Polywood ECA15 User manual

using (2) 2" screws
Qty. Description
Model: ECA15
using (2) 2" screws
Attach back to arm
using (2) 2" screws
Attach front legs to seat
using (6) 1-7/8" bolts, nuts
Step 2
__(1) Hardware pack
__(1) Short brace
__(1) Long brace
__(2) Arms
__(2) Front legs
__(1) Back using (2) 2" screws
Attach long brace
and washer (2) 2-1/4" bolts, nuts and washer
Attach arms to front leg using
__(1) Seat
Step 1
Step 3
Attach back to seat Step 4
Attach short brace to rear leg
ALLHARDWAREISSTAINLESSSTEEL 11/28/2012
ASSEMBLY INSTRUCTIONS
B
long brace
front
A
A
wing faces D,E
B
A
short brace
A
E-1/4-20 NYLOCK NUT
8
TOOLS NEEDED
7/16 Wrench
4mm HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
A
A
A
A
CD,E
D-1/4 FLAT WASHER
8
B-1/4-20 X 1-7/8 WAFER SHCS
6
C-1/4-20 X 2-1/4 WAFER SHCS
2
A-.27 X 2 SOCKET WAFER A
8

8
Qty. Description
Model: ECT18, ECT26
using (4) 2" screws
Step 1
Attach sideframes to table top
__(1) Hardware pack
__(2) Braces
__(2) Sideframes
using (4) 2" screws
__(1) Table top Step 2
Attach braces to sideframes
ALLHARDWAREISSTAINLESSSTEEL 11/28/2012
ASSEMBLY INSTRUCTIONS
A - .27 X 2 SOCKET WAFER A
4mm HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
TOOLS NEEDED

__(1) Long leg assembly
Qty. Description
Model: SBO22
__(1) Hardware pack
TOOLS NEEDED
__(1) Short leg assembly
Step 1
Attach long leg assembly to short leg assembly
with (6) 1-7/8” bolts, nuts and washers
11/27/2012
ASSEMBLY INSTRUCTIONS
A-1/4-20 X 1-7/8 WAFER SHCS
6
B-1/4 FLAT WASHER
6
B
A
C
ALL HARDWARE IS STAINLESS STEEL
6C-1/4-20 NYLOCK NUT
- 7/16 wrench
- 4mm hex key, allen, t-handle
(incluided)