POP UP ROLGUARD User manual

ROLGUARD USER GUIDE
IT’S SAFE AND SIMPLE...
Refer to instruction
manual/booklet.
[phone] [e-mail] popupproducts.co.uk
Maximum total load.
Maximum number
of users.
Keep a secure grip on the ladder
when ascending and descending.
Maintain a handhold whilst
working from a ladder or take
additional safety precautions if
you cannot.
Fully open before use.
Use only with
stabilisers.
Ladder for
Professional use.
Ladder for
Domestic use.
Avoid work that imposes a
sideways load on ladders,
such as side-on drilling
through solid materials.
Do not overreach.
Do not ascend descend
unless you are facing
the ladder.
Do not use the ladder on
an unlevel or inrm base.
Do not wear unsuitable
footwear when climbing
a ladder.
Any horizontal surface which
looks like a platform on a mobile
platform ladder that is not
designed for standing on (e.g.
plastic work tray) will be clearly
indicated on that surface.
Inspect the ladder after
delivery. Before every use
visually check the ladder is
not damaged and is safe
to use.
Do not carry equipment
which is heavy or dicult
to handle while using the
ladder.
Do not use the ladder if
you are not t enough.
Certain medical conditions
or medication, alcohol or
drug abuse could make
ladder use unsafe.
Identify any electrical risks
in the work area, such as
overhead lines or other
exposed electrical equipment
and do not use the ladder
where electrical risks occur.
Do not step o the side of
the mobile platform ladder
onto another surface.
Do not use the ladder
as a bridge.
Do not erect ladder on
contaminated ground.
ALWAYS
Prevent damage of the ladder when
transporting e.g. by fastening and, ensure
they are suitably placed to prevent
damage.
Ensure the ladder is suitable for the task.
For professional use a risk assessment
shall be carried out.
When positioning the ladder take into
account risk of collision with the ladder
e.g. from pedestrians, vehicles or doors.
Secure doors (not re exits) and windows
where possible in the work area.
Use non-conductive ladders for
unavoidable live electrical work.
Always pay attention to wind conditions
when using the ladder outdoors.
NEVER
Do not spend long periods on a ladder
without regular breaks.
Do not use the ladder if contaminated,
e.g. with wet paint, mud, oil or snow.
Do not use the ladder outside in adverse
weather conditions, such as a strong wind.
Do not modify the ladder design.
Do not move a ladder while standing on it.

ROLGUARD USER GUIDE
SETTING UP & ADJUSTING THE PLATFORM HEIGHT
[phone] [e-mail] popupproducts.co.uk
Release transport strap by pressing the catch
lock and pulling the strap through the buckle.
1Stand the ladder upright.
Never lean ladder against walls with the
transport wheel in contact with the ground.
2Open ladder out ensuring the platform deck
rests against the top rear rung. The platform
deck safety hook (b) should be applied as
shown above. Pull out stabilisers (c) ensuring
safety bars (d) are fully locked.
3
Loosen Quick-Clamp (e) and slide out
stabiliser leg (f) until the foot is in contact
with the ground. Tighten Quick-Clamp as
shown above. Platform deck height can be
adjusted by extending the telescopic ladder
sections (g). Pull out Quick-Lock pins (h) on
one section, push ladder up one rung and re-
insert Quick-Lock pins. Repeat on opposite
section. Repeat process until desired
platform deck height is achieved. Re-adjust
stabiliser length so stabiliser foot is in contact
with the ground.
4The tooltray (i) can be clicked into place on
either the upper or mid safety rails (j) as
shown above.
5Complete a visual check of the ladder and its
components before accessing the platform
deck. Ensure the spring loaded safety gates
(k) are fully closed once inside the platform
deck area. Periodic checks of the ladder for
correct functionality and damage should be
carried out by competant personnel.
6