PNI SafeHome PT Remote One User manual

1User manual
Pairing the PNI SafeHome PT Remote One touch remote
control with the PNI SafeHome PT101 smart switch
To pair these two devices, hold down the button on the PNI SafeHome
PT101 smart switch for about 3 seconds until it emits a beep. As soon as
the beep is heard, press the PNI PT Remote once. Now the two devices
are paired.
To disconnect them, hold down the button on the PNI SafeHome PT101
smart switch for approximately 6 seconds until it emits two beeps. After
hearing the 2 beeps, the PNI PT Remote will unpair.
If after the 2 sequences we keep pressing the PNI SafeHome PT101
smart switch, it will reset.
In the event of a power failure or power interruption to the PNI
SafeHome PT101 smart switch, when the power returns, the PNI PT
Remote remains paired.
Also, if we change the battery in the PNI PT Remote, it remains paired
with the smart switch.

Manual de utilizare2
Imperechere Telecomanda cu touch simplu PNI SafeHome
PT Remote One cu Intrerupatorul inteligent PNI
SafeHome PT101
Pentru imperechere, se tine apasat aproximativ 3 secunde butonul pe
intrerupatorul inteligent PNI SafeHome PT101 pana emite un beep.
Imediat cum este auzit beep-ul, se apasa pe telecomanda PNI PT Remote
o singura data. Acum, cele doua dispozitive sunt imperecheate.
Pentru desperechere, se tine apasat aproximativ 6 secunde butonul pe
intrerupatorul inteligent PNI SafeHome PT101 pana emite doua beep-
uri. Dupa auzirea celor 2 beep-uri, telecomanda PNI PT Remote se va
desperechea.
Daca dupa cele 2 secvente continuam sa tinem apasat pe intrerupatorul
inteligent PNI SafeHome PT101, acesta se va reseta.
In cazul unei pene de curent sau intreruperea alimentarii la intrerupatorul
inteligent PNI SafeHome PT101, la revenirea curentului, telecomanda
PNI PT Remote ramane imperecheata.
De asemenea, in cazul in care schimbam bateria la telecomanda PNI PT
Remote, aceasta ramane imperecheata cu intrerupatorul inteligent.