Polygroup Evergreen Classics TG76P4A73D06 User manual

* Electrical Rating For The Tree
Input: 120V, 60Hz, 0.25A
Output: DC 29V, 0.45A
CAUTION! For indoor use only
2. Each tree section is numbered with a sticker. Identify all sections before assembling.
3. Assemble the tree from the bottom to the top (see Fig. B). Open the protective cap on the lower pole, then insert the upper pole
until firmly secured.
* It is easier to check the pole connectivity and shape the branches, section by section.
4. For pre-lit trees, plug the power cord/adapter into the wall outlet.Tree Section 1 should be lit instantly. If it is not, or if some bulbs
do not light or begin to flicker, see TROUBLESHOOTING TIPS to fix it before moving on to the upper section.
5. For shaping, allow branches to fall into place or gently pull upwards and outwards; make sure
that all wires are free of branch hinges. Always start with the lowest tips closest to the pole;
pull the individual tips alternately upwards and outwards (see Fig. C) and work your way to
the tip of the branch. Continue to work row by row until the top row of the section is shaped.
6. Repeat Step 3-5 until the tree top is installed.Your tree is now ready to be decorated.
Light
Controller
Fig. B - Tree and Light Assembly
1. Find a flat, level surface near an electrical outlet and assemble the tree stand as shown in Fig. A.
Thank you for purchasing your Smart Tree from Polygroup®! This tree is very innovative, as you can voice control all the lighting
effects via Amazon Alexa or Google Home.The tree itself also comes with Quick Set® technology - allowing you to set up your
tree and light it up in minutes! The instructions below will help you easily set up your new tree.
ASSEMBLY INSTRUCTIONS
Tree Top
Section 2
Section 1
WE ARE HERE TO HELP!
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com OR 1-888-919-0070
Adapter
to be plugged
into wall
outlet
1
Align both arrows in
a straight line before
sliding down to insert
Open the
cap cover
Do Not Tamper
Internal Parts
Fig. A - Tree Stand Assembly
Unfold the legs and lay the stand in
a flat area.Then slide the locking disc
downward and snap into place.

Good Afternoon
CITY
Weather
Afternoon
86° 79° 75°
Evening Night
amazon alexa
Communlcate Play DevicesHome
Add Devies
Lists & Notes
Reminders & Alarms
Contacts
Routines
Things to Try
Skills & Games
Activity
Help & Feedback
Settings
“Alexa, tell smart tree white"
Smart tree
Education & Reference
polygroup smart tree
Search
1 Result Sort: Relevance
SEARCH
Communlcate Play DevicesHome
ENABLE TO USE
Account linking required
Learn how to voice-activate Polygroup® Smart
Trees & Smart Lights, our latest smart tree series
that talks to Amazon Alexa for a completely
hands-free product control experience.
SMART TREE
Smart Tree
Start By Saying
English (US)
Polygroup
Rated: Guidance Suggested
Communlcate Play DevicesHome
amazon alexa
Smart Tree has been
successfully linked.
Smart Tree : Accoun Linking
https://skills-store.amazon.com
What to do next:
Try
saying: “Alexa, tell smart tree
white"
Close this window to return to the skill
page.
ENGLISH
G文
amazon alexa
Sign in
Forgot password?
Show password
SIGN IN
GREATE A NEW AMAZON ACCOUNT
New to Amazon?
© 1996-2018, Amazon.com, lnc. or its affiliates
Polygroup
Polygroup Smart
Products Setup
2
Follow the steps below to connect your Smart Tree to Amazon Alexa / Google Home.
If you are using Amazon Alexa, follow the steps in“Add Voice Command Module of Polygroup Smart Tree to Amazon Alexa”and
“Connect Your Smart Tree to Polygroup Smart Products app”respectively.
MOBILE APP SET UP INSTRUCTIONS
Setup with Amazon Alexa
Add Voice Command Module of Polygroup Smart Tree to Amazon Alexa
1. Download and install the Amazon Alexa app on your mobile device.
2. Open the app and sign in with your Amazon account. If you do not have an account, create a new one following the instructions
on the app.
3. After you are signed in, click the drop-down menu from
the top left corner of the screen.
4. Select Skills & Games (on iOS) / Skills (on Android).
5. From the top right corner, select the search button and
then search for“Polygroup Smart Tree”.
6. Select “Enable to Use” (on iOS) /“Enable”(on Android).
7.You will need to sign into your Amazon account again to
link your account to the Polygroup Smart Tree module.
8. Refer to Page 4 for instructions on installing the
“Polygroup Smart Products” app and connecting your
Smart Tree to the “Polygroup Smart Products”app.

Type a message
talk to smart tree
Yes
Before you can use Smart Tree,
you'll need to make an account
with them. To do that, they'll need
some of your info. If you want more
details, say "Tell me more." So, can
I share your name, email address,
and profile picture with them?
OK. And just so you know, their
Terms of Service and their Privacy
Policy are on their website. Now,
ready to make your new Smart
Tree account?
Type a message
Smart Tree connected, what would
you like me to do?
Smart Tree
talk to smart tree Type a message
talk to smart tree
Yes
Before you can use Smart Tree,
you'll need to make an account
with them. To do that, they'll need
some of your info. If you want more
details, say "Tell me more." So, can
I share your name, email address,
and profile picture with them?
Polygroup
Polygroup Smart
Products Setup
3
If you are using Google Home, follow steps in “Add Voice Command Module of Polygroup Smart Tree to Google Home”and
“Connect Your Smart Tree to Polygroup Smart Products app”respectively.
Setup with Google Home
Add Voice Command Module of Polygroup Smart Tree to Google Assistant
1. Download and install the Google Home and the Google Assistant app onto your mobile device.
2. Open the Google Assistant app and sign in with your Google (Gmail) account. If you do not have an account, please create
a new one following the instructions on the app.
4. Google will ask for permission in accessing your name,
email address and profile picture.Type“Yes” to continue.
5. Google will ask if you are ready to create a new
Smart Tree account, type “Yes”.
7. Refer to Page 4 for instructions on installing the
“Polygroup Smart Products” app and connecting your
Smart Tree to the “Polygroup Smart Products”app.
6.The authorization process is complete and the
message below will be displayed.
3. After signing in, type "Talk to Smart Tree" at the bottom
of the page.
Note: Ensure that the commands are typed correctly
for Google Assistant to detect what commands you
are giving. (Case sensitive)

Setting Wi-Fi
WI-Fi
CHOOSE A NETWORK....
Ask to Join Networks
PG_GUSET
PG_INTERNAL
PG_WORKSHOP
ST_16c3b3
Other...
Known networks will be joined automatically. If no known
networks are available, you will have to manually select a
network.
ST_16c3b3
CONNECT
FORGET
CANCEL
Signal strength
Encryption type
Excellent
None
Setting Wi-Fi
Wi-Fi
CHOOSE A NETWORK....
Ask to Join Networks
HOME_WIFI
WORK_WIFI
NEIGHBOR
ST-xxxxxx
Other...
Known networks will be joined automatically. If no known
networks are available, you will have to manually select a
network.
ST-xxxxxx
CONNECT
FORGET
CANCEL
Signal strength
Encryption type
Excellent
None
Setting Wi-Fi
WI-Fi
CHOOSE A NETWORK....
Ask to Join Networks
Known networks will be joined automatically. If no known
networks are available, you will have to manually select a
network.
PG_GUSET
PG_INTERNAL
PG_WORKSHOP
ST_16c3b3
Other...
Setting Wi-Fi
Wi-Fi
CHOOSE A NETWORK....
Ask to Join Networks
Known networks will be joined automatically. If no known
networks are available, you will have to manually select a
network.
HOME_WIFI
WORK_WIFI
NEIGHBOR
ST-xxxxxx
Other...
Smart Products
Setup
Register Device
Network Settings
LANGUAGE
* * *
REGISTER DEVICE
Product
EMAIL
MAC
Product
Register
Smart Products
Setup
Register Device
Network Settings
LANGUAGE
NETWORK SETTINGS
SSID/WIFI
PASSWORD
NOSSID
Confirm
Polygroup
5.0
1 Rating
This app is for the setup of the voice-activated
system only.
About this app
Polygroup
Smart Products
Install
Polygroup
4
Connect your Smart Tree to “Polygroup Smart Products”app
1. Download and install the“Polygroup Smart Products”
app from the Apple App Store or the Google Play Store.
2. Plug in your tree to the wall outlet.Wait for 5 seconds.
3. Open the Wi-Fi settings of your mobile device. Connect
to the Wi-Fi ID (ST-xxxxxx) of your Smart Tree.
Note: "XXXXXX" is the unique ID of your tree. If it
cannot be detected, press and hold the button on the
Light Controller for 15 seconds to reset and try again.
4. Launch the“Polygroup Smart Products” app. 5. Go to Network Settings.
Once the connection is successful, the light effect will
be changed to "Color-Change" mode (when clear white
and multi-color lights are alternately flashing)

Setting Wi-Fi
WI-Fi
CHOOSE A NETWORK....
Ask to Join Networks
Known networks will be joined automatically. If no known
networks are available, you will have to manually select a
network.
PG_GUSET
PG_INTERNAL
PG_WORKSHOP
ST_16c3b3
Other...
Setting Wi-Fi
Wi-Fi
CHOOSE A NETWORK....
Ask to Join Networks
Known networks will be joined automatically. If no known
networks are available, you will have to manually select a
network.
HOME_WIFI
WORK_WIFI
NEIGHBOR
Other...
REGISTER DEVICE
Product
EMAIL
MAC
XXXXXXXXXXXX
Smart Tree
Register
REGISTER DEVICE
Product
EMAIL
MAC
XXXXXXXXXXXX
Smart Tree
Register
Smart Products
Setup
Register Device
Network Settings
LANGUAGE
* * *
NETWORK SETTINGS
SSID/WIFI
PASSWORD
HOME_WIFI
Confirm
5
10.The Product Name and MAC will be detected and displayed
automatically. MAC is the specific code to your Smart Tree.
If MAC is not displayed properly, try to reset your Smart
Tree, then re-launch the app and go through the Network
Settings procedures again.
11. Enter your email address.
If you are connecting your Smart Tree to Amazon Alexa, use
the same email address that you registered your Amazon
Alexa account with, then click “Register”.
If you are connecting your Smart Tree to Google Home, use the
same Gmail address that you registered your Google account
with, then click“Register”.
6. Select your own Wi-Fi connection and insert password,
then click“Confirm”.
7.The LED light on the Smart Tree should change to multi-color
effect and flash 5 times before returning to the LED effect.
This represents that your Smart Tree is connected to your
Wi-Fi network successfully.
8. Open the Wi-Fi settings of your mobile device again to reconfirm
your mobile device is connected to your own Wi-Fi network.
9. Go back to the app main page and select “Register Device”.
Note:
If connection to Wi-Fi is not successful within 30 seconds,
the lights will quickly flash white twice, indicating there is
a connection error. It will continue to flash white twice
every 3 seconds.To stop the error light signal, press the
button on the controller box once.
Possible reasons for unsuccessful Wi-Fi connection:
1. Problems with Wi-Fi network
2.Wi-Fi password may be incorrect

6
1. Unplug the product from power.
2. Remove all ornaments and decorations.
3. Disassemble the tree from the top to the bottom. Lift the tree top gently straight up to remove from the section below and fold
all branches towards the pole. Continue until Section 1 is removed from the stand.
4. Close all the protective caps tightly (see Fig. D).
5. Carefully place all the tree sections into the included tree bag (if any) within the packaging
box(es) and tape the box(es) shut.
6. Store the box(es) in a cool, dry place away from direct sunlight. Exposing your tree to
excessive heat or humidity may damage your tree.
If you do not know what to say to Alexa/Google after setup is completed, you can call "HELP." to get into Help mode. The dialogue
is listed below:
Alexa/Google: I can help you choose the light effect for your Smart Tree.
There are 9 light effects to choose from for your Smart Tree, ON, White, Fade White, Blink White, Multi-color, Fade Multi-color,
Blink Multi-color, Color Change and OFF. What effect would you like for your Smart Tree?
STORAGE INSTRUCTIONS
HELP MODE
VOICE CONTROL YOUR SMART TREE
There may be instances where Alexa/Google does not understand your commands.
The dialogue is listed below:
Alexa/Google: I'm sorry, I am not sure I understand your command, please repeat.
There are 9 light effects to choose from for your Smart Tree, ON, White, Fade White, Blink White, Multi-color, Fade Multi-color,
Blink Multi-color, Color Change and OFF. What effect would you like for your Smart Tree?
ERROR MODE
Function
Change lights to White
Change lights to Fade White
Change lights to Blink White
Change lights to Multi-color
Change lights to Fade Multi-color
Change lights to Blink Multi-color
Change lights to Color Change
Turn OFF the lights
Turn ON the lights
“Alexa, tell Smart Tree,White.”
“Alexa, tell Smart Tree, Fade White.”
“Alexa, tell Smart Tree, Blink White.”
“Alexa, tell Smart Tree, Multi-color.”
“Alexa, tell Smart Tree, Fade Multi-color.”
“Alexa, tell Smart Tree, Blink Multi-color.”
“Alexa, tell Smart Tree, Color Change.”
“Alexa, tell Smart Tree, Off.”
“Alexa, tell Smart Tree, On.”
“"Hey Google, talk to Smart Tree, White."
"Hey Google, talk to Smart Tree, Fade White."
"Hey Google, talk to Smart Tree, Blink White"
"Hey Google, talk to Smart Tree, Multi-color."
"Hey Google, talk to Smart Tree, Fade Multi-color."
"Hey Google, talk to Smart Tree, Blink Multi-color."
"Hey Google, talk to Smart Tree, Color Change."
"Hey Google, talk to Smart Tree, Off."
"Hey Google, talk to Smart Tree, On."
Alexa Google
Once the mobile app setup is completed, enjoy the tree lights by giving the below voice commands:
To ensure the correct responses from Alexa/Google Home, it is recommended to say the commands clearly.
You can also change the light effects by pressing the button on the Light Controller (see Fig. B).
Button
12. Click“OK”when registration is completed. 13.You can now directly send voice commands to the
Amazon Echo / Google Home device to control the
lighting effects of the Smart Tree.
Fig. D

7
CAUTION:
To reduce the risk of fire and electric shock:
a) Only use the power supply that is provided with this product.
b) Do not install on trees that have needles, leaves or branches covering metal or materials which look like metal.
c) Do not mount or support strings in a manner that can cut or damage wire insulation.
1. For pre-lit trees, if the tree does not illuminate
a. Check if power cord/adapter/all light string plugs are properly and firmly plugged into the wall outlet.
b. Gently turn the poles to make sure they are connected into place.
2. For hinged trees, if some branches are loose
a. Place the loose branch into the hinge bracket.
b. Insert the included hinge pin through the holes of bracket and
secure with the included washer (see Fig. E).
3. Smart Tree does not respond to voice commands via Alexa / Google
a. Check to see if Smart Tree and Amazon Echo / Google Home devices are all connected to your personal Wi-Fi network successfully. Check
and fix possible problems such as incorrect Wi-Fi password is used, Wi-Fi router is not on / operating properly; Wi-Fi port is damaged, etc.)
b. For Alexa: Check if your Amazon account is authorized to Amazon Echo and if they are connected. Check if both Amazon Echo and Smart
tree are registered using the same email account.
For Google: Check if your Google account is authorized to Google Home and if they are connected. Check if both Google Home and Smart
tree are registered using the same email account.
4. Connection of 10 or more Smart Products under the same email account
Only 10 Smart Products can be linked to one email account. If it exceeds the limit, the first product that was linked will disconnect from the
email account.
5. If your mobile device or app cannot connect to the Smart Tree's Wi-Fi
a. Some mobile devices need permission to connect to the Smart Tree's Wi-Fi. Grant the permission as required.
b. Your personal Wi-Fi network also needs permission to link with the Smart Tree's Wi-Fi. Grant the permission as required.
6. If the Polygroup Smart Products App does not work properly
a. Download and install the latest version of the Polygroup Smart Products app from Google Play Store or Apple App Store.
b. Authorize all permissions required by the app during the installation process.
This tree includes hinge pins & washers.
To order extra parts, please contact our Customer Service Center.
SPARE PARTS
TROUBLESHOOTING TIPS
Fig. E
For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact us at 1-888-919-0070
or visit our website at www.polygroupstore.com. One of our customer service representatives will be happy to assist you.
TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
CUSTOMER SERVICE FOR CHRISTMAS TREES
Customer Name:
Address(No P.O. Boxes):
City & State:
Zip Code:
Day Phone:
Date Purchased:
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem: