Polaroid Snap User manual

Instant Print Digital Camera | Appareil photo numérique avec
impression instantanée | Fotocamera digitale a stampa istantanea |
Digitale Sofortbildkamera | Cámara digital con impresión al instante |
Câmara digital com impressão instantânea
USER GUIDE
GUIDE DE L’UTILISATEUR | MANUALE UTENTE |
BEDIENUNGSANLEITUNG |
GUÍA DE USUARIO | GUIA DO UTILIZADOR

Hello and welcome to the Polaroid Snap™ .
Bonjour et bienvenue dans l’univers de la Polaroid Snap™ .
Ciao e benvenuto su Polaroid Snap™ .
Herzlich willkommen bei der Polaroid Snap™ .
Hola y bienvenido al mundo de Polaroid Snap™ .
Olá e sejam bem-vindos à Polaroid Snap™ .
EN
FR
IT
DE
ES
PT
EN
What’s in the Box
Get to KnowYour Snap
Using Your Snap
FR
Que trouve-t-on dans la boîte
Découvrez votre Snap
Utilisation de votre Snap
IT
Cosa c’è nella confezione
Impara a conoscere la tua Snap
Utilizzare la tua Snap
DE
Was ist in der Box
Lerne Deine Snap kennen
Bedienung Deiner Snap
ES
Qué hay en la caja
Conozca su Snap
Usando su Snap
PT
O que há dentro da caixa
Conheça a sua Snap
Usar a sua Snap
4
5
9
18
19
23
34
35
39
50
51
55
66
67
71
82
83
87
Overview

4 | EN EN | 5
What’s in the Box
1. Flash
2. Lens with
Magnetic Cap
3. Print Slot
Get to Know Your Polaroid Snap™
10
10
32
1
Camera Strap
Polaroid Snap™Instant Print Camera Micro USB Cable

6 | EN EN | 7
4. MicroSD Card Slot
5. Wrist Strap Anchor
6. Micro USB Connector
7. Battery Status LED
8. Paper Status LED
9. MicroSD Card
Status LED
10. Paper Door Latch
11. Polaroid Border
Selector
12. Color Mode Selector
13. Pop-Up Viewfinder/
Power Switch
14. Shutter Button
15. Self-Timer
10
4
5
6 10
7
8
9
Back View Top View
11 13
15
12 14
10

8 | EN EN | 9
Turning On
Your On/Off switch is your viewfinder. To
turn on your Snap, gently press the power
icon on the viewfinder. Your viewfinder will
pop up and your camera will turn on.
Turning Off
Use slight pressure to push the viewfinder
back to a closed position. Your camera is
now off.
Restarting
To manually restart (in case of the camera
freezing or other issues), first insert the end
of a paperclip or other small, pointed item
into the pinhole next to the micro USB slot.
Apply gentle pressure until the camera turns
off. Close and open the viewfinder to turn
the camera back on.
Taking Photos
Is the lens cap off? Good! Press and release
the shutter button and voila!You’ve taken
a photo.
Using Your Snap
Turning On
Turning Off
Restarting
Taking Photos
Printing
Inserting Photo Paper
Refilling Photo Paper
Paper Do’s & Don’ts
Memory
Inserting an SD Card
Removing an SD Card
SD Card Memory
Transferring Files
Via USB Cable
Via SD Card
Battery & Charging
Auto Sleep
Self-Timer
Adding Effects
Photo Frames
Color Tints
Photo Booth
Precautions & Safety Tips
Table of Contents
9
9
9
9
10
10
11
11
11
11
12
12
12
12
12
13
13
13
13
13
14
14
14

10 | EN EN | 11
Refilling Photo Paper
When the last ZINK Paper™is used, the LED
next to the paper icon on the back of your
Snap will glow red.You can now safely reload
printing paper into your camera.
Paper Do’s & Don’ts
– Do not add more paper if the paper
compartment is not completely empty.
– Do not fill the paper compartment with
more than one 10-pack of Premium
ZINK Paper™ . Filling over 10 sheets can
damage the printer.
– Do avoid bending the ZINK Paper™ .
– Do hold the paper by its edges. Avoid
touching the surface with your fingers.
If there is a paper jam, if you insert the
wrong type of paper, or there is some other
printing/paper related error, all indicators
will blink red. Open your camera and correct
the error (clear jam, replace paper, etc.) then
restart your camera.
Memory
Your Snap is built with enough memory to
capture and print one 5MP image at a time.
Inserting an SD Card
Your Snap comes with an SD Card slot for
Your camera will automatically flash and auto
focus for every photo. A lens cap has been
included to keep your lens clean and scratch-
free. Don’t forget to use it!
Printing
The Snap camera instantly prints every photo
for you when ZINK Paper™is loaded.
Inserting Photo Paper
1. Slide the latch on the paper tray and open
the door.
2. Slide the entire pack of ZINK Paper™
into the paper tray.
– Make sure the ZINK Smart Sheet™
is placed and loaded with the bar code
face down.
– Shiny side of paper faces up.
3. Close the paper tray door.
The ZINK Smart Sheet™will eject when you
take a picture, then your photo will print.
For bright, sharp instant photos that come
out dry to the touch and ready to peel and
stick, we recommend Polaroid Premium
ZINK Paper™ .

12 | EN EN | 13
Battery & Charging
When the battery power dips below 10%
the battery LED will glow red. At 2% power,
your camera will automatically shut down.
To charge your Snap, plug it into either a
wall outlet or computer, using the included
micro USB cable. The battery LED will blink
red until the battery is fully charged.
Auto Sleep
To help save battery power, your Snap
will automatically go into sleep mode
after several minutes of no use. To turn
your camera back on, close and re-open
the viewfinder.
Self-Timer
Your Snap comes with a ten-second
self-timer. To set it, press the timer button
(located on the top of the camera), then
press the shutter button. The timer button
will blink white while the timer counts
down and in ten seconds, your photo will
be captured.
Adding Effects
Photo Frames
– To add a Polaroid border to your print,
press the frame button located on top of
your camera.
images that you’d like to save, as well as
print. To insert a memory card, gently push
the SD card into the slot on the side of
your camera.You’ll feel a slight click when
the card is fully inserted and the SD LED
will glow white. Use cards with up to
32GB max capacity.
Removing an SD Card
Give a light push to the top of the card
and the SD card will pop out. Pull to fully
remove from your Snap.
SD Card Memory Indicator
When the memory on your SD card dips
below 1GB the LED on the back of your
Snap will glow red.When the memory
reaches zero, or if there is an error reading
the SD card, the LED will blink red.
Transferring Files
Via USB Cable
– Using the included micro USB cable,
connect your Snap to a computer. Double-
click the SD card when it appears on your
computer desktop to view and save your
images to a photo roll or other location.
Via SD Card
– Remove the SD card per the directions
above then insert the card into your
card reader.

14 | EN EN | 15
Adult supervision is recommended when the
product is being operated by young children.
Do not use the camera while you are
walking, driving or riding a motorcycle.
This may result in you having an accident.
For optimal performance, use your Snap
in temperatures between 60°F and 90°F
(15.6°C and 32.2°C) and between 20% to
80% relative humidity.
Do not use the camera near sand as this
may damage the camera.
Do not fire the flash close to anyone’s eyes.
This may cause damage to the person’s
eyesight.
This camera is a precision instrument. Do
not drop, strike or use excessive force when
handling the camera.
Do not use the camera in humid, steamy,
smoky or dusty places. This may cause fire
or electric shock.
Use the camera in a well-ventilated area. Do
not wrap the camera or place it in cloth or
blankets.This may cause heat to build up and
deform the case, resulting in personal injury.
Color Tints
– To give your print a sepia or black and white
treatment, press the color button (located
on the top of your camera) to select the
color tint for your next print.
Photo Booth
– To take photos with a photo booth effect,
press and hold the shutter button for three
seconds. The timer button will blink and
the camera will take four photos in a row,
capturing a photo every four seconds.The
photos will print on one sheet with these
four consecutive images.
Precautions & Safety Tips
Turn the power off if:
– Foreign objects or water enter the camera
– The camera has been dropped or its case
has been damaged
Continued use after these issues may cause
personal injury.
Service should only be performed by a
qualified technician.
This camera isn’t waterproof. It’s not water-
resistant, either, so use caution when using
near water.
Do not place the camera on unstable surfaces.

16 | EN EN | 17
– Do not disassemble the Snap camera or
remove the battery at any time. The battery
is not designed to be removed from the
camera, nor charged outside the camera.
Disclaimer
During extended use, your Polaroid Snap
camera may feel warm to the touch. This
is a normal operating occurrence and does
not indicate any product defect or reason
to slow down the fun.
That’s it!
Have questions? Need technical support?
Want to know more? Get in touch at:
[email protected]
www.polaroidsnapcamera.com
Do not leave the camera in places where the
temperature may rise significantly, such as
the inside of a car.This may adversely affect
the performance of the product.
Before moving the camera, disconnect
all cords and cables. Failure to do this may
damage cords and cables, resulting in
personal injury or damage to the product.
Notes on Battery Usage
Carefully read and strictly observe the safety
instructions and the notes described below:
– Use only the included, non-removable
battery (7.4V).
– Avoid extremely cold environments as low
temperatures can shorten the battery life
and reduce camera performance.
– When you are using a Polaroid Snap
that has not been used for an extended
period of time, it may affect the battery
life and the number of images that can
be captured. To maximize its battery
performance and lifetime, we recommend
that you fully charge the battery and
discharge it for at least one complete cycle
before use.
– Properly dispose of the battery when
disposing of the camera.

18 | FR FR | 19
Que trouve-t-on dans la boîte
10
Dragonne
Appareil photo avec impression instantanéea
Polaroid Snap™Câble micro USB
1. Flash
2. Lentille avec
cache magnétique
3. Fente d’impression
Découvrez votre Polaroid Snap™
10
32
1