Polk Mono Magnifi soundbar User manual

o
polk
. Register your new polk product online now
for a chance to win $500
of
polk product!
www.polkaudio.com/registration/
Benefits
•
Permanent
record
of
your
purchase,
in
case
you
misplace
your
original
receipt.
•
Enters
you
in
our
monthly
FREE
drawing
for
$500-worth
of
Polk
speakers.
•
Allows
you
to
enroll
in
Club
Polk
Benefits:
-
Informat
i
ve
Po
lk
Website
Forums
,
-
Special
discounts
in
the
Polk
Web
Store
,
-
Advance
notice
of
Polk
Promos
-
Discounts
on
Author
i
zed
Polk
parts
.
-
Stay
up
to
date
when
there
is
news
and
announcements
about
your
product.
No
Internet
access?
Call
Polk
Customer
Service
800
-
377-7655
(US
&
Canada
only).
Outside
the
US
&
Canada,
call410-358-3600.
We
'
ll
walk
you
through
the
simple
registration
process!
We
take
yo
ur
pn
vacy
senous
ly.
Po
lk
does
not
share
or
sell
informa
ti
on
to
any
other
parties
,
un
l
ess
directed
by
court
order.
Registering
your
product
has
no
effect
on
your
warranty
.
Warranties
apply
as
stated
in
your
tmportant
product
information
guide
.
Please
be
sure
to
keep
your
anginal
purchase
receipt.
Questions?
Concerns?
Contact
Polk
Customer
Service
9am
-5:
30pm
,
M-F
,
EST(
U
SA)
800-377-7655
US
&
Canada
only
1410
-
358-3600
outside
US
&
Canada
I
polkcs@
polkaudio.com
MAGNIFI
SOUNDBAR
SYS
~,.,...
FRAN<;IAS
Enregistrez
votre
nouveau
produit
Polk
en
ligne
maintenant
et
courez
Ia
chance
de
gagner
po
ur
500
$
de
produits
Polk
.
www.po
l
kaudio.co
m
/reg
ist
ra
t
ion/
A
vantages
• Cree une attestation permanente de votre achat
en
cas de perte de
votre
re9u
original.
•
Vous
inscrit GRAT
UI
TEMENT a
notretirage mensuel de haut-
parleurs Polk d'une valeur de 500
:ll.
•
Vous
permet de vous
enr61er
dans le Club Polk et
de
-
participer
a
des
forums
informatifs
sur
le
site
web
de
Polk
,
-
profiter
de
rabais
speciaux
au
magasin
Polk
Web
Store
en
hgne
,
-
obtemr
des
preavis
des
promotions
Polk
,
-
benef
t
cier
de
rabais
sur
les
pieces
autorisees
Polk
Audio
,
-
ecevoir
les
t
outes
derme
r
es
informations
concernant
votre
produ
i
t.
Pas
d'acces
a
!'in
t
ernet?
Contactez
le
Service
a
Ia
clientele
de
Polk
Audio
au
800
.
377.7655
(E.-U.
et
Canada
seuleme
n
t).
A
l'exterieur
des
E.-u.
et
du
Canada
,
signalez
le
410.358.3600
.
Nous
nous
ferons
un
plals1r
de
vo
us
aider
a
enregistrer
votre
produit
.
Votre
conlidenbahte
nous
bent
a
creur.
Polk
Audio
ne
partagera
m
nP.
vendra
votre
information
a
tOU1e
autre
pRrtie
saul
par
ordonnance
JUdlcia1re
.
l.'enreg1strement
de
votre
produ
1tn'a
aucun
effet
sur
votre
garantie
Les
garanties
sont
valides
telles
que
decrites
dans
votre
manuel
d'utihsaUon.
Assurez-vous
de
conserver
votre
recu
ongmal
.
QuestiOns?
Souc1s?
COntactez
le
Service
a
Ia
clientele
de
Polk
Audio
,
de
9h
a
18h
HNE
(t
U.)
au
800.377.7655
(E
·U
.
et
Canada
seulement
).A
l'ext!Jrieur
des
E
.·
U.
et
du
Canada
,
signalez
le
410
.
358
3600
I
[email protected]
ESPANOL
Registre
su
nuevo
producto
Polk
en
linea
e
incluiremos
su
nombre
en
un
sorteo
para
ga
n
ar
$500
en
prod
uctos
Polk.
www.polkaudio
.
com/regist
r
ation/
Beneficios
• Registro perrnanente de
su
compra porsi pierde
su
recibo original.
• Participaci6n
_gratis
en
nuestro sorteo mensual de $500 en
altavoces
PolK'
.
• lnscripci6n en
el
Club Polk, con derecho
a:
-
Foros
informativos
d
el
sitio
Web
de
Polk
-
Descuentos
es
p
ec
ial
es
en
Ia
tienda
Web
de
Polk
-
Av
t
so
por
ad
elan
t
ado
de
promociones
de
Po
lk
-
Descuento
en
repues
t
os
autorizados
de
Polk
.
-
Mantengase
al
dfa
en
cu
an
toa
noticias
y
anuncios
sab
re
su
producto.
i,NO
tlene
acceso
aI
nternet?
comunlquese
co
n
el
Serv~e1o
al
cllente
de
Polk
l
lam
a
ndo
at
800-377-
7655
(solo
en
EE.UU
.y
Canada).
Fuera
de
EE.UU
y
Canada
,
name
ai41Q-358-3600
.
Lo
guiaremos
por
el
s1
mp
le
proceso
de
mscripci6n
.
Tomamos
en
seno
su
pnvacldad
Polk
no
intcrcambia
ni
vende
informaciOn
a
terceras
partes
excepto
por
orden
de
los
tribunales.
lnscnbir
su
producto
no
uene
mngun
efecto
en
Ia
garantia
Las
garantias
se
aptican
como
se
indica
en
el
manual
del
producto.
Conserve
el
original
del
reclbo
de
compra
i,Preguntas?
,lllQIJII!tudes?
COmuniquese
con
el
Servldo
alzchentc
de
Polk
llanando
aiB00-377-7655
.
de
tunes
a
v1ernes
.
de
9:00
de
Ia
manana
a
5:30
de
Ia
tarde
,
hora
del
Este
(solo
en
EE
UU
.
y
Canada
).
Fuera
de
EE.UU.
y
Canada
,
llame
al410·358
-
3600
I
polkcs@polkaudio
com

What's in
the
box
0
c
_____________
~c~J~-----------~
e
polk
1.
Sound bar
2.
Subwoofer
e
m:::l
I
C
•)
I
I
C"bD
G
0
e
ED~<·
~~~·b
I..__
_
____Jr~
:§~~~
·o=
t=
0
0
\~
(J){j)@
eee
808
•
fl
polk
5.
Subwoofer power cable
3.
6' analog stereo cable (3.5mm)
6.
Sound bar power cable/power
supply
4.
6'
optical cable 7. Remote control (battery included)
Important Note
If anything
is
missing or damaged, or if your MagniFi soundbar fails
to
operate,
please notify your dealer immediately. We recommend keeping your original
carton and packing materials
in
case you need to ship the unit
in
the future.
for more information visit ourwebsite at www.polkaudio.com 3

Connecting your MagniFi soundbar
to
your
TV
We recommend connecting the optical audio output
of
your
1V
to
the optical
input on the back
of
the
bar.
This will provide the highest quality audio
regardless
of
whether you're watching
1V
or watching your favorite
DVD.
If
your
1V
does not have
an
optical output, you can use the optical output from
your DVD player
or
your cable/satellite box
to
connect
to
the optical input on
the
bar.
Then simply use the other bar input for your other audio sources.
c
___
8
______
~i--~~~\
_______
8
___
J
OPTIN
IOl@oo
~
0
~
~
1VOPTOUT
J
.----'
4

How to Connect Your Subwoofer
Your subwoofer receives a wireless audio signal from the bar. All you need to
do is plug in the power cord and make sure the main power switch is ON.
~ c-=_-_-_-_-_-_-_-_-_-_-_- _- ~c::====J~~~=========-v___,
Syncing The Bar And Wireless Subwoofer
The MagniFi Soundbar and wireless
subwoofer are preset at the factory
to
~
~------------~
work together. Should your wireless
subwoofer stop receiving an audio signal,
follow these instructions
to re-establish the
connection:*
1. Turn offthe subwoofer's AC Mains switch.
2. Press the SYNC button on the back of the bar and hold for
three
(3) seconds.
polk
3. The LED on the back of the bar will blink, indicating that the bar and the
subwoofer are ready
to be connected.
4. Turn on the subwoofer's AC Mains switch. When the subwoofer LED turns
solid green, the bar and subwoofer are connected and ready
to use.
* Note: If your bar is mounted to the wall, it will need to be remov ed f or this proced ure
for more information visit our website at
www .polkaudio.com 5

Remote Control
1.
~Power
2.
.Kf
Mute
3.
Source
1,
2,
Bluetooth®
(*)
4. Master Volume Up and Down (
+
I-)
6
5.
Voice Volume Up and Down (
+
I-)
6.
Bass Volume Up and Down (
+
I-)
7.
Movie/Music Select
MagniFi soundbar Button Controls
,.
\...
~
+
VOLUME
+
+ +
-®
VOLUME
VOICE
--
Power On:
Standby mode.
Source:
Access learning
mode
to
select with the remote.
Volume:
Increase/Decrease
voiCE
Voice Adjust:
Increase/Decrease
+
BASS
polk
+
J<r
*
BASS
-
Bass:
Increase/Decrease
Mute
Bluetooth:
Pairs and connects
with a Bluetooth
Device
\
./

LED User Interface
(visit www.polkaudio.com fora more expansive LED section
in
the manual)
c
_________
o_•o-oo_o_o~(==)~-----------~
Seven LEOs behind the sound bar grille communicate which source has been
selected (including Movie and Music modes), power state, master, voice and
bass volumes, mute status, Dolby Digital detection and learning mode.
VoiceAdjust Technology
Your MagniFi Soundbar has a dedicated center channel, which you control
from either the bar
or
the remote control. By controlling the volume of
the center channel, you can fine tune
all
dialogue
to
be more intelligible.
Bluetooth
®
Wireless Technology
(visit www.polkaudio.com for a more expansive Bluetooth section
in
the manual)
To
start using the Bluetooth source you must first pair your device with the
bar.
Pairing enables your Bluetooth device
to
connect with your sound bar
wirelessly.
You
only have to pair your sound bar with your Bluetooth device
one time for this exchange
of
information
to
take place. After that you simply
select "Polk MagniFi" from your device list
to
make the connection
to
your
sound
bar.
The sound bar can hold 8 Bluetooth devices
in
its memory. If
more than 7 devices pair after yours, your device could be dropped from the
memory list.
The Polk MagniFi
is
equipped with NFC (Near Field Communication) located
to
the right
of
the buttons, which gives you the convenience
of
simply
touching your Bluetooth device
to
pair and connect.
for more information visit
our
website at www.polkaudio.com 7

8
IR
Remote
Learning
For your sound bar
to
respond to your remote control, you MUST FIRST
program the bar to respond
to
your television's originaiiR (Infra-Red) remote.
An
RF
(Radio Frequency) remote will not work. Other remotes (cable, satellite)
will work only after you have programmed the bar
to
respond
to
the TV's
IR
remote.
Note: If
your
bar
fails to learn certain IR remote codes, the LED will blinkred. LED's then exit the learn
mode
afterattempting to connect. Carefully repeat steps 1-3 below.
Enter Learn mode
by
pressing
and
holding
the source button for
3 seconds.
-~--------------~>
Press the volume Corresponding function should
be
up button. pressed repeatedly,
and
4 LED's will flash
immediately aftereach press. LED's will
flash white 3 times within 1second then
holdsolid for 2 seconds for succ
ess.
Code Erasing Procedure: If you have programmed your Sound bar
to
respond
to
a remote control and you no longer want it to
do
so, erase the
codes by pressing the SOURCE key for about 10 seconds while the unit
is
in
standby mode (LED's will flash fast, alternating amber/white 3 times per
second for 2 seconds). When sequence is complete you'
II
know that previously
learned codes have been successfully erased.

Remote Battery Replacement
8
Insert and press a pin into the hole,
then press and push the battery
cover outward
to
open.
Glnstall a new CR2032 battery
following the correct orientation
(follow the (
+)
(-)
signs on the remote control)
8 Slide back the battery cover
Technical Assistance
Thank you for your Polk purchase. If you have a question or comment,
please feel free
to
call us or email us.
In
North America, call Polk
Customer Service 800-377-7655
(M
-
F,
9:00 AM-5:30 PM
EST)
or via
email [email protected]. Outside the
US,
call
+
1-410-358-3600.
Contact Us Directly
Polk
I
5601 Metro Drive Baltimore, MD 21215
I
800-377-7655
www.polkaudio.com
The complete owner's manual can be found online at
www.polkaudio.com
for more information visit our website at www.polkaudio.com
9

magnifi sound bar
Voice-optimizing Wireless Sound Bar System
Important Product Information

2
Safety Precautions
FCC Statement
1. This device complies with Part 15 of the
FCC Rules. Operation
is subject to the
following
two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
CAUTION: Any changes or modifications not expressly
approved by the grantee
of this device
could void the user's authority
to operate
the equipment.
Federal Communitcations Commission
Interference Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to
part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference
in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used
in accordance with the
instructions, may cause harmful interference
to radio
communications. However, there
is no guarantee that
interference will not occur
in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user
is encouraged
to try to correct the interference by one or more of the
following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment
and receiver.
(3) Connect the equipment into an outlet on a
circuit different from that
to which the receiver is
connected.
(4) Consult the dealer or an experienced radio/TV
technician for help.
RF Exposure Warning
This equipment must be installed and operated
in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed
to
provide a separation distance of at least 20 em from all
persons
and must not be co-located or operating
in conjunction
with any other antenna or transmitter. End-users and
installers must be provide with antenna installation
instructions and transmitter operating conditions for
satisfying
RF exposure compliance.
SGHz RF Device Statement
5.15-5.25MHz Band
• This device
is operation in 5.15 -5.25GHz frequency
range, then restricted
in indoor use only,
• Outdoor operations in the 5150-5250MHz is
prohibit.
Master Equipment:
The availability of some specific channels and/or
operational frequency bands are country dependent
and are firmware programmed at factory
to match
the intended destination. The firmware setting
is not
accessible by the end
user.
This device is Master equipment, the transmission is
disabled in the 5600-5650MHz band.
Slave Equipment:
This device is slave equipment, the device is not radar
detection and not ad-hoc operation
in the DFS band.
FCC RF Warning
This equipment must be installed and operated
in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed
to
provide a separation distance of at least 20 em from all
persons
and must not be co-located
or operating in conjunction
with any other antenna
or transmitter. End-users and
installers must be provide with antenna installation

instructions and transmitter operating conditions for
satisfying RF exposure compliance.
IC Warning
This device complies with Industry Canada
License-exempt RSS standard(s). Operation
is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference, including
interference
that may cause undesired operation of
the device. Changes or modifications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment. The battery
or batteries shall not be
exposed to excessive heat such as sunshine, fire or
the like.
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada
licence-exempt RSS standard(s).
Operation is subject
to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including
interference
that may cause undesired operation of
the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below
the Industry Canada (IC) radio frequency exposure limits.
The Wireless Device should
be used in such a manner
such that the potential for human contact during normal
operation is minimized.
This device has also been evaluated
and shown compliant
with the IC RF Exposure limits under mobile exposure
conditions. (antennas are greater than
20cm from a
person's body).
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3.
Heed all warnings.
4. Follow all instructions.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Do not use this apparatus near water.
Clean only with
dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized
or grounding plug. A polarized plug has two blades
with one wider than the other. A grounding plug has
two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If
the provided plug
does not fit into your outlet, consult
an electrician
for replacement of the obsolete outlet.
Protect the
power cord from being walked on or
pinched particularly at the plugs, convenience
receptacles,
and at the point where they exit from the
apparatus.
DO NOT overload wall outlets or extension cords
beyond their rated capacity as this can cause electric
shock or fire.
This
equipment is a Class II or double
insulated electrical appliance. It has I0 I
been designed in such a way that it
does not require a safety connection
to electrical earth. (for wireless subwoofer unit).
Correct Disposal
of this product. This
marking indicates
that this product )t
should not be disposed with other
household wastes throughout the
EU. To prevent possible harm to the -
environment
or human health from
uncontrolled
waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources.
To return your used device, please use the return and
collection systems or contact the retailer where the
product was purchased. They can take this product
for environmental safe recycling.
3

4
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
Only use attachments/accessories specified
by the manufacturer.
Use only with the cart, stand, tripod,
bracket,
or
table specified by the
manufacturer, or sold with the
apparatus. When a cart or rack
is
used, use caution when moving the
cart/apparatus combination to avoid
injury from tip-over.
Unplug the apparatus during lightning storms
or
when unused for long periods of time.
Refer
all
servicing
to
qualified personnel. Servicing
is
required when the apparatus has been damaged
in
any
way,
such as when power supply cord or
plug
is
damaged, liquid has been spilled
or
objects
have fallen into the apparatus,
or
apparatus has
been exposed
to
rain
or
moisture, does not operate
normally, or has been dropped.
The equipment shall be used at maximum 35
degree C ambient temperature
Do not open the equipment
to
reduce the risk of
electrical shock. For safety reasons it
is
only allow
to the opened by qualified service personnel.
WARNING:
To
reduce the risk
of
fire or electric
shock,
do
not expose this apparatus
to
rain
or moisture. And the apparatus shall not be
exposed
to
dripping
or
splashing and that no
objects filled with liquids, such as vases, shall
be placed on the apparatus.
The AC inlet is used as the disconnect device
and shall remain readily operable.
The product shall be used on open bench.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
WARNING:
To
prevent injury, this apparatus must
be securely attached
to
the floor/wall
in
accordance
with the installation instruction.
WARNING: DO NOT INGEST BATIERY, CHEMICAL
BURN HAZARD
a.
The remote control supplied with this product contains
a coin/button cell battery.
If
the coin/ button cell battery
is
swallowed, it can cause severe internal burns
in
just
2 hours and can lead
to
death.
b.
Keep new and used batteries away from children.
A
~CAUTION
J
A.
ATTENTION!
RISQUE
DE
CHOC!
£LECTRIOUE
PAS
OUVRIR!
A
The lightning flash with arrowhead symbol,
w~hin
an
equilateral
triangle, is intended to alert the user to the presence
of
uninsulated dangerous voltage
w~hin
the product' s enclosure
that may
be
of
sufficient magnitude to constitute a risk
of
electric shock to persons.
•
The exclamation point within an equilateral triangle is intended
to alert
the
user
to
the presence of important operating and
maintenance (servicing) instructions in
the
l~erature
accompanying
the
appliance.
If the battery compartment does not close securely, stop
using the product and keep it away from children.
c.
If you think batteries might have been swallowed
or
placed inside any part of the body, seek immediate
medical attention.
CAUTION: Danger
of
explosion if battery
is
incorrectly
replaced. Replace only with the same
or
equivalent type.
EU Compliance Information
Eligible
to
bear the CE mark; Conforms
to
European
Union LowVoltage Directive 2006/95/EC; European Union
EMC Directive 2004/108/EC; European Union Restriction
of Hazardous Substances Recast (RoHS2) Directive
2011 /65/EC; European Union WEEE Directive
2002/96/
EC;
European Union Eco-Design Directive 2009/125/EC;
European Union Registration, Evaluation,
Authorization and Restriction of Chemicals (REACH)
Directive 2006/121/EC; European Union Radio and
Telecommunications Terminal Equipment (R&TIE)
Directive 1999/5/EC.
This product contains batteries that are covered under
the 2006/66/EC European Directive, which cannot be
disposed of with normal household waste. Please follow
local regulations.
You
may obtain a free
copy
of the Declaration of
Conformity by contacting your dealer, distributor, or Polk's
worldwide headquarters. Contact information can be
found here: www.polkaudio.com

Limited Warranty
Polk Audio, LLC., warrants to the original retail purchaser
only.
This warranty will terminate automatically prior to
its stated expiration if the original retail purchaser sells
or transfers the Product to any other party. Polk Audio,
Inc., warrants, to the original retail purchaser
only,
that the LOUDSPEAKER(S), PASSIVE CROSSOVER
COMPONENT(S) and ENCLOSURE on this Polk Audio
Loudspeaker Product will be free from defects
in
material
and workmanship for a period of three
(3)
years from
the date of original retail purchase from a Polk Audio
Authorized Dealer. Furthermore, Polk Audio, LLC.,
warrants, to the original retail purchaser
only,
that any
AMPLIFIER OR OTHER ELECTRONIC COMPONENT that
may be included
in
this Polk Audio Loudspeaker Product
will be free from defects
in
material and workmanship
for a period
of
one
(1)
year from the date of original retail
purchase from a Polk Audio Authorized Dealer.
To
allow
Polk to offer the best possible warranty service, please
register your new product online at:
www
.polkaudio.com/
registration or call Polk Customer Service at 800-377-
7655
in
the USA and Canada (outside the USA: +
1-410-
358-3600) within ten
(1
0)
days of the date of original
purchase. Be sure to keep your original purchase receipt.
Defective Products must be shipped, together with proof
of purchase, prepaid insured to the Polk Audio Authorized
Dealer from whom you purchased the Product, or to the
Factory at
1
Viper
Way,
Vista, California 92081. Products
must be shipped
in
the original shipping container or
its equivalent;
in
any case the risk
of
loss or damage
in
transit
is
to be borne by you.
If
upon examination at the
Factory or Polk Audio Authorized Dealer it
is
determined
that the unit was defective
in
materials or workmanship
at any time during this Warranty period, Polk Audio or the
Polk Audio Authorized Dealer will, at its option, repair or
replace this Product at no additional charge, except as
set forth below.
All
replaced parts and Products become
the property
of
Polk Audio. Products replaced or repaired
under this warranty will be returned to you, within a
reasonable time, freight prepaid. This warranty does not
include service or parts to repair damage caused by
accident, disaster, misuse, abuse, negligence, inadequate
packing or shipping procedures, commercial use, voltage
inputs
in
excess of the rated maximum
of
the unit,
cosmetic appearance of cabinetry not directly attributable
to
defect
in
materials or workmanship, or service, repair,
or modification of the Product which has not been
authorized or approved by Polk Audio. This warranty
shall terminate if the serial number on the Product has
been removed, tampered with or defaced. This warranty
is
in
lieu of
all
other expressed Warranties. If this Product
is
defective
in
materials or workmanship as warranted
above, your sole remedy shall be repair or replacement
as provided above.
In
no event will Polk Audio, Inc. be
liable
to
you for any incidental or consequential damages
arising out of the use or inability to use the Product, even
if Polk Audio, Inc., or a Polk Audio Authorized
Dealer,
has
been advised of the possibility of such damages, or for
any claim by any other party. Some states
do
not allow
the exclusion or limitation of consequential damages, so
the above limitation and exclusion may not apply to you.
All
implied warranties on this Product are limited to the
duration of this expressed Warranty. Some states
do
not
allow limitation on
how
long
an
implied Warranty lasts, so
the above limitations may not apply to you. This Warranty
gives you specific legal rights, and you
also may have other rights which vary from state to state.
This Warranty applies only
to
Products purchased
in
the
United States of America, its possessions, and U.S. and
NATO armed forces exchanges and audio clubs.The
Warranty terms and conditions applicable to Products
purchased
in
other countries are available from the Polk
Audio Authorized Distributors
in
such countries.
Official Company information:
Polk Audio
is
a
DEl
Holdings, Inc. Company. Polk Audio
and Polk are registered trademarks of Polk Audio, LLC.
MagniFi and VoiceAdjust are trademarks of Polk Audio
Inc. The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Polk Audio
is
under license. Other
trademarks and trade names are those of their respective
owners. The "aptX® software
is
copyright CSR pic or its
group companies.
All
rights reserved. The aptX®mark
and the aptX logo are trademarks of CSR pic or one of its
group companies and may be registered
in
one or more
jurisdictions." 5601 Metro Drive Baltimore, MD 21215
800-377-7655
www.polkaudio.com
5

6
A
Note
Regarding Wireless Performance:
Like
all
wireless devices, your MagniFi Soundbar may be susceptible to
RF
interference from such sources as
microwave ovens, WiFi computer systems, video game systems, cordless telephones, blue tooth systems, baby
monitors and other devices.
In
particular, any devices operating
in
the 2.4GHz band may cause intermittent wireless
connections between the sound bar and the subwoofer.
It
is
also possible that your sound bar system may affect other
wireless systems. For the most part, you can avoid wireless performance problems by physically separating these
devices from your sound bar System. Maintaining a distance of several feet or more between your sound bar and any
wireless device should prevent any mutual interference effects. If you
do
notice any subwoofer signal dropouts take
care
to
identify the root cause (most commonly having other wireless devices too close) and resolve accordingly. Any
interference effects from a microwave oven will cease once the oven stops operating and may be resolved on a long-
term basis by increasing the physical distance between your sound bar system and the microwave oven.
WARNING: LISTEN CAREFULLY
Polk Audio loudspeakers and subwoofers are capable of playing at extremely high volume levels, which could cause
serious or permanent hearing damage. Polk Audio, LLC accepts no liability for hearing loss, bodily injury or property
damage resulting from the misuse
of
its products. Keep these guidelines
in
mind and always use your own good
judgment when controlling volume:
•
You
should limit prolonged exposure to volumes that exceed 85 decibels(dB).Refer to the Occupational Health and
Safety Administration (OSHA) guidelines at: www.osha.gov/SLTC/noisehearingconservation/index.html

Troubleshooting
The bar does not power on.
• Ensure you have plugged the power supply into a live wall outlet.
• Ensure that
all
components of the power supply are connected properly.
• Ensure the power supply
is
properly connected to the bar power input.
No sound from the
bar.
• Check that the TV or cable box
is
providing a signal.
•
If
necessary, check using an alternate source.
• Check that the bar
is
receiving power and
is
turned on.
• Turn up the volume of the
bar.
• Check the input cables to make sure they are connected securely.
• Turn up the volume of your television or cable box.
• Check mute status:
Is
the bar status light slowly blinking green?
If
so, press the Mute button on the
bar.
The sound coming from the bar
is
distorted.
•
Try
turning down the volume of your audio source,
if
possible.
• Audio processing (see online
manual)-
there may be audio processing occurring prior to reaching
the
bar.
Disable this processing.
The included remote control won't work.
• Ensure the battery's protective plastic tab has
been removed.
• Replace the battery (CR2032).
The bar won't learn my remote control commands.
• Carefully follow the programming instructions
in
the online manual.
• Hold the remote steady and 1-2 feet from the front of the
bar.
• Quickly "tap" the button on your existing remote until the status
LED
blinks green.
Note: The bar learns almost
aiiiR
commands, but some
IR
protocols cannot be programmed.
The volume of my television speakers gets louder than my MagniFi Soundbar system over
time.
• Turn off your
TV
speakers per the instructions
in
the online manual.
• When the remote control volume button
is
held down, your television may change volume levels
faster than the
bar.
Use the buttons on the bar to adjust the volume of the bar to the correct balance
with the TV speakers.
7

opolk.
5601 Metro Drive
Baltimore, MD 21215
800-377-7655
www.polkaudio.com