Polygroup TG76P3945P01 User manual

Christmas Tree
Model: TG76P3945P01
Sku # 1001 133 749
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
TREE ASSEMBLY INSTRUCTIONS
a. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
When using electrical products, basic precautions should
always be followed, including the following:
Congratulations on purchasing your new tree from Polygroup®! Carefully follow the instructions below on how to quickly and
easily set up your new tree.
b. Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use. When products are
used in outdoor applications, connect the product to a
Ground Fault Circuit Interrupting (GFCI) outlet. If one is
not provided, contact a qualified electrician for proper
installation.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or electric
heaters, fireplaces, candles, or other similar sources of
heat.
e. Do not secure the wiring of the product with staples or
nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, or when
retiring for the night, or if left unattended.
h. This is an electric product – not a toy! To avoid risk of fire,
burns, personal injury and electric shock it should not be
played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire,
or light string.
k. Do not close doors or windows on the product or exten
sions cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any materi
al that is not a part of the product when in use.
m. The supply cord cannot be replaced. If the cord is
damaged the product should be scrapped.
n. The lamps of this product are not replaceable. Do not
attempt to change or modify the lamps.
o. For LED string only. To reduce the risk of fire or electric
shock, do not attempt to replace lamps or modify string.
p. Read and follow all instructions that are on the product
or provide with the product.
q. SAVE THESE INSTRUCTIONS.
Assembling the tree stand
Assembly
Step 1. Choose a location near a wall outlet.
Step 2. Unfold the legs of the tree stand (D) and lay the stand on
the floor.
Step 3. Slide the locking disk of the tree stand (D) down until it
snaps into place.
This tree comes with Quick Set™ technology - set up and light
up your tree in less than 10 minutes!
Step 1. Remove the protective caps from the tree bottom (C) and
insert the pole into the tree stand (D).
Step 2. Remove the protective caps from the tree center (B) and
insert the pole into the tree bottom (C) .
Step 3. Insert the tree top (A) into the tree center (B).
Step 4. Shape the branches to your preference by working from the
bottom to the top. When adjusting branches, ensure that all
wires are free of branch hinges.
Step 5. Plug the adaptor into the wall outlet. All your lights should
now be lit.
Step 6. Shape the tree from the bottom to the top. Start with the
branches farthest from the pole – fan out in a star shape,
and continue until the entire tree is shaped.
Step 7. When finished shaping the branches, slightly upsweep all
branch tips for a uniform look.
Assembling the tree
Pre-Assembly
Package Contents
A
B
C
D
Tree Top
Tree Center, Sticker 2
Tree Bottom, Sticker 1
Tree Stand
1
1
1
1
Quantity
Part Description
Top view Side view
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120V, 60Hz, 0.83A Max.
Output: 24V DC 2A
Tree top
Section 2
Section 1
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover
Adaptor
To Be Plugged
Into Wall
Outlet
70S
60S
70S
60S
70S
60S
Insert Green Label
Plug into Adaptor

Christmas Tree
Model: TG76P3945P01
Sku # 1001 133 749
For any questions, assistance, or missing parts, Do Not Return To
Place Of Purchase. Please contact us at 1-888-919-0070 or visit
our website at www.polygroupstore.com. One of our customer
service representatives will be happy to assist you.
Repairing Loose Hinges
Step 1. Place the branch into the slot of the bracket.
Step 2. Insert a new hinge pin through the holes of the bracket
and secure with a washer.
Maintenance
Spare parts
Create Your Twinkly Light Show
This tree is equipped with Twinkly RGB LED lights. Simply download
the app, and add magic to your tree. For details, please see the
Twinkly Pre-lit Tree Instructions Guide.
Use and Care Instructions
1. Before using or reusing, inspect product carefully. Discard any
products that have cut, damaged or frayed wire insulation or
cords, cracks in the lampholders or enclosures, loose
connections, or exposed copper wire.
2. Before disassembling the tree, unplug the tree and remove all
ornaments and decorations.
3. Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
4. Repeat this step for the center and bottom tree sections.
5. When storing the product, carefully
remove the product from wherever it is
placed, including tree, branches, or
bushes, to avoid any undue strain or stress
on the product conductors, connections,
and wires. Cover the protective cap on the
poles to avoid damaging the internal parts.
6. When not in use, store neatly in a cool, dry location protected
from sunlight.
CAUTION:Use only the power adaptor that was
provided with this product. Using a different power adaptor will
damage the lights and cause fire, electrical shock hazard.
Troubleshooting
Problem Solution
The tree does
not light
Ensure that:
i) tree sections are connected to each
other securely;
ii) Green Label Plug is connected to
Adaptor securely, and
iii) Adaptor is plugged into the wall outlet
securely.