Polygroup TG90M6010X00 User manual

MADE IN CHINA
ASSEMBLY INSTRUCTIONS MADE IN CHINA
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from Polygroup®!
Carefully follow the instructions below on how to assemble your new tree quickly and at ease:
1. Choose your desired spot for assembling the tree.
2. Assemble the tree stand (Fig. A) and place on a level surface.
* For Indoor Use OnlyFig. B - Tree Assembly
Tree Top
Section 2
Section 1
Fig. A - Tree Stand Assembly
Click
Pull apart tree stand legs until they
snap and form an ‘X’ shape.
To close the stand, press the metal
button and fold the legs together.
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Insert the pole of Section 1 into the assembled
stand . Insert the pole of Section 2 into Section 1. Insert the pole of the tree top into Section 2.
Ensure that all poles are firmly secure.
5. Shape the tree from the bottom to the top. Start with the branches farthest from the pole – fan out
in a star shape (Fig. C), and continue until the entire tree is shaped.
6. Slightly upsweep all tips for a fuller, uniform look. Shift branches to fill in any gaps.Your Christmas
tree is now ready to be decorated.
Top view Side view
Fig. C
MODEL #: TG90M6010X00 2019 TREE LETTER "O"
Sku # 5064563

ASSEMBLY INSTRUCTIONS MADE IN CHINA
STORAGE INSTRUCTIONS
1. Remove all ornaments and decorations.
2. Disassemble the tree from the top to the bottom. Gently lift the pole straight up to remove from the
section below, and fold all branches toward the pole.
NOTE: In case of difficulty separating the poles, apply a small amount of lubricant at the joint, rotate
the upper pole in both directions, and lift the upper pole again.
3. Carefully place all tree sections into the shipping box and tape it shut.
4. Store your tree in a cool, dry place away from sunlight. Exposure to excessive heat or humidity may
damage your tree.
5. Keep out of reach of pets and children.
TROUBLESHOOTING TIPS
Loose Hinge Pin
1. Place the branch into the slot of bracket.
2. Insert a new hinge pin (included) through the hole
and secure using the retainer washer (Fig. D).
SPARE PARTS
This tree includes hinge pins/washers. If extra parts are needed, please contact our customer
service center.
Fig. D
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance or missing parts, Do Not Return To Place Of Purchase.
Please contact us at 1-888-919-0070 or visit our website at www.polygroupstore.com. One of
our customer service representatives will be happy to assist you.
TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
Customer Name:
Address (NO P.O. Boxes):
City & State:
Zip Code:
Day Phone:
Date Purchased:
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
Hobby Lobby Stores, Inc. • Oklahoma City, OK 73179 • www.hobbylobby.com