Polanik P-647 User manual

TECHNICAL SPECIFICATION
INSTRUCTION MANUAL
Waterproof cover for landing area
P 647
File: 2014-07-17
Technical Support
Paweł Ciechanowski
p.ciechano[email protected]

Instruction anual/technical specification P-647 2/4
Thank you for purchasing POLANIK waterproof cover type P 647.
Safe assembly and use
•Before you start to asse ble and use the product please read this anual carefully and store the anual in a safe
place for further reference. Polanik Sp. z o. o. shall not be liable for any cage da ages which are the result of the
failure to follow this anual.
•Unauthorized copying of this anual, in whole or in part, is prohibited.
•The contents of this anual are subject to change without notice.
•Warning! The sports equip ent produced by Polanik Sp. z o. o. is designed for athletics training and use in sports
co petitions only. Please pay special attention when using the product, isuse of athletics equip ent can cause
serious injury or in extre e cases even death. That is why training and use during sports events have to be always
supervised by authorized sports personnel. In no event shall Polanik Sp. z o. o. be liable for any special, incidental,
indirect or consequential da ages in connection with the purchase or use of POLANIK products or costs over the
original cost of the product.

Instruction anual/technical specification P-647 3/4
I. General description
POLANIK landing area cover P-647 is designed to protect the landing area outdoors.
II. Technical specification
Code P 647
Designed for W-647
Weight [kg] 20 kg
Construction ade of strong vinyl, welded joints ake it very her etic, equipped
with special etal hooks for fastening to landing area
III. Preparing for first use
The cover is ready to use after unpacking.
IV. Assembly
Put cover on the asse bled landing area, and then fasten it to the landing area seg ents with hooks.
V. Operating
Stepping on the cover, treading on it in footwear is strongly prohibited. You ust not put any tables, chairs, benches
or any other objects whose unit pressure exceeds 1kg/1c
2
on the covered landing area.

Instruction anual/technical specification P-647 4/4
VI. Maintenance
Due to the hygiene require ents it is reco ended that the cover should be cleaned regularly with co only
available detergents. Before you start wiping it, please try to clean a s all spot on its botto side in order to check
the reaction with the PVC fabric.
VII. Storing
It cannot be bent or pressed by any objects during storing. That ay defor it per anently. A storing facility should
be clean and dry. The facility ought to provide in. te perature 5º C.