Polywood AD5030 User manual

B - 1/4 FLAT WASHER
Step 2
Qty. Description
Step 1
Incorrect
2
2
Unfold chair assembly
A/B
A/B
Step 2
2
2
AD6030
Model: AD5030, AD5031
HARDWAREISCOATEDSTAINLESSSTEELUNLESSOTHERWISESPECIFIED
TOOLS NEEDED
Insert (2) 2¼" bolts, washers and locknuts
into pre-drill holes
Then insert pins
11/21/2012
ASSEMBLY INSTRUCTIONS
bolt
B - 1/4-20 NYLOCK NUT
nut
Step 1
Correct
leg washer
4MM HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
3/4 X 2 ADIRONDACK PIN HDPE
A - 1/4-20 X 2-1/4 WAFER SHCS

ALL HARDWARE IS STAINLESS STEEL
Qty. Description
Model: RST18
__(1) Table top
Step 2
the table top.
Place the leg assemblies together on
Step 1
in pre-drillled holes.
1
Attach the legs using (4) 14x2 Screws
Connect the braces using (1) 8x1¼ Screw.
Step 3
__(1) Bottom leg assembly
__(1) Top leg assembly
4
12/4/2012
ASSEMBLY INSTRUCTIONS
B - 8 X 1-1/4 PHIL FLAT SCREW
Bottom Legs
Top legs
TOOLS NEEDED
4mm Hex Key (Included)
Phillips head screwdriver
A screw gun is recommended
A - .27 X 2 SOCKET WAFER A