PNI SafeHome PT720MW User manual

PNI SafeHome PT720MW
Smart video door phone / Interfon video inteligent
EN User manual ............................................. 3
RO Manual de utilizare ................................... 17

User manual 2
English
Tuya Smart APP
Download the application Tuya Smart by accessing Google Play or the App Store
or scan the QR codes below:
Android iOS
Add device in Tuya Smart application
1. Open the application, create an account and log in.
2. Add your device by pressing the +icon in the upper right corner of the screen
or by pressing the Add device (this button appears when you do not have any
devices added to the application).
3. Select the option Video surveillance on the left side of the screen.
4. From the list of devices on the right side of the screen, select Smart Doorbell
5. In the next interface, select the option Ap Mode from the upper right corner.
6. Then tick Make sure the indicator is flashing quickly or a prompt tone is heard.
Click Next.
7. Select the WiFi network you want to connect to and add the password.
8. Enter the door phone settings menu in System - Network settings - WiFi
settings and select AP Mode. The door phone will close and restart.
Note: to access the door phone settings menu, press the wheel on the upper right side of

3User manual
English
the door phone . Move the wheel up and down to navigate the menu.
9. Enter the WiFi settings of the phone and connect to the network SmartLife-
Doorbell.
10. Return to the application. The app will start scanning the devices.
11. Once your device was identified, you will receive the confirmation Added
Successfully.
12. To finish, click the Done button.
13.

User manual 4
English
Device control from the application
Options:
1. Image capture: takes an image and saves it in the phone’s memory
2. Intercom: press to talk to the person in front of the door
3. Recording: press to record video. The recording will be saved in the phone
memory.
4. Unlock the lock 1
5. Channel change
6. Unlock the lock 2
7. View files saved on the SD card inserted in the door phone
8. View photos and videos saved in the phone memory

5User manual
English
Indoor unit description
9. Power LED 15. Loudspeaker
10. Led door 1 16. Settings menu button
11. Led door 2 17. Micro SD card slot
12. TFT screen 18. Volume +
13. Touch buttons 19. Volume -
14. Microphone

User manual 6
English
Symbols description
Access the
menu
Confirmation
Up / Down
In the standby mode, press this button to enter the
settings menu.
Once you access the menu, push this button up or
down to navigate the menu.
Press this button to enter a specific menu item and
confirm a setting.
In Intercom mode, press this button to stop / restart
recording. If you are in capture mode, press this
button to capture an image.
While playing audio, video or photo files, press this
button to Stop or Play.
In playback mode, long press this button to adjust the
volume. The volume bar will appear on the screen.
Volume + /
Volume -
Turn this knob up and down to adjust the volume of
the indoor unit.
Call transfer
Internal call
Image settings
Refresh
In the standby mode, press and hold to make an
internal call.
During an external call, press to transfer the call.
In Intercom mode, press to make the following
settings: brightness, contrast, saturation, volume
(adjust the sound from the external unit).
Refresh: when connecting to the indoor unit PAL
/ NTSC CCTV cameras or the included outdoor
camera and a CVBS / AHD CCTV camera or only
the included outdoor camera and no image appears
on the monitor, press the “R” symbol on the screen.
Monitor Select the video source.
talk Click to talk to the visitor
Unlock Click to allow visitor access, unlocking the lock.
Hang up
Back
Exit
Click to end the conversation with the visitor.
Back to the previous page (when you are in the
settings menu).
Exit the settings menu, return to standby mode.

7User manual
English
Connection diagram 1
Power adapter AC/DC
for camera not included
Power adapter AC/DC
for camera not included
)External power source
(AC100V-240V)--optional
)
Power adapter AC/DC
(not included)
Power adapter
Lock (not included)
(not included)
AC/DC
included)
Lock(not
DOOR1 DOOR2

User manual 8
English
Outdoor unit connection diagram
Note:
The system supports the connection of a Normal Open (NO) electromagnetic lock. This
means that in standby mode, the relay is open and the lock is closed. When the Unlock
button on the internal unit is pressed, the relay closes and the lock opens.
You must connect electromagnetic lock according to outdoor connection diagram, and
power the lock with dedicated AC/DC adapter ( not included).
Power the indoor unit with the power adapter included in the package.
Connection diagram 2
4C4C 4C
4C
4C
4C
4C
CAM1
Alarm
Alarm
CAM2

9User manual
English
Cable connections recommendations
For connections, use the below cable types:
1. Standard insulated and uninsulated type cable 4C.
Distance ≤28 m (4x0.2mm2)
Distance ≤50 m (4x0.3mm2)
Distance ≤80 m (4x0.5mm2)
2. Standard uninsulated cable type 3C + video cable (75-3)
Distance ≤100 m
3. Uninsulated CAT5 network cable (not recommended)
Distance ≤50 m
Video door phone usage
1. The visitor presses the call key on the outdoor unit of the door phone.
2. The ringtone will be heard on both the indoor and outdoor units. The default
maximum call duration is 30 seconds.
3. Immediately, the visitor’s image appears on the indoor unit screen (image taken
by the camera on the outdoor unit).
4. To talk to the visitor, press the key Talk . The ringtone is interrupted. The
maximum talk time is 120 seconds.

User manual 10
English
Note: If no one answers the call, the visitor will hear the message Please leave a message
and will have a maximum of 60 seconds to leave a message.
5. If you want to allow the visitor access, press the key Unlock . The lock will
unlock.
6. Press the key Hang up to end the conversation.
Note: After pressing Hang up key, both the voice and the image of the visitor will
be heard for another 20 seconds. This feature allows the host to ensure that the visitor
has entered on site.
If you have inserted a micro SD card into the indoor unit, the whole process will be
recorded on the card or images will be captured (depending on the settings made).
Access the menu Mode - Record mode and select Video or Snapshot.
Notes:
During a conversation, you will not be able to press the button Monitor to change
the video source.
During a conversation, if a call comes in from another connected camera, the indoor unit
will emit a “du ... du ... du ...” warning sound.
Video source
Press the key Monitor to change the video source:
DOOR1 - will display the image taken by the camera connected to the input
DOOR1
CAM1 - will display the image taken by the camera connected to the input CAM1
DOOR2 - will display the image taken by the camera connected to the input
DOOR2
CAM2 - will display the image taken by the camera connected to the input
CAM2
STANDBY - the date and time will be displayed on the screen for a few seconds,
after which the monitor will turn o.
Note: If you have connected only one camera, you can deactivate the other outputs in
the setup menu.