Polywood AD5030 User manual

Step 1
Model: AD5030, AD5031
AD6030
Step 1
Unfold chair assembly
Step 2
Insert (2) 2¼" bolts, washers and locknuts
into pre-drill holes
Then insert pins
TOOLSNEEDED
Correct
Incorrect
4MM HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
Qty. Description
bolt
leg
washer
nut
3/4 X 2 ADIRONDACK PIN HDPE
2
A - 1/4-20 X 2-1/4 WAFER SHCS
2
A/B
2 B - 1/4 FLAT WASHER
2 B - 1/4-20 NYLOCK NUT
A/B
Step 2
ASSEMBLYINSTRUCTIONS
HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED 9/13/2012

Model: RCT38, RKT38
Step 1
Lay table top on flat surface.
Attach legs to table top and braces to legs
using (8) 2 1/2" screws.
(1) Table top
(4) Legs
(2) Short Brace
(2) Long Brace
(1) Hardware pack
Short brace
TOOLSNEEDED
4MM HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
Removable table plug
included in table.
Step 2
Attach braces to legs using
(4) 2 1/2" screws.
Qty. Description Long brace
.27 X 2-1/2 SOCKET WAFER A
12
ASSEMBLYINSTRUCTIONS
ALL HARDWARE IS STAINLESS STEEL UNLESS OTHERWISE SPECIFIED 9/17/2012