-3G Plura Precision Broadcast LCD Series which is built with Grade A LCD Panel
that supports 3Gb/s–1080/60P input, Powerful Dual 3Gb/s input display with advanced
Waveform / Vector scope, Closed Caption or Teletext 801 & subtitle for North American or
Australian markets respectively, VPID, IMD and many more . . .
2. Advanced FEATURES
• 3Gb/s-1080/60p
• 2 x Auto-detect HD-SDI, SDI with active loops (3 Gb/s / 1.485Gb/s / 270Mb/s)
• Dual HD SDI YPbPr 4:2:2 – Dual HD SDI YPbPr/RGB 4:4:4 & 2K
• RGB, YUV, Y/C, Composite, UXGA, DVI & HDMI (DHCP)
• Complies with EBU-3320 TECH, SMPTE-C and ITU-R BT.709 Standards
• (ICAC) - Plura Intelligent Connection for Alignment & Calibration
• Closed Caption (608/708) – North American Market
• Teletext 801 & Subtitle OP-47 – Australia & NZ Market
• Cutting edge De-interlacing and Scaling Technology
• Fast Response Time for high motion video
• RGB 10 Bit Digital Signal Processing
• 178° Viewing Angle Display
• Internal Monitor Display (IMD)
• Underscan / Overscan / Normal / Zoom
• Pixel to Pixel Mode, Tally, DC Operation
• Display LTC & DVITC time code with line select
• Internal Pattern Generator and Wall Control System
• Built In Stereo Speaker, 16 CH Audio Metering Display
• Analog & Embedded Audio Input, Digital Audio Decoding
• Color Temperature – User, VAR, Adjustable (11000K TO 3200K)
• Various and User defined Markers Display, Safe Area in HD & SD
• Picture and Picture (PaP), Picture in Picture (PIP) display / Blend
• Intuitive OSD Display, Graphic based, 6 Languages (UNICODE System)
• Display Advanced Waveform & Vector Scope simultaneously with line select
• Programmable 3 User Front Pushbutton Controls, GPI & RS232 Remote Control
• OPTIONS: Ember+ Control, Battery Mount: PBM-AB (Anton Bauer), PBM-VM (V-
Mount), Hard Carry Case, Rack mount & Soft Carry case
Operating Instructions
PBM-3G SERIES
8

Re-imagine Beyond Technology [e-mail]
3. Functional explanation of each part
1. Front Panel
PBM-307 & PBM-224-3G
Front Keys Arrangements
Front Keys Operations
Key Name Operati
Stand By
er
on
aPower on/off Button. This button is op ted after being pressed about 3 seconds.
SEL/INPUT
Activates OSD menu of input source selecting. Changes input source.
Executes functions (by OSD help commands) in main OSD menu.
Down
Decreases Audio volume of speaker.
Decreases values of user menu in main OSD menu.
Executes function (by OSD help commands) in main OSD menu.
UP
Increases Audio volume of speaker.
Increases values of user menu in main OSD menu.
Executes function (by OSD help commands) in main OSD menu.
Menu
Activates main OSD menu.
Navigates higher menu in main OSD menu. Stops auto frequency searching.
Exits OSD menu.
Audio
Activates Audio Lever Meter
WF/Vector
Activates Waveform & Vector Scope (SDI only) SETUP Menu Waveform format
Blue Only
s
M
e
o
le
n
c
o
t ic o
o
n
lor / Blue ONLY selection
H/V-DeLay
Activates ‘H & V’ blanking display ‘H DeLay’ -> ‘V DeLay -> ‘HV DeLay’ -> off
Operating Instructions
PBM-3G SERIES
9

Re-imagine Beyond Technology [e-mail]
Operating Instructions
PRM-3G SERIES
11
Function 1
Executes functions as programmed
Function 2
Executes functions as programmed
Function 3
Executes functions as programmed
Marker
Draw Marker on Screen (off -> 16:9 -> 4:3 … -> 2.35:1)
Scan
executes Scan function (over-Scan -> Zero-Scan -> under Scan-> Pixel to Pixel)
SDI1
Select SDI 1 source
SDI 2
Select SDI 2 source
Analog
Select analog source directly
(‘composite1’ ->‘composite2’ ->‘composite3’ -> ‘S-video’ -> ’G.B.R’ -> ‘Y.Pb.Pr’ -
> ’Pc’ -> ‘HDMI’ -> ‘DVI’
Adjust
Adjust Video Menu (Brightness -> contrast -> color -> Sharpness->Phase & tint)
turn right = ‘UP’ button turn left = ‘Down’ button
Front Panel Operations
GREEN Led is ON when any LED button is selected or Power is ON
RED led is ON when monitor is in stand-by mode
Speaker Out
Speaker R out
8 ohm±15%, Max 2W + 2W
Speaker L o ut
2. Rear Panel
Connection Details
DC Battery IN
PIN No. d escription
1 G n D
2, 3
4 + 12V/24V
PBM-317 -»12V, PBM-224 -»24V - PBM-224 -»12V (S/N starts with 17APL)
Operating Instructions
PBM-3G SERIES
10

Re-imagine Beyond Technology [e-mail]
RJ-45 – GPI, Control LAN (Ember+-OPTIONAL)
Remote PIN Assignment
8 P in Common (GND) 4
P in
GPI 4 Port
7 P in
GPI 7 Port
(StanD
3
P in
GPI 3 Port
6 P in
GPI 6 Port 2
P in
GPI 2 Port
5 P in PI 5 PoG rt 1 P in GPI 1 Port
Interface description
Interface d
e
SDI 1 IN
SDI 2 IN
HD SDI / SD SDI input
SDI 1 OUT
SDI 2 OUT
SDI 1, SDI 2 Loop out
RS-232 IN
update/Multi control/auto color calibration
RS-232 OUT
Multi control out
HDMI
High Definition Multimedia input
DVI-I
DVI- eI type Digital / analog Pc-RGB Vid o input
CVBS1/Pr/G IN
CVBS2/Y/R IN
CVBS3/Pb/B IN
High Definition Multimedia input compatible
GBr (SoG sync) input
Y, Pb, Pr component Video input
CVBS / composite input
CVBS1/Pr/G OUT
CVBS2/Y/R OUT
CVBS3/Pb/B
OUT
Component/GBR/composite1,2,3/ S-Video Loop out
Contact Point Switch
GPI CONTROL LAN CONTROL Ember+ RJ 45 Jack Face
Optional
Control Terminal: 1 ~ 7 Pin
GND Terminal: 8 Pin of RJ-45
Operating Instructions
PBM-3G SERIES
11

Re-imagine Beyond Technology [e-mail]
Audio R IN
Audio L IN
DVI-I/component/GBR/composite1,2,3/S-Video Audio input
Audio R OUT
Audio L OUT
Audio Monitor out
AC IN
AC 90V ~ 240V, 50Hz/60Hz
DC IN
PBM-317: DC 11V ~ 17V , PBM-224: DC 24V, PBM-224: DC 12V (S/N starts with
17APL)
UPDATE/Ethern
et
Firmware Upgrade / Ember+ Optional
GPI
GPI 1 ~ 7 control Port
4. MENU OVERVIEW
In this system menu, there are several ways to maneuver the menu settings.
Most menus consist of three levels to select the necessary option, but some settings require
greater depth. If you press the MENU button, the first and second level of the menu system will
appear on the monitor screen. The third level can be displayed by pressing SEL/INPUT. If a
menu has more than three levels, the pop-up dialogue box will be displayed as the fourth or
fifth level.
1. To show and remove the Menu
Press the MENU button to display the menu. Press the MENU button again to hide the menu.
2. To go to the next level
Press SEL/INPUT button.
3. To go back to the previous level
Press MENU button
4. Typical Menu Operation
1. Press MENU button: The main menu will appear.
2. Use UP/DOWN button to select the desired menu option (icon).
3. While the desired menu option is selected, press SEL/INPUT to move to the second level.
4. Use UP/DOWN button to select the second menu option.
5. Press SEL/INPUT to move to the third level: Some menu options require additional steps.
6. Press MENU to return to the previous menu to return to monitor viewing.
5. BASIC OPERATION
1. Turning On the Monitor
Operating Instructions
PBM-3G SERIES
12

Re-imagine Beyond Technology [e-mail]
1. Firstly, make sure you have connected the AC power cord or DC XLR connector. The monitor will
switch to standby or power on mode. If the monitor is in standby mode, press the ST-BY button to
turn on the monitor.
2. Select the source by using SEL/INPUT button on Keypad in front of monitor
2. Volume Adjustment
1. Press the ADJUST button on Keypad.
2. Press the MENU button on Keypad.
- OSD Audio menu -> Volume menu.
6. On Screen Menus Selection and Adjustment
1. How to adjust the OSD screen
1. Press the MENU button and then UP/DOWN button to select each menu.
2. Press the SEL/INPUT button and then use UP/DOWN (SEL/INPUT)/MENU button to display the
available menu.
• The monitor's OSD (On Screen Display) may differ slightly from what is shown in this manual.
Operating Instructions
PBM-3G SERIES
13

Re-imagine Beyond Technology [e-mail]
7. SELECT VIDEO INPUT
1. How to Select Video Source by OSD
1. Press the SET/INPUT button and then UP/DOWN button to select the required video source.
2. Press the SET/INPUT button to go to select the desired video source.
3. If Input Name is enabled, The SET/INPUT button button will show the input name previously
programmed instead of the source name.
8. VIDEO MENU OPTIONS
1. Adjust
- Adjust the values of Brightness, Contrast, Color, Tint
and Sharpness directly from -50 to 50
2. Color Temperature Control
- For Setting the Color temperature or adjusting RGB
gain value
- User (User setting RGB gain value), VAR(3200K ~
9300K), Often used value( 9300K, 6500K,
5400K,3200K)
- Color Space: Native/BT.709
Operating Instructions
PBM-3G SERIES
14

Re-imagine Beyond Technology [e-mail]
3. Scan
- Select desired scan mode.
1. Over Scan – 95% input size and fit the selected
display size
2. Zero Scan – 100% input size and fit the selected
display size
3. Under Scan – 105% input size and fit the selected
display size
4. Pixel to Pixel – Video input will match the video
display resolution (NO Scaling).
5. Aspect Ratio
- For setting the aspect ratio.
- Full Screen: The video input will be scaled to the max panel resolution.
- Full Screen, 16:9, 4:3, 14:9, 13:9, 1.85:1: The video will be displayed based on the selected aspect ratio.
- Function key can be assigned to the aspect ratio and will be rotating through this sequence, Pixel to
Pixel, Full Screen, 16:9, 4:3, 14:9, 13:9, 1.85:1, 2.35:1
6. Zoom
- Can see the enlarged video by (2X, 3X, 4X, 5X) ratios.
- If user select the Zoom 2X, can see the below yellow box
in picture.
- Press Select or enter button, user can see the enlarged
picture.
- Menu key or exit key escape the zoom mode.
- Example (3X3)
Zoom X position: c oor dinate of video image’s column position. Zoom y position: c oor dinate
of video image’s row position.
Operating Instructions
PBM-3G SERIES
15

Re-imagine Beyond Technology [e-mail]
7. Mono/Blue Only
- Mono color: For selecting monochrome images.
- Blue Only: Blue Video channel is enabled
8. PC Menu (pc mode only)
- Only operate in PC input mode
- Select auto-adjust and adjust Phase, HV position, frequency
- Auto-adjust automatically set the optimum values of Phase, HV position and frequency.
9. Flip mode
< H-flip off > < H-flip on >
- H-Flip Display on/off
10. NR (Noise Reduction)
- noise reduction on/off. (SDI mode only)
Operating Instructions
PBM-3G SERIES
16

Re-imagine Beyond Technology [e-mail]
Operating Instructions
PRM-3G SERIES
18
11. Dual Link Mode (SDI Only)
-Dual Link Mode select. (Auto / Off / RGB444 / YCbCr 444/ YCbCr 422)
- If SDI signal has a video payload identification and Dual Link Mode set auto mode. Dual link is set
automatically.
9. AUDIO MENU OPTIONS
1. SDI 1/ SDI 2 Audio Group
-Select primary or secondary Audio group to extract.
(Group 1~4)
2. SDI 1/ SDI 2 Audio Output Channel
-Audio output channel source select.
(channel1~4, channel1/2, channel3/4, off)
3. Level Meter
- Display the Audio level meter on screen in SDI input.
- Audio level meter cannot be displayed with OSD.
- SDI input can support 16 CH embedded Audio, other inputs can only support 2 CH Audio
4. Level Meter Type
-Pair: respectively channel with right and left display
-Group: respectively group display
5. Level Meter Position
- Level Meter Position selects. (TOP/Middle/Bottom)
Operating Instructions
PBM-3G SERIES
17

Re-imagine Beyond Technology [e-mail]
6. Level Meter Scale
- Level Meter Scale mode selects. (BBC / EBU / VU / NORDIC /
DIGITAL / DIN / EXPAND DIN)
7. Audio Mode
- Sound mode selects (Stereo/Dual Mono)
8. Volume
- Adjust the speaker or headphone Volume level. (0~32)
Operating Instructions
PBM-3G SERIES
18

Re-imagine Beyond Technology [e-mail]
10. Marker MENU OPTIONS
1. Marker & User Marker
- Marker: 16:9, 4:3, 14:9, 13:9, 1.85:1, 2.35:1,
1.85:1&4:3, User1, User2, User3
(Customized markers).
- User Marker: The user defined Marker
size setting.
2. Safety Area
-Safety Area: Draw dotted line Marker on screen.
(16:9 95/93/90/88/80%,
4:3 95/93/90/88/80%,
EBU Action 16:9/14:9/4:3,
EBU Graphic 16:9/14:9/4:3)
3. Center Maker
- “+” Marker on center of screen
4. Marker Width
-Marker line thickness setting. (0~10)
5. Marker Color
- Marker Line Color: Select Marker line color
(White, Yellow, Blue, RED, Black)
- Safety Line Color: Select Safety line color
(White, Yellow, Blue, RED, Black)
- Marker Back Color: Select Marker Back Color.
(None, Gray, White, Blue, Black)
- Safety Back Color: Select Safety Back Color.
(None, Gray, White, Blue, Black)
- Marker BK Blend Color: Select Marker blending level. (0 ~ 5)
- Safety BK Blend Color: Select Safety blending level. (0 ~ 5)
Operating Instructions
PBM-3G SERIES
19

Re-imagine Beyond Technology [e-mail]
6. Preset1 & Preset2
- Markers can be set as preset 1 & 2 and be triggered by GPI controller.
- GPI preset markers can only be utilized by GPI controller
11. GPI MENU OPTIONS
1. GPI Control & GPI#
- For programming selected functions to particular GPI ports.
- GPI Controller can be utilized to remotely control the monitor.
- GPI Control: GPI function Enable/Disable
- GPI 1 ~ 7
GPI Function Description
Undefined Not set (no function allocated)
Marker1 On/Off, Marker2 On/Off Displays the markers which have been set
by the GPI PRESET1, 2 items.
Center Marker Displays the center marker.
Aspect Area For setting the aspect ratio.
Safety Area Displays the Safety Area.
Tally R, Tally G For displaying the Red, Green or Amber
( if you select R & G at the same time)
tally LED.
Input SDI1, SDI2, SFP, HDMI Switches the input source.
Menu Key, Enter Key, Up Key, Down Key
Left Key, Right Key
Use the key function by GPI.
Function key1 ~ 6 Function key1 ~ 6
H/V delay H delay, V delay, HV delay, Off
Aspect Full Screen, 16:9, 4:3, 14:9, 13:9, 1.85:1,
2.35:1
GPI 7 : Power Key(Fixed)
Operating Instructions
PBM-3G SERIES
20