PNI SafeHome PT255 User manual
PNI SafeHome PT255
EN User manual ......................................................... 2
BG Ръководство за употреба ............................. 14
DE Benutzerhandbuch .............................................. 27
ES Manual de usuario ............................................... 40
FR Manuel utilisateur ............................................... 52
HU Használati utasítás .............................................. 64
IT Manuale utente .................................................. 76
NL Handleiding ........................................................ 88
PL Instrukcja obsługi ............................................... 100
RO Manual de utilizare ............................................. 112
3 - User manual
PNI SafeHome PT255
Smart temperature and
humidity sensor
User manual
3 - User manual 4 - User manual
Technical specifications
• Power supply: 5VDC 2A (USB) or 2 x LR03
3VDC batteries
• Standby current: ≤75uA
• Alarm current: ≤60mA
• Low voltage level: ≤2.2V
• WiFi frequency: 2.4GHz
• Transmission power: 100mW
• Detected temperature range: -10°C ~ + 55°C
• Detected humidity range: 0-99% RH
• Alarm sound intensity: 55dB
• Operating emperature: -26°C ~+80°C
Warning: Do not use the sensor for a long time in
environments with humidity exceeding 90%.
3 - User manual 4 - User manual 5 - User manual
Product description
B
A
C
D
A - WIFI signal
B - Battery level
C - Temperature
D - Humidity
E - Air inlet
F - Micro USB port
G - Reset button
E
G F
4 - User manual 5 - User manual 6 - User manual
Battery installation
Turn counterclockwise the bracket on the back of
the sensor and install the two batteries correctly:
1.5V
1.5V
5 - User manual 6 - User manual 7 - User manual
Control from the Tuya Smart
application
1. Download and install the Tuya Smart application
on your smartphone. Search for the app in the
Google Play/App Store or scan the QR code
below:
Android iOS
2. After installation, open the application, create
6 - User manual 7 - User manual
an account and log in.
3. Enable WiFi (2.4GHz) and GPS Location on
your mobile phone.
4. To add the sensor to the application, tap on the
“+” icon in the upper right corner.
5. Select Sensors - Temperature and Humidity
Sensor (WiFi) from the left menu.
6. Select the WiFi network you want to connect
to and add the network password.
7. Power on the sensor. Press the Reset key for
about 10 seconds until the WiFi symbol on the
sensor screen flashes frequently.
8. Tap Next, then and select Blink quickly.
9. Wait for the application to identify your sensor.
10. After identifying the sensor, press the “+” icon
next to the sensor and, after a few seconds, press
8 - User manual 9 - User manual
the Done button to finish the pairing procedure.
11. After pairing, the WiFi symbol remains
constantly lit on the screen.
8 - User manual 9 - User manual 10 - User manual
Application options:
• Set the temperature and humidity alarm level.
• Change temperature measurement unit
9 - User manual 10 - User manual 11 - User manual
(Celsius or Fahrenheit).
• View battery level.
• Turn o the audible alarm.
• View alarm report and other more.
Notes:
• Frequent WiFi reconnection may increase the
internal temperature of the sensor.
• If the temperature and humidity change
frequently, the application will update the
temperature and humidity once every 30
seconds.
10 - User manual 11 - User manual 12 - User manual
Simplified EU Declaration of Conformity
SC ONLINESHOP SRL declares that PNI
SafeHome PT255 Smart Temperature and
Humidity Sensor is in accordance with RED
Directive 2014/53/EU. The full text of the EU
Declaration of Conformity is available at the
following internet address:
https://www.mypni.eu/products/8601/download/
certifications
CERTIFICATE OF QUALITY AND
COMMERCIAL WARRANTY
The products identified in this certificate on
the basis of the trade name and the unique
serial number S/N, benefit from a commercial
guarantee as follows: The warranty period for
11 - User manual 12 - User manual 13 - User manual
individuals is 24 months from the date of delivery
for manufacturing and material defects.
The warranty period for legal entities is 12 months
from the date of delivery for manufacturing and
material defects.
The warranty period is calculated from the date of
invoicing of each product.
The average duration of use of the product is
48 months, provided that the installation and
operating instructions that accompany the
product are followed.
The commercial guarantee does not aect the
consumer’s rights provided by the applicable
legislation in force, respectively the Emergency
Ordinance 140/28.12.2021 on certain aspects
regarding the contracts of sale of goods, OG
12 - User manual 13 - User manual
21/1992 on consumer protection with subsequent
amendments and completions and Law 296/2004
on the Consumer Code as subsequently amended
and supplemented.
Download the warranty certificate:
15 - Ръководство за употреба
PNI SafeHome PT255
Интелигентен сензор за
температура и влажност
Ръководство за употреба
15 - Ръководство за употреба 16 - Ръководство за употреба
Технически спецификации
• Захранване: 5VDC 2A (USB) или 2 x LR03
3VDC батерии
• Ток в режим на готовност: ≤75uA
• Алармен ток: ≤60mA
• Ниско ниво на напрежение: ≤2.2V
• WiFi честота: 2.4GHz
• Емисионна мощност: 100mW
• Установен температурен диапазон: -10°C
~ +55°C
• Установен диапазон на влажност: 0-99%
RH
• Интензитет на звука на алармата: 55dB
• Работна температура: -26°C ~+80°C
15 - Ръководство за употреба 16 - Ръководство за употреба 17 - Ръководство за употреба
Предупреждения: Не използвайте сензора
за дълго време в среда с влажност над 90%.
Описание на продукта
B
A
C
D
A - WIFI сигнал
B - Ниво на
батерията
C - Температура
D - Влажност
E - Вход за въздух
F - Micro USB порт
G - Бутон за
нулиране
16 - Ръководство за употреба 17 - Ръководство за употреба 18 - Ръководство за употреба
E
G F
Монтаж на батерии
Завъртете обратно на часовниковата стрелка
скобата на гърба на сензора и поставете
двете батерии правилно:
17 - Ръководство за употреба 18 - Ръководство за употреба 19 - Ръководство за употреба
1.5V
1.5V
Управление от приложението Tuya
Smart
1. Изтеглете и инсталирайте приложението
Tuya Smart на вашия смартфон. Потърсете
18 - Ръководство за употреба 19 - Ръководство за употреба
приложението в Google Play/App Store или
сканирайте QR кода по-долу:
Android iOS
2.След инсталиране отворете приложението,
създайте акаунт и влезте.
3.Активирайте WiFi (2.4GHz) и GPS
местоположение на мобилния си телефон.
4. За да добавите сензора към приложението,
щракнете върху иконата “+” в горния десен
20 - Ръководство за употреба 21 - Ръководство за употреба
ъгъл.
5. Изберете Sensors - Temperature and
Humidity Sensor (WiFi) от лявото меню
6. Изберете WiFi мрежата, към която искате
да се свържете, и добавете паролата за
мрежата.
7. Включете сензора. Натиснете бутона за
нулиране за 10 секунди, докато символът
WiFi на екрана на сензора мига често.
8. Докоснете Next в приложението и
изберетеBlink quickly.
9. Изчакайте приложението да
идентифицира сензора.
10. След като идентифицирате вашия
сензор, натиснете иконата + до сензора
и след няколко секунди натиснете Done
Table of contents
Languages:
