Polygroup TZ90M3W48X00 User manual

TREE ASSEMBLY INSTRUCTIONS
SHAPING AND ADDING BRANCHES
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A) Then insert the tree pole tightly into the stand.
3. Sort all branches according to color codes marked on the end of each branch. Below is a list of the color codes for your tree.
(See Fig. B) (Please note: the number of rows may vary with different tree sizes.)
Congratulations on purchasing your new tree from Polygroup®!
Carefully follow the instructions below on how to quickly and easily set up your new tree.
1. Shape each branch by either placing the branch in a bracket which is at a comfortable level to work (Fig. 1), or holding the
branch in your hand with the hooked end pointing down. (Fig. 2) BEGIN WITH THE
BRANCHES AT THE BOTTOM OF THE TREE AND WORK UP TOWARDS THE TOP.
2. When shaping each branch, work from the branch hook and move outwards to the end tip of the branch. Start by wrapping the
back tip around the end of the branch stem to cover the branch wire. (Fig. 3)
3. Working from the branch's hook moving outwards, fan each tip out using this pattern: one tip to the right of the branch's center
wire, one tip to the left of the branch's center wire, one tip parallel to the branch's center wire. (Fig. 4) Tips should be slightly
offset from each other so that they do not line up exactly one behind the other. All tips should be curved upwards when looked
at from the side. (Fig. 5)
4. As each branch is shaped, place the color coded branch securely into the matching color coded bracket. (Fig. 6) As you finish
each level of branches, make sure the rows look evenly distributed to the levels above and below it. Adjust tips as needed to
even appearance. (If your tree includes branches with side wings, arrange these branches so that the wings are on every other
branch if necessary.)
5. When all the branches are shaped and put into their color coded matching brackets, shape the top section. Do this by pulling
down each row of tips in an even, circular pattern. (Fig. 7)
Fig.B
C
D
B
E
F
G
TREE TOP
ROW
WITHOUT COLOR
COLOR CODED
RED
YELLOW
GREY
D
GREY
DARK BLUE
LIGHT BLUE
DARK PURPLE
H
GREEN
I
ORANGE
G
DARK PURPLE
H
GREEN
I
ORANGE
J
WHITE
K
BURGUNDY
L
PINK
Fig. A - Tree Stand Assembly 1.Unfold the legs and lay the stand in
a flat area.Then slide the locking
disc downward and snap into place.
2.When inserting the bottom section
of the tree into the assembled stand,
thread the eyebolt into the stand
and tighten until the pole is firmly
secured.
Eye Bolt
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com OR 1-888-919-0070
NEED HELP?
1
TREE# : C38
MODEL # : TZ90M3W48X00
SKU # : 124304249

6. Start from the bottom layer of the tree topper and work upwards to the top tip.
7. Carefully curve each tip upwards for a natural look.
8. Insert top securely into tree's center pole. (Fig. 8)
9. Step back and take an overall look at the tree. Shift tips as needed to fill in any gaps. Slightly upsweep all branch tips for a
uniform look. Your Christmas tree is now complete and ready to be decorated. (Fig. 9)
STORAGE TIPS
1. Remove all ornaments and decorations.
2. Start by removing the tree top and then removing each layer of branches going from top to bottom of the tree.
3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and rotate the upper pole in
both directions. Lift up the upper pole again.
4. Press tips neatly back to the center of branch wire.
5. Carefully place all tree sections and branches into shipping box and tape it shut.
6. When not in use, please store the tree in a cool, dry place away from sunlight.
Fig. 3
Fig. 6 Fig. 8
Fig. 4
Branch
Fig. 5
Side view
Fig. 2Fig. 1
Fig. 9Fig. 7
For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact us at 1-888-919-0070 or
visit our website at www.polygroupstore.com. One of our customer service representatives will be happy to assist you.
TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
CUSTOMER SERVICE FOR CHRISTMAS TREES
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
Customer Name:
Address:(No P.O. Boxes)
City & State:
Zip Code:
Day Phone:
Date Purchased:
2
CAUTION:
a) Do not use near candles, heaters, or other similar sources of heat.
b) Do not use candles on tree. Use only included light string (if present).