Polar Electro FT60 User manual

User Manual
Manuel d’Utilisation
Polar FT60™
Manufactured by
Polar Electro Oy
Professorintie 5
FIN-90440 KEMPELE
Tel [phone]
Fax [phone]
www.polar.fi
17934435.00 ENG/FRA A WINLEE

ENGLISH
ENGLISH

Contents
1. GET STARTED.................................. 4
Get to Know Your Polar FT60 ................. 4
Start With Basic Settings ..................... 5
Wrist Unit Buttons and Menu Structure ...... 6
Symbols on the Display....................... 7
2. BEFORE TRAINING............................. 8
Activate Your Polar Star Training Program .. 8
Change/End your program................11
Test Your Fitness Level...................12
3. TRAINING.....................................15
Wear the WearLink ..........................15
Start Training.................................16
Start Training With OwnZone ................17
During Training...............................18
Stop Training Recording ..................... 21
4. AFTER TRAINING .............................22
Training Feedback ...........................22
Weekly Follow-up............................24
Program Update..............................26
Weight Diary .................................27
Follow Your fitness Test Results.............28
Review Training Data ........................29
Transfer Data.................................31
5. SETTINGS.....................................32
Watch Settings...............................32
Training Settings.............................32
User Information .............................33
General Settings .............................34
Accessory Settings...........................35
Footpod Calibration* .....................35
ENGLISH

6. CUSTOMER SERVICE INFORMATION .........36
Caring for Your Polar FT60 ..................36
Service.....................................36
Changing Batteries........................37
Precautions ..................................39
Troubleshooting..............................41
Technical Specifications ....................42
Guarantee and Disclaimer ................... 43
ENGLISH

1. GET STARTED
Get to Know Your Polar FT60
The Wrist Unit records and displays
your heart rate and other data during
training.
The WearLink transmits the heart rate
signal to the wrist unit. The transmitter
consists of a connector and strap.
Register your Polar product at
http://register.polar.fi, and help us
improve our products and services to
better meet your needs.
ENGLISH
4Get Started

Start With Basic Settings
To activate your Polar FT60, press and hold any
button for one second. Once the FT60 is
activated, it cannot be switched off.
1. Language: Select Deutsch,English,Español,
Français,Italiano,Português or Suomi with
UP/DOWN. Press OK.
2. Please enter basic settings is displayed.
Press OK.
3. Select Time format.
4. Enter Time.
5. Enter Date.
6. Select Units, metric (KG, CM) or imperial (LBS,
FT). By selecting lbs/ft, calories are displayed
as CAL, otherwise they are shown as KCAL.
Calories are measured as kilocalories.
7. Enter Weight.
8. Enter Height.
9. Enter Date of birth.
10. Select Sex.
11. Settings OK? is displayed.
Select Yes to accept and save the settings.
Basic settings complete is displayed and the
FT60 enters Time mode.
Select No if you want to change the settings.
Please enter basic settings is displayed.
Re-enter your basic settings.
To modify your personal settings later, see
Settings.
ENGLISH
Get Started 5

Wrist Unit Buttons and Menu Structure
UP: Enter the menu and move through
selection lists, adjust values
OK: Confirm selections, select training
type or training settings
DOWN: Enter the menu and move through
selection lists, adjust values
BACK:
• Exit the menu
• Return to the previous level
• Cancel selection
• Leave settings unchanged
• With a long press, return to Time view
LIGHT:
• Illuminate the display
• With a long press, enter quick menu in Time view (to lock buttons, set alarm or select time zone) or
during training (to adjust training sounds or lock buttons)
ENGLISH
6Get Started

Symbols on the Display
The following table presents the display symbols and their descriptions.
Symbol Description
The battery of the wrist unit is low.
The alarm is active.
Sounds are off.
Time 2 is in use. Number two is displayed at the lower right corner of the display.
You have one or more new messages.
The button lock is active.
The footpod is in use. If the symbol is blinking, the FT60 is trying to establish a
connection with the footpod.
The GPS sensor is in use. If the symbol is blinking, the FT60 is trying to establish a
connection with the GPS sensor, or the GPS sensor is trying to establish a connection
with the satellites.
Heart rate is transmitted.
ENGLISH
Get Started 7

2. BEFORE TRAINING
Activate Your Polar Star Training
Program
The adaptive, personalized and in-built Polar Star
Training Program gives you the optimal intensity
and time targets for your training. The wrist unit
gives feedback on your performance after each
training session and once a week.
The Polar FT60 creates a training program based
on your user information (weight, height, age,
sex), fitness level, activity level, and training goal.
By analyzing your weekly training results and
fitness level, the wrist unit gives you training
guidance for the following week. The training
program adapts to your training habits and to your
changing fitness level.
1. In Time mode, select Menu > Applications >
Training program > Create new program .
2. Perfom Polar Fitness Test. For more
information, see Test Your Fitness Level.
3. Select your training goal:
•Improve fitness if your target is to improve
your current cardiovascular fitness level and
you are able to train regularly.
•Maximize fitness if your target is to
maximize your current cardiovascular fitness
level, and if you have been training regularly
for at least 10-12 weeks and training nearly
every day is not a problem for you.
•Lose weight if your target is to lose some
weight.
4. Training program created! is displayed.
ENGLISH
8Before Training

5. Next, View week targets? is displayed. Select YES to view the time and calorie targets for your first
training week. If you select No,Training program active! is displayed and the wrist unit returns to Time
view.
Time target
The amount of time you should train during this week.
Calorie target
The number of calories you should burn this week.
6. Press DOWN and OK to view your target training time in three different heart rate zones (intensity
targets). Press DOWN to change the display.
Time target for intensity zone 1
The bars indicate the target times in different intensities. The bars fill up as you train. The target time for intensity
zone 1 for the week is displayed in the lowest row.
7. You have now activated your training program. Press BACK to return to Time mode.
To view your week targets later, select Menu > Applications > Training Program > View week targets .
ENGLISH
Before Training 9