Pond Boss 52543 User manual

Thank you for choosing pond boss®
BEFORE RETURNING TO STORE
Contact Customer Care:
1-888-755-6750
Merci d’avoir choisi pond boss®
AVANT DE RETOURNER AU MAGASIN
Contact Les Soins de Client:
1-888-755-6750
Gracias por elegir pond boss®
ANTES DE DEVOLVER AL MINORISTA
Contacte Atención al Cliente:
1-888-755-6750
Item | Article | Artículo#
52543

Advertencias y precauciones....................................................15
Contenido del paquete.............................................................16
Preparación.............................................................................16
Instrucciones de funcionamiento........................................16-18
Mantenimiento...................................................................18-19
Piezas de repuesto...................................................................19
Garantía limitada...............................................................19-20
Español
TABLA DE CONTENIDO
TABLE OF CONTENTS
Warnings and Cautions..............................................................3
Package Contents......................................................................4
Preparation................................................................................4
Operation Instructions............................................................4-6
Maintenance..........................................................................6-7
Replacement Parts ....................................................................7
Limited Warranty....................................................................7-8
English
Avertissements et précautions...................................................9
Contenu de l’emballage...........................................................10
Préparation..............................................................................10
Instructions d’utilisation.....................................................10-12
Maintenance......................................................................12-13
Pièces de rechange.................................................................13
Garantie limitée.................................................................13-14
Français
TABLE DES MATIÈRES

PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO STORE: 1-888-755-6750 3
EN
16 in. Waterfall Spillway with Filtration
Questions, problems, missing parts?
1-888-755-6750
[e-mail]
Monday - Friday
Visit thepondboss.net for a step by step guide and videos
WARNINGS AND CAUTIONS
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully prior to starting up the unit!
The water system on which the operation of this product is based requires utmost
care and maintenance, possibly also the use of chemicals, in order to prevent and
keep the occurrence of micro-organisms and harmful bacteria, especially legionellae
that are responsible for legionnaire’s disease, under control. Non-observance of this
information about correct maintenance and care can entail the spreading of harmful
bacteria. Due to the fact that for decorative purposes, water nozzles distribute water
in the air, water droplets containing harmful bacteria can enter your lungs and cause
life-threatening diseases.
It is the responsibility of the owner of the water system and its attendant units to
ensure their maintenance and care in compliance with the laws, directives and
instructions laid down for this purpose. In order to avert harmful contamination, we
urgently recommend the user to ensure cleaning and care of the water system and the
water feature including the nozzle, and to take all necessary measures to maintain the
technical units, such as pumps, tubing, connectors, under-water lighting, and nozzles
to keep them in functional order in line with safety aspects. However, the maintenance
and care obligation is not limited to the technical products supplied, but encompasses
the entire system.
We also recommend the owner to keep records of the dates when maintenance and
care was carried out, and to document all water tests made in conjunction with the
water feature. The owner is solely responsible for guaranteeing the safety of the water
feature. Use or maintenance of the units sold and the system are beyond GeoGlobal
Partner’s influence. GeoGlobal Partners can only be held liable for manufacturing faults
of pond boss® units.

VISIT WWW.THEPONDBOSS.NET FOR PRODUCT INFORMATION AND TIPS.
4
EN
Part Description Qty
ASpillway 1
BCoupler 1
CGasket 1
DAdapter 1
EBio-balls in Bag 2
FFilter Pad 1
GClip 2
HCover 1
IFace Plate 1
JScrew 12
PREPARATION
Before beginning assembly or operation of product, make sure all parts are present.
Compare parts with package contents list and diagram. If any part is missing or
damaged, do not attempt to assemble, install or operate the product. Contact Customer
Care for replacement parts.
•Estimated Assembly Time: 45 minutes
•Tools required for assembly: Carpenter’s level, Marker or Chalk, Utility Knife, Caulking
gun, Liner sealant, Temporary nails, Philipshead screwdriver, and Hacksaw.
OPERATION INSTRUCTIONS On the perimeter of the liner
At the beginning of a stream with liner
underneath
PACKAGE CONTENTS
Choose a location for your Waterfall
Spillway. I can sit inside the liner or along
the perimeter of the liner. Sometimes
a spillway is placed as the beginning
of a stream. The most important thing
to remember is that all water leaving
the spillway needs to have a pond liner
underneath it to avoid water loss as this
will drain your pond.

PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO STORE: 1-888-755-6750 5
EN
Apply sealant
Step 1. Place the spillway in the desired
location and ensure it is level. If the spillway
is resting on the perimeter of the liner and
you do not want to affix the liner to the
spillway, skip to the note before step 8.
Step 2. Pull the liner up towards the lip of
the spillway. Make sure that the liner is able
to rest freely and will not be stretched once
water is added. Carefully rinse the front and
back of the liner with water and dry. The
surface needs to be clean for a proper seal.
Mark the lip of the spillway on the liner as
shown in figure 2. If you use a white chalk
for ease of visibility reclean the area after
step 3.
Step 3. Carefully trim away the section of
liner for the spillway opening as shown in
figure 3.
Step 4. Apply a continuous 1/4 in. bead of
sealant around the frame for the face plate
(the area along the sides and under the
spillway lip). There will be some holes in this
area for screws, so make sure to go around
those as you add sealant along this area.
Step 5. Align the trimmed area of the liner
flatly across the area where sealant was
applied. Make sure that the liner rests flat
without any wrinkling or pulling.
Step 6. Insert a temporary nail into the top
hole to the right and left of the spillway
opening. Use the nails to puncture through
the liner and hold it in place.
Step 7. Add the face place on the outside of
the spillway and liner to secure the liner to
the spillway. Carefully install all screws into
the face plate. Lastly remove the temporary
nails and replace with the last two screws.
NOTE: Do no use a power drill to complete
this step.
1
2
3
4
5
Temporary nail
6
7