Polywood TT11 User manual

TOOLS NEEDED
4MM HEX KEY ALLEN, T-HANDLE
(INCLUDED). 7/16 WRENCH (NOT INCLUDED)
A - 1/4-20 X 2-1/2 WAFER SHCS
2
Shipping Bar
3/4" screw
REMOVE AND RE-INSERT
QTY DESCRIPTION
MODEL: TT11
__(1) HARDWARE PACK
ADIRONDACK CHAIRS NOT INCLUDED
ALL HARDWARE IS STAINLESS STEEL
STEP 1
- Remove (2) 3/4" screws from shipping bar and recycle bar by taking it to nearest recycling
center and placing in plastic milk jug bin.
STEP 2
- Remove (2) 2-1/4" Bolts from front of chair arms and replace with (2) 2-1/2" (A).
Use existing Washer and Nylock Nut.
-Remove 3" Hex Head Lags from back of chair arms and re-insert to fasten table in place.
4/13/2015
ASSEMBLY INSTRUCTIONS

To view our full warranty, please visit the warranty page on our website at
polywoodinc.com/resources.
If you have questions or concerns regarding assembly instructions or missing parts,
please contact us at [phone] or email suppor[email protected]
youtube.com/polywood@POLYWOODINCPOLYWOOD POLYWOODPOLY-WORLD
Blog