Polywood AD5030 User manual

To view our full warranty, please visit the warranty
page on our website at polywoodinc.com/resources.
If you have questions or concerns regarding assembly
instructions or missing parts, please contact us at
[phone] or email [email protected]
06/28/16
AD5030
Classic Folding Adirondack
Assembly Instructions

PARTS
TOOLS
Something missing?
Call [phone]
1
2
3
4mm T-handle hex key
(included)
7/16 Wrench
(not included)
x 2
3/4 x 2 - Adirondack Pin HDPE
B
Correct Incorrect
A
A
B
B
NOTE: Pins can be removed for folding
A
D
C
C
x 2
1/4-20 Nylock Nut
D
x 2
1/4 Flat Washer
A
1/4-20 x 1.875 Wafer SHCS
x 2

TOOLS NEEDED
4mm Hex Key (Included)
Phillips head screwdriver
A screw gun is recommended
A - .27 X 2 SOCKET WAFER A
Bottom Legs
Top legs
B - 8 X 1-1/4 PHIL FLAT SCREW
3/22/2013
ASSEMBLY INSTRUCTIONS
Connect the braces using (1) 8x1¼ screw.
Qty. Description
Model: RST18
on the bottom brace
NOTE: There is no pilot hole, just a thru hole
the table top.
Place the leg assemblies together on
Step 1
in pre-drillled holes.
ALL HARDWARE IS STAINLESS STEEL
__(1) Table top
1
Attach the legs using (4) 14x2 Screws
Step 2
Step 3
__(1) Bottom leg assembly
__(1) Top leg assembly
4

To view our full warranty, please visit the warranty page on our website at
polywoodinc.com/resources.
If you have questions or concerns regarding assembly instructions or missing parts,
please contact us at [phone] or email suppor[email protected]
youtube.com/polywood@POLYWOODINCPOLYWOOD POLYWOODPOLY-WORLD
Blog