Polywood GN23 User manual

A
A
USING (6) 1-3/4" SCREWS
ATTACH SEAT TO SIDE FRAMES
STEP 2
QTY
1
4
10
_(1) BACK CUSHION
_(1) HARDWARE PACK
_(2) ARM ASSEMBLY
_(2) BACK LEG
_(1) SEAT ASSEMBLY
_(1) BACK ASSEMBLY
_(2) GUSSETS
_(1) SEAT CUSHION
TOOLS NEEDED
DESCRIPTION
1/20/2017
ASSEMBLY INSTRUCTIONS
AA
USING (2) 1-3/4" SCREWS
STEP 1
ATTACH ARM TO BACK LEG
MODEL: GN23
C - 8 X 2 PHIL FLAT SCREW
B
A
A
USING (2) 1-3/4" AND (2) 3" SCREWS
STEP 3
ATTACH BACK TO SIDE FRAMES AND SEAT
B
C
FRAMES USING (4) 2" SCREWS
STEP 4
ATTACH GUSSETS TO SEAT AND SIDE
C
B - .273 X 3 SOCKET WAFER A
2
A - .273 X 1.75 SOCKET WAFER B
HDWPK-#8 SCREW PLUGS, 4X (EXTRAS)
4MM HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
PHILLIPS SCREWDRIVER
(SCREW GUN RECOMMENDED)

PARTS
TOOLS
Something missing?
Call [phone]
1
3/8" Wrench
(not included) x 4
A
3" Screw — HHW14x3
x 4
A
To view our full warranty, please visit
the warranty page on our website at
polywoodinc.com/resources.
If you have questions or concerns regarding
assembly instructions or missing parts,
please contact us at [phone] or
email [email protected]
1/30/17

MNT36
NEWPORT CONVERSATION TABLE
Assembly Instructions
youtube.com/polywood@POLYWOODINCPOLYWOOD POLYWOODPOLY-WORLD
Blog

To view our full warranty, please visit the warranty page on our website at
polywoodinc.com/resources.
If you have questions or concerns regarding assembly instructions or missing parts,
please contact us at [phone] or email suppor[email protected]
youtube.com/polywood@POLYWOODINCPOLYWOOD POLYWOODPOLY-WORLD
Blog