Polycom KIRK 600v3 User manual

Call Hold
Call Transfer
User Guide
Polycom®KIRK Wireless Server 600v3
(SIP Protocol)
1416 8711, ed. 1

ii
Copyright © Polycom, Inc.
All Rights Reserved
Catalog No.1416 8711
Version 1
Proprietary and Confidential
The information contained herein is the sole intellectual property of Polycom, Inc. No distribution,
reproduction or unauthorized use of these materials is permitted without the expressed written consent of
Polycom, Inc. Information contained herein is subject to change without notice and does not represent
commitment of any type on the part of Polycom, Inc. Polycom and Accord are registered trademarks of
Polycom, Inc.
Notice
While reasonable effort was made to ensure that the information in this document was complete and
accurate at the time of printing, Polycom, Inc., cannot assume responsibility for any errors. Changes and/or
corrections to the information contained in this document may be incorporated into future issues.

Contents
11
1 Call Hold and Call Transfer
Call Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1
Call Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1
Call transfer - attended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2
Call transfer - semi-attended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2
Call transfer - blind . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2

12

1–1
1
Call Hold and Call Transfer
This guide describes how put a call on hold and how to transfer a call on your
handset when operating on a SIP call handler and when supported on KIRK
Wireless Server 600v3.
The guide is intended for end users and provides information about activating
call hold and call transfer on your handset specific for your call handler.
Contact your system administrator for informaton about your call handler and
wireless server.
For more information about the handset in general, refer to the Handset User
Guide.
This section includes information about activating:
•“Call Hold” on page 1-1
•“Call Transfer” on page 1-1
Call Hold
Use this feature to hold a call. A call may be placed on hold, in which case the
connection is not terminated but no verbal communication is possible until the
call is removed from hold.
On your handset, do the following:
•While on call, press R. The call is now on hold.
Call Transfer
Use this feature to transfer a call to another handset by dialing a new
number/extension. The transferred call can be either attended, semi-attended
or blind. If the transferred call is attended, the desired number/extension is
notified of the impending transfer (the caller is put on hold). If the transferred

1–2
call is semi-attended, the person transferring the call hangs up after hearing a
ring tone. If the transferred call is blind, the desired number/extension is not
notified of the impending transfer.
Call transfer - attended
You (B) receive a call from A, who wants to speak with C. On your handset, do
the following:
1While on call, press R, and dial the number or extension of C. A is put on
hold, and C answers the call.
2Press and the call is now transferred to C.
Call transfer - semi-attended
You (B) receive a call from A, who wants to speak with C. On your handset, do
the following:
1While on call, press R, and dial the number or extension of C.
2After hearing a ring tone, you press and thereafter C answers the
call. The call is now transferred to C.
Call transfer - blind
You (B) receive a call from A, who wants to speak with C. On your handset, do
the following:
1While on call, press R, and dial the number or extension of C.
2Press and the call is now transferred to C, i.e you hang up before
hearing a ring tone. Thereafter C answers the call.