Polytunnel Company Garden Pride Instruction Manual

Building Instructions
Garden Pride
Copyright © The Polytunnel Company (CWP Ltd), Kilmurray, Trim, Co. Meath, Ireland
www.thepolytunnelcompany.ie [e-mail]

TOOLS REQUIRED
•Spade
•Tape Measure
•Sharp Knife
•Cordless Drill
•Angle Grinder
•Spirit Level
•Saw
•Tex Screw Socket •Marker Pen
•String Line •Hammer
Copyright © The Polytunnel Company (CWP Ltd), Kilmurray, Trim, Co. Meath, Ireland
www.thepolytunnelcompany.ie in[email protected]

TUNNEL WIDTH (W)
TUNNEL LENGTH (L)
HOOP SPACINGS (L1)
FOUNDATION PIN LAYOUT AND FIXING 1
150mm
Copyright © The Polytunnel
Company (CWP Ltd), Kilmurray,
Trim, Co. Meath, Ireland
www.thepolytunnelcompany.ie
[email protected]

MAIN STEELWORK ASSEMBLY 2
KEEP ALL SWAGE HOOPS
TO ONE SIDE
Copyright © The Polytunnel Company (CWP
Ltd), Kilmurray, Trim, Co. Meath, Ireland
www.thepolytunnelcompany.ie
[email protected]

CROP BAR ASSEMBLY 3
Copyright © The Polytunnel Company (CWP Ltd),
Kilmurray, Trim, Co. Meath, Ireland
www.thepolytunnelcompany.ie in[email protected]