Polar Electro S610 User manual

QuickGuide
USER’S MANUAL
USA/GBR
HEART RATE MONITOR HEART RATE MONITOR
COMPLETE HR
Displays your heart rate as bpm and % of HRmax, average
heart rate and exercise duration.
Allows you to set 5 exercise sets for interval training with HR
target zones and recovery calculation. Records complete files
of the exercises.
Predicts your maximal oxygen uptake.
Reduces possible interference from other heart rate monitors.
Sports watch features.
Infra red communication allows two-way exchange of
settings and exercise data with a PC.
S610i™S610i™
How to Start Measuring Your Heart Rate (BasicUse)
1. Place the transmitter around your chest and wet the electrodes. Place the
receiver on your wrist.
2. Press and hold the OK button to start the measurement. The stopwatch and
the exercise recording start. Your heart rate will appear in about 15 seconds.
How to Stop Measuring Your Heart Rate
1. Press the stop button. The stopwatch and other calculations stop. Heart rate
measurement continues but exercise data is not recorded into a file anymore.
2. Press the stop button again. The receiver returns to Time of Day display.
Up
• move onward
• increase the
selected value
Down
• move backward
• reduce the
selected value
Stop
• exit the
displayed mode
• return to the
Time of Day display
Signal/Light
OK
• start measuring the heart rate
• lock in your selection
179435 USA/GBR B

RoadMap
OK
Manufactured by:
Polar Electro Oy
Professorintie 5
FIN-90440 KEMPELE
Tel. [phone]
Fax [phone]
www.polar.fi
Distributed in the USA by Polar Electro Inc.
370 Crossways Park Drive
Woodbury NY 11797-2050
U.S.A.
1-800-227-1314
www.polarusa.com
Distributed in Canada by Polar Electro Canada
c/o Lanco Logistics Inc.
4330 Joseph Dubreuil
Lachine, Quebec
CANADA, H8T 3C4
1-888-918-5043
DearCustomer
Recyclable material. Graphic Design CIS, Finland.
Congratulations on purchasing a Polar Heart Rate
Monitor! We are proud to assist you in achieving
personal fitness and performance goals.
If you want to get even more out of your
Polar heart rate monitor during training,
check our web sites for the best product
and training tips, software updates
and other value added services:
USA and Canada: www.polarusa.com
Other countries: www.polar.fi
Scroll Up / Down
STOP - exit the displayed mode
Exercise Set Memory Set Function Set User Set Monitor Set Watch Set
Time Of Day File Options Fit. Test Connect
BasicUse, E0
ExeSet 1, E1
E2
E3
E4
E5
Interval
On/OFF
Rec. Rate
5 Sec
15 Sec
60 Sec
OwnCal
On/OFF
Fit. Test
On/OFF
HRmax-p
On/OFF
lbs
ft inch
Birthday
Sex
Activity
HRmax
VO2max
Sound
On/OFF
Units
1/2
Help
On/OFF
Alarm
Time
1/2
Date
Remind
On/OFF

The Polar heart rate monitor offers you various ways to customize your exercise
sessions so they meet your personal needs.
For example, use the Interval Trainer™ function to guide you through a
complete interval training session. Or, you can choose the functions that suit
you best: OwnCal® calorie calculation, timers, recovery calculation, etc. After
training, you can review your exercise file and transfer it to your computer for
analysis with Polar Precision Performance™ software. Monitor your fitness
level, and any long-term changes in it, by performing the quick and easy Polar
Fitness Test™.
Please read this manual carefully to familiarize yourself with the Polar heart
rate monitor. This is where you can find the information you need to use and
maintain your equipment. The function road map on the front cover is a quick
guide to the versatile features of the Polar heart rate monitor. Please tear it off
and save it for your reference.
Please refer to the glossary for special terms, display symbols and text
explanations. The alphabetical index will help you quickly find answers to
any questions that you might encounter while using your Polar heart rate
monitor.
Thank you for choosing Polar!
S610i manual USAGBR A.pm6 25/7/02, 21:371

CONTENTS
A. Getting Going ....................... 5
Heart Rate Monitor Parts ........................5
Buttons and Their Functions ...................6
Easy Start ..................................................8
How to Prepare the Wrist Receiver ...8
How to Put the Transmitter On .........9
How to Start Measuring
Your Heart Rate...................................9
How to Stop Measuring
Your Heart Rate.................................10
After Exercising..................................10
Modes and Their Functions...................11
B. How to Enter Settings ........ 16
User Information Settings .....................18
Exercise Settings.....................................21
Selecting Exercise Type..........................21
Setting Exercise Sets ..........................22
Setting Timers................................24
Setting Heart Rate Limits ............. 24
Turning Heart Rate Limits on/off ..24
Setting Interval Type.....................25
Setting Number of Intervals and
Recoveries ......................................26
Setting Recovery Calculation .......26
Naming Exercise Sets .........................27
Setting Recording Rate .........................28
Turning Functions on/off.......................29
OwnCal Calorie Counter on/off .......29
Fitness Test on/off..............................29
Predicted Maximum
Heart Rate on/off...............................30
Monitor Settings ....................................30
Turning Activity/Button
Sound on/off ......................................30
Selecting Measuring Units ................ 31
Turning Help on/off...........................31
Watch Settings ..................................... 32
Setting Alarm .....................................32
Setting Time of Day...........................32
Setting Date .......................................33
Turning Reminders on/off.................33
Setting Tips ............................................. 34
Swap Time 1 or Time 2......................34
Shortcut to Watch Settings ..............34
Swap Measuring Units ...................... 34
Swap Date, User ID number,
User Name and Logo .........................34
C. Exercise ................................ 35
Heart Rate Measure Mode.................... 35
Exercise Recording Mode ......................37
Turning Heart Rate
Zone Alarm on/off ..............................37
Swapping the Heart Rate Limits ........38
Illuminating the Display .....................38
Storing Lap and Split Time ................39
Pausing the Exercise ........................... 39
Swapping the Displayed
Exercise Information .........................40
Resetting the Stopwatch to Zero .....41
Starting an Exercise Set .........................42
Exercising with Interval Training Set ...42
Warm-up Phase..................................43
Interval Phase.....................................44
Cool-down Phase ...............................46
Interrupting an Interval
Training Exercise................................47
Exercising with BasicSet ........................ 47
Starting the Timers............................47
Starting Recovery Calculation ..........48
Stopping the Exercise ............................48
Tips During the Exercise ........................48
Swapping the Recording Rate..........48
Swapping the Exercise Type .............48
Restarting the Interval or
Recovery Calculation .........................49
Interrupting an Interval or
Recovery Calculation .........................49
Interrupting a Phase of
Interval Training Exercise .................49
Heart Touch Function........................49
D.How to Recall
Training Information .......... 50
Exercise Time ..........................................53
Recovery Information of BasicSet ........53
Heart Rate Limits ................................... 53
Exercise Time within, above and below
the Heart Rate Zones.............................54
Calorie Expenditure ...............................54
Cumulative Calorie Count .....................54
Cumulative Exercise Time Count ..........54
Interval Training Information ...............55
Lap Information .....................................57
S610i manual USAGBR A.pm6 25/7/02, 21:372-3

A 5
RecordedHeartRate Samples................58
Records File ............................................. 58
Resetting Cumulative Counts to Zero ... 58
Deleting a File .........................................59
Deleting All Files ..................................... 59
E. Connection to Computer.... 60
Downloading Training Data to
Computer ................................................60
Uploading Settings from Computer.....61
F. Polar Fitness Test................. 63
OwnIndex ...............................................63
Predicted Maximum Heart Rate ...........65
Fitness Test Settings...............................66
Carrying Out the Test ............................66
Update OwnIndex and HRmax-p.............68
Fitness Classes.........................................69
G. Care and Maintenance ........ 71
H. Precautions .......................... 73
I. Frequently Asked
Questions ............................. 77
J. Technical Specifications ..... 81
K. Limited Polar International
Guarantee ............................ 84
L. Disclaimer ............................ 85
M. Polar Glossary ..................... 86
Display Symbols....................................... 88
Display Texts ............................................ 89
Index......................................................... 92
A.GETTINGGOING
A 5
Heart Rate Monitor
Parts and Their
Functions
The wrist receiver
displays your heart rate
and other data during
exercise. Enter your
personal settings into the
receiver and analyze the
exercise files after you’re
done.
The elastic strap holds
the transmitter
comfortably, yet firmly,
in the correct position.
The transmitter detects
your heart rate and
transmits it to the wrist
receiver.
S610i manual USAGBR A.pm6 25/7/02, 21:374-5

A 6 A 7
STOP
SIGNAL/
LIGHT
RESET
OK
Signal/Light Turns the beep on or off.
Turns the backlight on.
Reset Resets the heart rate monitor.
Stop Return -Stops measuring the heart rate.
Exits the displayed mode and returns to
the previous mode level.
Returns to the Time of Day display
from any mode by pressing and
holding the stop button.
OK Accept - Starts measuring the heart rate (start).
Enters the displayed mode shown on
the lower level (start). Locks in your
selection (ok). Records lap information
(lap). The Help text (start, ok or lap)
that appears on the display above the
button indicates its use.
Useful Tips
• Briefly pressing a button (approximately 1 second) will do different
things than pressing and holding the button for a longer period of
time (approximately 2 to 5 seconds). If your press the button for a
longer period of time, you can use shortcuts.
• The buttons are slightly stiffer than those of an ordinary watch to
prevent them from being pressed accidentally.
• You can always return to the Time of Day display from the Options
setting or File recalling loops by pressing and holding the stop button.
• See the glossary for display symbols and text interpretation.
Up Moves to the following
mode. Increases the
selected value.
Down Returns to the previous
mode. Decreases the
selected value.
Buttons and Their Functions
S610i manual USAGBR A.pm6 25/7/02, 21:376-7

A 8 A 9
How to Put the Transmitter On
1. Attach the transmitter to the elastic strap.
2. Adjust the strap length to fit snugly and
comfortably. Secure the strap around your
chest, just below the chest muscles, and
buckle it.
3. Lift the transmitter off your chest and
moisten the grooved electrode areas
on the back.
4. Check that the wet electrode areas are firmly
against your skin and the Polar logo is in a
central, upright position.
How to Start Measuring Your Heart Rate
1. Begin with the display that shows
the time of day.
2. Keep the wrist receiver within
3 feet/ 1 meter of your transmitter.
3. Check that you are not near people that have
heart rate monitors, high voltage power lines,
televisions, mobile phones or other sources of
electromagnetic disturbance.
How to Prepare the Wrist Receiver
1. Since the display is blank when the receiver leaves the
factory, you have to activate the wrist receiver by pressing
the OK button twice, after which the Time of Day display
appears. This is a one-off procedure; once you have turned
on your receiver you can not turn it off anymore.
2. You may start measuring your heart rate right away
using the default settings. However, the following
settings are ones that it would be useful to change as
soon as possible: Time of Day (see section Watch Settings)
and personal user settings (see section User information
settings).
3. Polar heart rate monitor has various functions that you
can use according to your personal training needs. For
more information, see section Modes and their functions.
You can either manually enter the settings by pressing
the receiver buttons or you can define your settings
using Polar Precision Performance software, after which
the data should be transferred from your computer to
the wrist receiver.
4. Wear the wrist receiver as you would wear an ordinary
watch. If you go biking, we recommend attaching the
wrist receiver to a Polar Bike Mount™.
Easy Start
S610i manual USAGBR A.pm6 25/7/02, 21:378-9

A 10 A 11
4. Press the OK button to start measuring your heart rate. A heart symbol
will start flashing and your heart rate (beats per minute) will appear in
a maximum of 15 seconds.
5. Press OK again. The stopwatch starts running and you can start
exercising. The exercise data will only be stored in a file if you have
turned the stopwatch on.
How to Stop Measuring Your Heart Rate
1. Press the stop button. The stopwatch and other calculations stop.
The heart rate measuring continues, although exercise data is no longer
recorded.
2. Press the stop button again. The heart rate measuring stops.
The receiver shows the Time of Day display again.
After Exercising
1. Carefully wash the transmitter with a mild soap and water solution.
2. Rinse it with pure water.
3. Dry the transmitter carefully with a soft towel.
4. Store the transmitter in a clean and dry place. Dirt impairs the
conductivity and functioning of the transmitter. Sweat and moisture can
keep the electrodes wet and the transmitter activated, which shortens
battery life.
Modes and Their Functions
Your Polar heart rate monitor has six main modes: Time of Day, Exercise,
File, Options, Fitness test and Connection.
1. TIME OF DAY
You can use your Polar heart rate monitor as an ordinary watch that
shows the date and the day of the week, as well as contains an alarm
function. You can also change between two different countries’ time
zones. In addition, the following functions can be uploaded from a
computer and utilized:
• 7 alarm sound reminders
• your personal logo, user number or user name
2. EXERCISE
In the Exercise mode, you measure your heart rate and exercise
information is recorded in the File mode. You can preset up to five
exercise sets for your personal needs. You can also name these exercises
on your receiver. When you start exercising, just select one of the saved
sets. Or, you can select BasicUse (heart rate measurement without
heart rate limits, timers or other exercise guiding functions).
S610i manual USAGBR A.pm6 25/7/02, 21:3710-11

A 12 A 13
A. During BasicUse, you can save 99 split and lap times with current,
maximum and average heart rates for each lap. You can configure the
display to show information on the following:
• your current heart rate, average heart rate or a reading of your
maximum heart rate in percentages
• the current exercise time (stopwatch)
• time of day
• current lap and split time as well as the lap number
• calorie count for your exercise session
B. Freely programmable BasicSet will automatically guide you
through your exercise session with the help of the following functions:
• three adjustable target heart rate limits
• three adjustable, alternating timers
• time-based or heart-rate-based recovery calculation
C. Freely programmable Interval Trainer will automatically guide
you through your interval training session with the help of the
following, preset exercise phases:
• warm-up with a target heart rate zone and a countdown timer
• up to 30 intervals with a target heart rate zone. After each
interval you have a recovery calculation option.
• cool-down with a target zone and a countdown timer
3. FILE
Your receiver stores exercise information in 99 exercise files:
• the start date and time of the exercise
• total exercise time
• the average and maximum heart rate readings for the exercise session
• the recovery value (only BasicSet)
• your heart rate limits used during the exercise
• your time spent in, above and below your target zones during exercise
• OwnCal calorie expenditure
• your cumulative calorie expenditure
• your cumulative exercise time
• your interval training information: warm-up, interval and cool-down phases
• your lap information: best lap time; lap and split times; and current,
average and maximum heart rate for each lap
• your heart rate samples recorded in the set recording rate
In addition to exercise file, your cumulative calories and exercise time are
updated to your records file.
S610i manual USAGBR A.pm6 25/7/02, 21:3712-13

A 14 A 15
4. OPTIONS
In the Options mode, you can enter the following settings:
Exercise Settings: You can select BasicUse with no settings or 5 freely
programmable BasicSets or Interval Training Sets
Memory Settings:Set the recording rate of your heart rate of 5
seconds, 15 seconds or 1 minute
Function settings: OwnCal calorie counter on/off, fitness test on/off,
predicted maximum heart rate on/off
User-specific Information: weight, height, date of birth, gender,
activity level, maximum heart rate and maximal oxygen uptake
Monitor Settings: activity/button sound on/off, measurement units,
Help on/off
Watch Settings: alarm, time of day, date, reminders on/off
5. FITNESS TEST
In this mode you can:
• perform the Polar Fitness Test
• recall your latest test results; OwnIndex and HRmax-p values
• update your user information to reflect your most recent OwnIndex and
HRmax-p values
6. CONNECTION
In this mode you can:
• upload your receiver settings from your computer to receiver with Polar
Precision Performance version 3 or later
• download recorded exercise information to your computer for detailed
analysis with Polar Precision Performance version 3 or later
S610i manual USAGBR A.pm6 25/7/02, 21:3714-15

B 17B 16
Time Of Day File Options Fit. Test Connect
Exercise Set Memory Set Function Set User Set Monitor Set Watch Set
B.HOWTOENTERSETTINGS
This section describes how to manually enter
settings by pressing the receiver buttons. However,
heart rate monitor offers you a faster way as well:
prepare your settings with Polar Precision
Performance software and upload them to your
receiver from your computer. See chapter
“Uploading settings from computer”.
1. In the Time of Day display, scroll up or down until OPTIONS is displayed.
2. Press OK to enter the Options mode. EXERCISE SET is displayed.
3. Scroll up or down until the desired setting mode is displayed.
4. Press OK to start the settings.
• Move forward and backward by using the up or down buttons.
• Press OK to start adjusting the value.
• Scroll up or down to adjust the value.
• Press OK to lock in your selection.
• Move backward to the previous setting level by pressing the stop button.
• To return to the Time of Day display, wherever you are in the Options
settings: Press and hold the stop button.
• The digits run faster if you press and hold the up or down button as you
adjust the value. Release the button when approaching the desired value.
• On the display each function is presented by an abbreviated text.
A flashing block on the display indicates how far you are in the
setting mode.
S610i manual USAGBR A.pm6 25/7/02, 21:3716-17

B 19B 18
User Information Settings
In the User Set loop you can move forward only by pressing OK.
Measuring units depend on your choice in Options/ Monitor Set/ Unit 1 or Unit 2.
Units 1 Units 2
Weight kg lbs
Height cm ft/ inch
Date of Birth setting order day - month - year month - day - year
1. In the Time of Day display scroll up or down until OPTIONS is displayed.
2. Press OK to enter the Options mode. EXERCISE SET is displayed.
3. Scroll up or down until USER SET is displayed.
4. Press OK to start the user information settings.
Weight (lbs or kg)
5. Scroll up or down to adjust your weight. Press OK.
Height (ft/ inch or cm)
6. Scroll up or down to adjust your height. Press OK.
Date of Birth (Birthday)
7. Scroll up or down to select your month / day
of birth. Press OK.
8. Day / Month appears. Scroll up or down
to select the day / month. Press OK.
9. Year appears. Scroll up or down to adjust the
year of birth. Press OK.
Sex
10.Scroll up or down to select your gender. Press OK.
Activity Level (Activity)
11.Scroll up or down to select your activity level for Polar Fitness Test.
Press OK.
Assess your long-term physical activity level. Do not change your activity
level description if your regular exercise habits have changed during the last
six months.
Low You do not participate regularly in programmed recreational sport or
heavy physical activity. Ex. you walk only for pleasure or occasionally
exercise sufficiently to cause heavy breathing or perspiration.
Middle You participate regularly in recreational sports. Ex. you run 3-6 miles /
5-10 km per week or spend 1/2–2 hours per week in comparable
physical activity or, your work requires modest physical activity.
High You participate regularly, at least 3 times a week, in heavy physical
exercise. Ex. you run 6-12 miles / 10-20 km per week or spend 2-3
hours per week in comparable physical activity.
Press and hold
signal/light button to
change the units for
weight or height.
Units 1: setting order
is day - month - year.
Units 2: setting order
is month - day - year.
Options
User Set
kg/ lbs cm/ feet inch Birthday Sex Activity HR
max
VO
2max
S610i manual USAGBR A.pm6 25/7/02, 21:3718-19

B 21B 20
Top You participate regularly in heavy physical exercise at least 5 times a week.
Ex. you exercise to improve performance for competitive purposes.
Maximum Heart Rate Value (HRmax)
12.Your age-predicted maximum heart rate value is displayed as a default
setting when you set this value for the first time. If you know your
exact clinically tested current maximum heart rate value, set the
value by scrolling up or down.
13.Press OK.
If you do not know this value, update it in the Fitness Test mode after
having carried out the Polar Fitness Test.
Maximal Oxygen Uptake Value (VO2max)
14.The wrist receiver suggests value 35 for females and value 45 for males
as a default setting when you set this value for the first time. If you
know your exact clinically tested current maximal oxygen uptake
value, set the value by scrolling up or down.
15.Press OK. USER SET appears.
If you do not know this value, update it in the Fitness Test mode after
having carried out the Polar Fitness Test.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
Exercise Settings
When you start setting your exercise preferences your first choice is to select
whether you want to set your personal exercise set or to exercise with
BasicUse option. If you select to start setting the exercise sets, your second
choice is whether you want to select BasicSet or an Interval Training Set.
Selecting Exercise Type
BasicUse (E0)
BasicUse is a simple mode for exercising.
You do not have to do any settings
before exercising with this Exercise
mode. While exercising, you can see
the following optional values on the
display:
• current heart rate or average
heart rate of the exercise
• stopwatch
• time of day
• split- and lap times
Additionally, you can follow calories
of your exercise session and
percentage of your maximum heart
rate, if you have set all the user
information and turned the functions
on.
Exercise Set (E1-E5)
During exercising with this mode you
can see the same optional values as
in the BasicUse mode. Additionally,
the exercise set will guide you
through your exercise according to
the settings you have made. You can
also name the exercise sets Ex. after
an exercise type.
You can set following exercise
guiding functions:
• 3 heart rate limits
• 3 countdown timers
• interval function
• recovery calculation
S610i manual USAGBR A.pm6 25/7/02, 21:3720-21

B 23B 22
Options
Exercise Set
E0 E1 E2 E3 E4 E5
Exercise Set 1 - 5
Interval On Interval OFF (BasicSet) Recovery Hr
Timer 1 Timer 2 Timer 3 Limits 1 Limits 2 Limits 3 Recovery Timer
Timer 1 Limits 1 Interval Repeat Limits 2 Recovery Timer 3 Limits 3
Timer Interval Timer
Manual Interval Interval Hr Recovery Hr
Setting Exercise Sets
Preset exercise sets ready for five exercise sets; when you start exercising,
just select one of the sets.
Interval Training Set
If you choose interval on, you can
set 3 different exercise phases for
each exercise set in following order:
Warm-up phase
• countdown timer 1 On/OFF
• heart rate limits 1 On/OFF
Interval phase
• interval calculation type: manual,
time- or heart-rate-based interval
• number of repeated interval phases
• heart rate limits 2 On/OFF
• time- or heart-rate-based
recovery calculation On/OFF
Cool-down phase
• countdown timer 3 On/OFF
• heart rate limits 3 On/OFF
If you set the countdown timers of
the phase off, you have to manually
stop the phase.
BasicSet
If you choose interval off, you can
set the following functions to your
exercise:
• timer 1 On/OFF
• timer 2 On/OFF
• timer 3 On/OFF
• heart rate limits 1 On/OFF
• heart rate limits 2 On/OFF
• heart rate limits 3 On/OFF
• recovery calculation On/OFF
You should select the timers on
sequentially. Ex. you cannot set
timer 2 on if timer 1 is off.
1. In the Time of Day display
scroll up or down until
OPTIONS is displayed.
2. Press OK to enter the
Options mode. EXERCISE
SET is displayed.
3. Press OK to start the exercise settings. BasicUse E0 or exercise set E1-E5
is displayed.
4. Scroll up or down until the desired exercise type is displayed. Press OK.
If you chose BasicUse (E0): to return to the Time of Day display, press
and hold the stop button and skip the rest of the exercise settings.
If you chose exercise set (E1-E5) Interval On/OFF is displayed.
5. Scroll up or down to turn the interval function on or off. Press OK.
Timer 1 is displayed.
S610i manual USAGBR A.pm6 25/7/02, 21:3722-23

B 25B 24
Setting Timers
If you start from Time of Day display, repeat steps 1-5.
6. Scroll up or down until desired timer is displayed. Press OK to start
setting the timer.
7. Scroll up or down to turn the timer on or off. Press OK.
Timer OFF: skip steps 8-9.
8. Scroll up or down to adjust minutes. Press OK.
9. Scroll up or down to adjust seconds. Press OK.
Setting Heart Rate Limits
If you start from Time of Day display, repeat steps 1-5.
6. Scroll up or down until desired Limits is displayed.
7. Press OK to start setting the limits.
8. Lim High appears. Scroll up or down to adjust your upper limit. Press OK.
9. Lim Low appears. Scroll up or down to adjust your lower limit. Press OK.
Turning Heart Rate Limits on/off
If you start from Time of Day display, repeat steps 1-5.
6. Scroll up or down until desired Limits is displayed.
7. Press and hold the signal/light button to turn limits on or off. Release.
Setting Interval Type
You can select 3 optional types of intervals:
A. Time-based interval Ends your interval when you have
used the selected time.
B. Heart-rate-based interval Ends your interval as you reach the
selected heart rate.
When selecting heart-rate-based
interval, recovery calculation must be
set on.
C. Manual interval End the interval training session
by pressing and holding OK.
If you start from Time of Day display, repeat steps 1-5.
6. Scroll up or down until Interval TIMER/ Hr/ MANUAL is displayed. Press
OK to start setting the interval type. TIMER/ Hr/ MANUAL is flashing.
7. Scroll up or down to select the interval type that will be used to end the
interval. Press OK. If you chose manual interval skip steps 8 - 9.
A. Time-based interval Or
8. Scroll up or down to adjust
minutes. Press OK.
9. Scroll up or down to adjust
seconds. Press OK.
Interval TIMER appears.
B. Heart-rate-based interval
8. Scroll up or down to adjust the
heart rate that will end your
interval. Press OK.
Interval Hr appears.
S610i manual USAGBR A.pm6 25/7/02, 21:3724-25

B 27B 26
Setting the Number of Intervals and Recoveries (Repeat)
If you start from Time of Day display, repeat steps 1-5.
You can set up to 30 intervals and recoveries (if set on) for an interval phase.
6. Scroll up or down until Repeat is displayed.
7. Press OK to start setting the number.
8. Scroll up or down to adjust the number. Press OK.
Or
If you do not know in advance the number of intervals and recoveries select
continuous interval. The intervals will succeed until you manually stop the
exercise or until 30 intervals have been made.
8. Scroll down until Cont appears. Press OK.
Setting Recovery Calculation
A. Time-based recovery Ends your recovery as you reach the
preset time.
B. Heart-rate-based recovery Ends your recovery as you reach the
preset heart rate.
If you start from Time of Day display, repeat steps 1-5.
6. Scroll up or down until Recovery TIMER/ Hr is displayed.
7. Press OK to start setting recovery calculation on or off. On/OFF is flashing.
8. Scroll up or down to turn the recovery calculation on or off. Press OK.
OFF: skip steps 9-11.
On: TIMER/ Hr is flashing.
9. Scroll up or down to select recovery timer or heart rate. Press OK.
A. RecoTime is displayed.
10.Scroll up or down to adjust minutes. Press OK.
11.Scroll up or down to adjust seconds. Press OK.
Recovery TIMER appears.
B. RecoHr is displayed.
10.Scroll up or down to adjust the value. Press OK.
Recovery Hr appears.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
Naming Exercise Sets
You can name the exercises, with seven letters, numbers or punctual marks.
The available digits are: 0-9, space, A-Z, a-z, - % / ( ) * + : ?.
1. In the Time of Day display scroll up or down until OPTIONS is displayed.
2. Press OK to enter the Options mode. EXERCISE SET is displayed.
3. Press OK. E0-E5 is displayed.
4. Scroll up or down until desired exercise set (E1-E5) is displayed.
5. Press and hold signal/light button. Adjustable letter is flashing.
6. Scroll up or down to select the desired mark. Press OK.
7. Repeat previous step until you have chosen all 7 letters.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
S610i manual USAGBR A.pm6 25/7/02, 21:3726-27

B 29B 28
Options
Function Set
OwnCal On/OFF Fit. Test On/OFF HRmax-p On/OFF
1. In the Time of Day display scroll
up or down until OPTIONS is
displayed.
2. Press OK to enter the Options
mode. EXERCISE SET is displayed.
3. Scroll up or down until FUNCTION SET is displayed.
4. Press OK to start the function settings. OwnCal is displayed.
To set the following functions on you have to set your user information.
If kg/lbs are displayed as you start setting the function on, the wrist
receiver points out that you have not set your all user information.
OwnCal Calorie Counter on/off
If you start from Time of Day display, repeat steps 1-4.
5. Press OK to start setting the OwnCal function. On/OFF starts to flash.
6. Scroll up or down to set the OwnCal on or off. Press OK.
To get the most accurate OwnCal results, update the VO2max setting and the
HRmax setting with clinically measured values (if available). If you do not
know your clinically measured values perform Polar Fitness Test and update
the OwnIndex and HRmax -p settings in Fitness Test mode.
Fitness Test on/off
If you start from Time of Day display, repeat steps 1-4.
5. Scroll up or down until Fit. Test is displayed.
6. Press OK to start setting the Fitness Test. On/OFF starts to flash.
7. Scroll up or down to set the Fitness Test on or off. Press OK.
You can program your receiver to record data in 5, 15 or 60 seconds
intervals.
1. In the Time of Day display scroll up or down
until OPTIONS is displayed.
2. Press OK to enter the Options mode.
EXERCISE SET is displayed.
3. Scroll up or down until MEMORY SET is
displayed.
4. Press OK to start the memory settings. Rec. Rate is displayed.
5. Scroll up or down to select the desired recording rate. As you change
the recording rate you can see the memory there is left in the lower
row. Press OK.
The recording time of the receiver depends on the selected recording rate
(5 s, 15 s, or 60 s). When the memory is full, you can continue exercising
but the exercise is no longer recorded. The following table shows the
maximum exercise times for each recording rate.
Recording rate Maximum exercising time
5 s 22 h 03 min
15 s 66 h 10 min
60 s 99 h 59 min one file and total 260h
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
Options
Memory Set
Rec. Rate 5 Sec / 15 Sec / 60 Sec
Setting Recording Rate Turning Functions on/off
S610i manual USAGBR A.pm6 25/7/02, 21:3728-29

B 31B 30
Options
Monitor Set
Sound On/OFF Units 1/2 Help On/OFF
1. In the Time of Day display scroll up
or down until OPTIONS is displayed.
2. Press OK to enter the Options mode.
EXERCISE SET is displayed.
3. Scroll up or down until MONITOR
SET is displayed.
4. Press OK to start the monitor settings. Sound is displayed.
Turning Activity/Button Sound on/off
If you start from Time of Day display, repeat steps 1-4.
5. Press OK to start setting the sound. On/OFF starts to flash.
6. Scroll up or down to set sound on or off. Press OK.
Your receiver has two distinct sounds: activity/button sound and alarms for
heart rate zones, watch and fitness test. This setting includes only the
activity/button sound settings.
Certain Measure and Exercise mode settings will be audible: start, stop,
interval phase start and end and recovery calculation end.
Selecting Measuring Units
If you start from Time of Day display, repeat steps 1-4.
5. Scroll up or down until Units is displayed.
6. Press OK to start setting the units. 1 or 2 starts to flash.
7. Scroll up or down to select the unit which best suits you. Press OK.
The units settings affect the units in the user information settings and the
order of your date of birth settings.
Units 1: kg, cm, day-month-year Units 2: lbs, feet, month-day-year
Turning Help on/off
If you start from Time of Day display, repeat steps 1-4.
5. Scroll up or down until Help is displayed.
6. Press OK to start setting the Help function. On/OFF starts to flash.
7. Scroll up or down to set the Help on or off. Press OK.
If you turn Help on, the flashing arrows guide you to use the correct
buttons in the Options and File modes. If you want to change the middle
row information during exercise, the function name will appear for a few
seconds.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
Predicted Maximum Heart Rate on/off (HRmax-p)
If you start from Time of Day display, repeat steps 1-4.
5. Scroll up or down until HRmax-p is displayed.
6. Press OK to start setting the HRmax-p. On/OFF starts to flash.
7. Scroll up or down to set the HRmax-p on or off. Press OK.
HRmax-p can be turned on only if Polar Fitness Test is on.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
Monitor Settings
S610i manual USAGBR A.pm6 25/7/02, 21:3730-31

B 33B 32
Options
Watch Set
Alarm Time 1/2 Date Reminder
12h Time mode:
month - day - year.
24h Time mode:
day - month - year.
1. In the Time of Day display
scroll up or down until
OPTIONS is displayed.
2. Press OK to enter the
Options mode. EXERCISE SET
is displayed.
3. Scroll up or down until WATCH SET is displayed.
4. Press OK to start the watch settings. ALARM is displayed.
Setting Alarm
If you start from Time of Day display, repeat steps 1-4.
5. Press OK to start alarm settings.
On/OFF starts to flash.
6. Scroll up or down to set alarm on or off.
Press OK. 24h: skip step 7.
7. 12h: AM/PM starts to flash. Scroll up or down to select AM or PM. Press OK.
8. The hours start to flash. Scroll up or down to adjust the hours. Press OK.
9. The minutes start to flash. Scroll up or down to adjust the minutes. Press OK.
When the alarm comes on, it will sound for one minute. You can turn it off
by pressing any of the buttons.
Setting Time of Day
If you start from Time of Day display, repeat steps 1-4.
5. Scroll up or down until TIME1/ TIME2 is displayed.
6. Press OK to start setting the time of day.
7. Time is flashing. Scroll up or down to select time
1 or time 2. Press OK.
8. 12h/ 24h starts to flash. Scroll up or down to select 12h or 24h time
mode. Press OK. 24h: skip step 9.
9. AM/ PM starts to flash. Scroll up or down to select AM or PM. Press OK.
10.The hours start to flash. Scroll up or down to adjust the hours. Press OK.
11.The minutes start to flash. Scroll up or down to adjust the minutes.
Press OK.
Setting Date
If you start from Time of Day display, repeat steps 1-4.
The date is displayed differently depending on whether you have set
12h or 24h time mode.
12h time: month-day-year 24h time: day-month-year
5. Scroll up or down until DATE is displayed.
6. Press OK to start adjusting the date.
7. Month / Day appears. Scroll up or down to select
the desired value. Press OK.
8. Day / Month appears. Scroll up or down to select
the desired value. Press OK.
9. Year digits start to flash. Scroll up or down to select the year. Press OK.
Turning Reminders on/off
If you start from Time of Day display, repeat steps 1-4.
5. Scroll up or down until REMIND is displayed.
6. Press OK to start setting the reminders.
7. Scroll up or down until desired reminder is displayed. The number of the
reminder is displayed in the corner of the display.
8. Press OK. On/OFF starts to flash.
9. Scroll up or down to set the reminder on or off. Press OK.
OFF: skip
steps 7-9.
Watch Settings
S610i manual USAGBR A.pm6 25/7/02, 21:3732-33

B 34 C 35
Time of Day
Heart Rate Measure Mode
Exercise Recording Mode
Swap Time 1 or Time 2
In the Time of Day display press and hold the down button. Time 1 or Time
2 is displayed in the uppermost row for a couple of seconds. Displayed time
will now be used in all watch and alarm functions. If you chose time 2, “2”
is displayed in the Time of Day display.
Shortcut to Watch Setting Loop
Press and hold the signal/light button for a few of seconds to enter into the
watch setting loop. If you want to skip some parts and go directly to a
watch function, scroll up or down until the desired watch function is
displayed. Set the function as in the “Watch settings” section.
Swap Measuring Units as you set your user information on weight and
height. Press and hold the signal/light button until the units are swapped.
Release the button.
Swap Date, User ID Number, User Name and Logo
You are able to set a user ID number, user name and logo by Polar Precision
Performance software. These settings are shown on the upper row of the
Time of Day display. You can swap between the user ID, user name, logo
and date by pressing and holding the up button.
C.EXERCISE
You can upload 7 reminders, each including time and name, to your wrist
receiver from Polar Precision Performance software.
The reminder sounds an alarm only when time of day is displayed. When
the reminder alarm comes on, it will sound for 15 seconds or you can turn it
off by pressing any of the buttons except the signal/light button. Erase the
reminder text by pressing any of the buttons except the signal/light button.
To continue your settings, press the stop button. To return to the Time of
Day display, press and hold the stop button.
Setting Tips You can use two modes in your
exercise: Measure or Exercise mode.
In the Measure mode you can see your
heart rate but your exercise is not
recorded. In the Exercise mode your
exercise is recorded and stopwatch
and other calculations are started.
1. Wear the transmitter and the wrist receiver as described in “Easy start” section.
2. To make sure that the code search will be successful:
• Keep the wrist receiver within 3 feet/ 1 meter of your transmitter.
• Check that you are not near: people with heart rate monitors, high
voltage power lines, televisions, mobile phones, cars, motor driven
exercise equipment or other electromagnetic disturbance.
Heart Rate Measure Mode
S610i manual USAGBR A.pm6 25/7/02, 21:3734-35