Polygroup TM3000NSQM00 User manual

3. Carefully insert the tree body into the assembled stand.Make sure the pole is firmly inserted
into stand.
4. Shape the branches. Shift branches to fill any gaps, lightly upsweep all branch tips for a uniform
look.Your tree is now ready to decorate.
5. Plug the cord into wall outlet.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from Polygroup®! Carefully follow the
instructions below on how to quickly and easily set up your new tree.
ASSEMBLY INSTRUCTIONS MADE IN CHINA
MODEL #: TM3000NSQC00,TM3000NSQM00
*Electrical Rating For The Tree
(For Indoor Use Only)
0.24A 120V 60Hz
Fig. B - Tree and Light Assembly
Insert and slide the legs
upward into the slots of
the base until firmly
secured.
Fig. A - Tree Stand Assembly
Insert
Plug Into Wall
Outlet

ASSEMBLY INSTRUCTIONS MADE IN CHINA
1. Unplug light string from the wall outlet and remove all ornaments and decorations.
2. Gently lift off the tree body from the tree stand.
3. Carefully place the tree into shipping box and tape it shut.
4.When not in use, please store your tree in a cool, dry place away from sunlight.Exposing your
tree to excessive heat or humidity may damage your tree.
STORAGE INSTRUCTIONS
For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please check to make sure that the plug is plugged into the wall outlet. Refer to assembly guide
for instructions.
2. Please check for blown fuse at the light string plug.Replace as needed.
Note: Please make sure to use appropriate replacement fuse as indicated on the light string plug.
3. Please check for loose, broken or missing light bulbs and replace as needed.
TROUBLE SHOOTING TIPS
For pre-lit trees spare bulbs and fuse are also included.
SPARE PARTS