Porter-Cable A17914-05-10-06 User manual

Electric
1700 PSI
1.7 GPM
Pressure Washer
Instruction
manual
IMPORTANT
Please make certain that the person who
is to use this equipment carefully reads
and understands these instructions before
starting operations.
Part No. A17914-05-10-06 Rev. 0
FRANÇAIS: PAGE 21
ESPAÑOL: PÁGINA 41
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
PCE1700
Copyright © 2006 Porter-Cable
The Model and Serial No. plate is located on the frame.
Record these numbers in the spaces below and retain for
future reference.
Model No.
Type
Serial No.
®

2- ENG
A17914
SAFETY GUIDELINES - DEFINITIONS
This manual contains information that is important for you to know and understand.
This information relates to protecting YOUR SAFETY and PREVENTING
EQUIPMENT PROBLEMS. To help you recognize this information, we use the
symbols below. Please read the manual and pay attention to these symbols.
Indicates an
imminently hazardous
situation which, if not avoided, will
result in death or serious injury.
Indicates a potentially
hazardous situation
which, if not avoided, may result in
minor or moderate injury.
Indicates a potentially
hazardous situation
which, if not avoided, could result in
death or serious injury.
Used without the
safety alert symbol
indicates a potentially hazardous
situation which, if not avoided, may
result in property damage.
This product contains chemicals, including lead, known to the
State of California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
IMPORTANT SAFETY INSTRUCTIONS
Do not operate this unit until you have read and understand
this Operators Manual for Safety, Operation, and Maintenance
Instructions.
READ AND SAVE THESE INSTRUCTIONS
RISK OF EXPLOSION OR FIRE
WHAT CAN HAPPEN HOW TO PREVENT IT
• Use of acids, toxic or corrosive
chemicals, poisons, insecticides, or
any kind of flammable solvent with
this product could result in serious
injury or death.
• Do not spray flammable liquids.
• Restricting any of the pressure
washer ventilation openings will
cause serious overheating and
could cause fire.
• Never place objects against or on
top of pressure washer. Operate
pressure washer in an open area at
least 12 inches away from any wall
or obstruction that would restrict
the flow of fresh air to the ventilation
openings.
RISK TO BREATHING (ASPHYXIATION)
WHAT CAN HAPPEN HOW TO PREVENT IT
• Some cleaning fluids contain sub-
stances which could cause injury to
skin, eyes or lungs.
• Use only cleaning fluids specifically
recommended for high-pressure
washers. Follow manufacturers
recommendations. Do not use
chlorine bleach or any other
corrosive compound.

3- ENG A17914
RISK OF FLUID INJECTION AND LACERATION
WHAT CAN HAPPEN HOW TO PREVENT IT
• Your pressure washer operates at
fluid pressures and velocities high
enough to penetrate human and
animal flesh, which could result in
amputation or other serious injury.
Leaks caused by loose fittings or
worn or damaged hoses can result
in injection injuries. DO NOT TREAT
FLUID INJECTION AS A SIMPLE
CUT! See a physician immediately!
• Inspect the high-pressure hose
regularly. Replace the hose
immediately if it is damaged,
worn, has melted from contacting
the engine, or shows any signs
of cracks, bubbles, pinholes, or
other leakage. Never grasp a high-
pressure hose that is leaking or
damaged.
• Never touch, grasp or attempt to
cover a pinhole or similar water
leak on the high-pressure hose.
The stream of water IS under high
pressure and WILL penetrate skin.
• Never place hands in front of nozzle.
• Direct spray away from self and
others.
• Make sure hose and fittings are
tightened and in good condition.
Never hold onto the hose or fittings
during operation.
• Do not allow hose to contact muffler.
• Never attach or remove wand
or hose fittings while system is
pressurized.
• Injuries can result if system pressure
is not reduced before attempting
maintenance or disassembly.
• To relieve system pressure, place
on/off switch in off position, turn off
water supply, and pull gun trigger
until water stops flowing.
• Use only hoses and accessories
rated for pressure higher than your
pressure washer's PSI.
RISK OF INJURY FROM SPRAY
WHAT CAN HAPPEN HOW TO PREVENT IT
• High-velocity fluid spray can cause
objects to break, propelling particles
at high speed.
• Light or unsecured objects can
become hazardous projectiles.
• Always wear ANSI-approved Z87.1
safety glasses. Wear protective
clothing to protect against
accidental spraying.
• Never point wand at or spray people
or animals.
• Always secure trigger lock when
wand is not in service to prevent
accidental operation.
• Never permanently secure trigger in
pull-back (open) position.

4- ENG
A17914
RISK OF UNSAFE OPERATION
WHAT CAN HAPPEN HOW TO PREVENT IT
• Unsafe operation of your pressure
washer could lead to serious injury
or death to you or others.
• Do not use chlorine bleach or any
other corrosive compound.
• Become familiar with the operation
and controls of the pressure washer.
• Keep operating area clear of all
persons, pets and obstacles.
• Do not operate the product when
fatigued or under the influence of
alcohol or drugs. Stay alert at all
times.
• Never defeat the safety features of
this product.
• Never leave wand unattended while
unit is running.
• Pressure washer pump contains
moving parts. Contact with moving
parts can cause serious injury.
• Never operate machine with pump
guard removed.
• Do not operate machine with
missing, broken or unauthorized
parts.
• The spray gun/wand is a powerful
cleaning tool that could look like a
toy to a child.
• Keep children away from the
pressure washer at all times.
• Reactive force of spray will cause
gun/wand to kickback, and could
cause the operator to slip or fall
or misdirect the spray. Improper
control of gun/wand can result in
injuries to self and others.
• Do not overreach or stand on an
unstable support.
• Do not use pressure washer while
standing on a ladder.
• Grip gun/wand firmly with both
hands. Expect the gun to kickback
when triggered.
RISK OF BURSTING
WHAT CAN HAPPEN HOW TO PREVENT IT
• Over inflation of tires could result in
serious injury and property damage.
• Use a tire pressure gauge to check
the tires pressure before each use
and while inflating tires; see the tire
sidewall for the correct tire pressure.
NOTE: Air tanks, compressors and
similar equipment used to inflate tires
can fill small tires similar to these very
rapidly. Adjust pressure regulator on
air supply to no more than the rating
of the tire pressure. Add air in small
increments and frequently use the tire
gauge to prevent over inflation.

5- ENG A17914
RISK OF HOT SURFACES
WHAT CAN HAPPEN HOW TO PREVENT IT
• Contact with hot surfaces, such as
engines exhaust components, could
result in serious burn.
• During operation, touch only the
control surfaces of the pressure
washer. Keep children away from
the pressure washer at all times.
They may not be able to recognize
the hazards of this product.
RISK OF CHEMICAL BURN
WHAT CAN HAPPEN HOW TO PREVENT IT
• Use of acids, toxic or corrosive
chemicals, poisons, insecticides, or
any kind of flammable solvent with
this product could result in serious
injury or death.
• Do not use acids, gasoline, ker-
osene, or any other flammable
materials in this product. Use only
household detergents, cleaners and
degreasers recommended for use in
pressure washers.
• Wear protective clothing to protect
eyes and skin from contact with
sprayed materials.
RISK OF
ELECTRICAL SHOCK
WHAT CAN HAPPEN HOW TO PREVENT IT
• Water spray directed at electrical
outlets or switches, or objects con-
nected to an electrical circuit, could
result in a fatal electrical shock.
• Unplug any electrically operated
product before attempting to clean
it. Direct spray away from electric
outlets and switches.
• This product is powered by electric-
ity. It contains and sprays water and
other conductive liquids. Improper
operation could result in electrocu-
tion.
• Always connect cordset to a prop-
erly grounded and polarized electri-
cal circuit. Your cordset is equipped
with a Ground Fault Circuit
Interrupter (GFCI) for your per-
sonal protection.
• The Ground Fault Circuit Interrupter
(GFCI) will not function properly
unless connected to a fully ground-
ed electrical circuit!
• If damaged, the entire cordset
assembly must be replaced by an
authorized service center. Refer to
Grounding Instructions.
• Extension cords can lead to electri-
cal shock. • Do not use with extension cords.

6- ENG
A17914
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of electric
shock. This product is equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
Improper connection of the equipment-grounding
conductor can result in risk of electrocution. Check with a
qualified electrician or service personnel if you are in doubt as to whether
the outlet is properly grounded. Do not modify the plug provided with
the product-if it will not fit the outlet, have a proper outlet installed by a
qualified electrician. Do not use any type of adapter with this product.
To prevent overloading circuit, do not operate any other
electrical device connected to the same circuit while
operating pressure washer.
EXTENSION CORDS
Use additional length of high pressure hose instead of extension cords to avoid
voltage drop and power loss to the motor, and to prevent overheating. DO NOT
USE EXTENSION CORDS. NOTE: The use of additional length of high pressure
hose will lower the pressure washer's psi below 1600.
GROUND FAULT CIRCUIT INTERRUPTER PROTECTION
This pressure washer is provided with a ground fault circuit interrupter (GFCI)
built into the plug of the power supply cord. This device provides additional
protection from the risk of electric shock. Should replacement of the plug or
cord become necessary, use only identical replacement parts that include GFCI
protection.
RISK OF INJURY FROM LIFTING
WHAT CAN HAPPEN HOW TO PREVENT IT
• Serious injury can result from
attempting to lift too heavy an
object.
• The pressure washer is too heavy
to be lifted by one person. Obtain
assistance from others before lifting.
The powerful spray from your pressure washer is capable
of causing damage to surfaces such as wood, glass,
automobile paint, auto striping and trim, and delicate objects such as
flowers and shrubs. Before spraying, check the item to be cleaned to
assure yourself that it is strong enough to resist damage from the force of
the spray. Avoid the use of the concentrated spray stream except for very
strong surfaces like concrete and steel.
READ AND SAVE THESE INSTRUCTIONS

7- ENG A17914
CARTON CONTENTS
Bagged Parts
Nozzle Cleaning
Kit
Engine Frame and
Wheel Assembly
High
Pressure
Hose
Chemical
Hose
Spray Gun
Quick Connect Wand
Grommet Kit
with Quick
Connect Nozzles
Handle
Operator’s
Manual
Registration
card
SPECIFICATIONS
Model PCE1700
PSI Max* 1700 (11721,1 kPa)
Operating PSI 1530 (10549,0 kPa)
GPM Max* 1,7
Operating GPM 1,53
* Water flow and maximum pressure ratings determined in accordance with PWMA
standard PW101.

8- ENG
A17914
Risk of personal
injury. Avoid
placing hands between handle and
frame when assembling to prevent
pinching.
4. Connect wand to gun. Tighten
securely.
5. Attach high pressure hose to gun.
Tighten securely.
NOTE: The pump on this unit is
maintenance free and requires no oil,
if there is a problem with the pump
contact an Authorized Service Center.
Risk of bursting.
Use a tire pressure
gauge to check the tires pressure
before each use and while inflating
tires; see the tire sidewall for the
correct tire pressure.
NOTE: Air tanks, compressors and similar
equipment used to inflate tires can fill
small tires similar to these very rapidly.
Adjust pressure regulator on air supply
to no more than the rating of the tire
pressure. Add air in small increments
and frequently use the tire gauge to
prevent over inflation.
ASSEMBLY INSTRUCTIONS
1. To Assemble Quick Connect
Grommets:
a. Squeeze grommet and place
into hole, fitting groove to
rim.
b. Push grommet into place.
c. Repeat steps until all
grommets are assembled.
2. To Assemble Quick Connect
Nozzles:
a. Remove four
colored
quick
connect
nozzles from
plastic bag
and insert
them into
correct
grommet. NOTE: Nozzles
are color coded to match
colored nozzles on panel.
3. Place handle assembly onto
frame, depress the snap buttons,
and slide the handle assembly onto
the frame until snap buttons snap
into place.

9- ENG A17914
nozzle for low pressure and chemical/
soap applications. See Operation
section.
Chemical Hose (not shown):
Allows cleaners or cleaning solvents
to be mixed with the pressurized
water stream. See How To Siphon
Chemicals/Cleaning Solvents in
Operation section of this manual.
Ground Fault Circuit Interrupter
Protection (GFCI): This washer is
provided with a ground fault circuit
interrupter (GFCI) built into the plug
of the power supply cord. This device
provides additional protection from
the risk of electric shock. Should
replacement of the plug or cord
become necessary, use only identical
replacement parts that include GFCI
protection.
OPERATING INSTRUCTIONS
BASIC ELEMENTS OF A
PRESSURE WASHER
High Pressure Pump (located inside
the shroud): Increases the pressure
of the water supply.
Motor: Drives the high pressure
pump.
High Pressure Hose: Carries the
pressurized water from the pump to
the gun and wand.
Spray Gun: Connects with wand to
control water flow rate, direction, and
pressure.
Quick Connect Wand: Wand is
equipped with a female quick connect
coupler on the end. This allows the
user to quickly change out high-
pressure nozzles for different spray
patterns and change to the soap
READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with
the location of various controls and adjustments. Save this manual for future
reference.
Motor
High
Pressure
Hose
Spray
Gun
Quick
Connect
Wand
High
Pressure
Pump
Electric
Cord

10- ENG
A17914
PRESSURE WASHER
TERMINOLOGY
PSI: Pounds per Square Inch. The
unit of measure for water pressure.
Also used for air pressure, hydraulic
pressure, etc.
GPM: Gallons Per Minute. The unit
of measure for the flow rate of water
through the pressure washer.
CU: Cleaning Units. GPM multiplied
by PSI.
Bypass Mode: In Bypass Mode, the
pump is recirculating water because
the trigger of the spray gun is not
pulled. If unit is left in bypass mode
for more than two (2) minutes, the
water temperature can rise to a
dangerous level and may damage
internal components of the pump. Any
damage to pump due to these causes
will not be covered under warranty.
DO NOT allow your
unit to operate in
bypass mode for more than two
minutes at any time. Overheating
of pump can cause damage to
pump and will void the pump
warranty.
Thermal Relief Valve: In an effort
to prevent extreme damage, pumps
are equipped with a thermal relief
valve. This valve will open when the
temperature inside the pump rises
too high. This valve will then release
a gush of water in an effort to lower
the temperature inside the pump.
Immediately after this occurs, the
valve will close. The thermal relief
valve is part of the pump and is not
visible to the user.
Chemical Injection: Feeds cleaning
agents into the pump to mix with
the pressurized water and help in
cleaning.
Water Supply: All pressure washers
must have a source of water. The
minimum requirements for a water
supply are 20 PSI and 5 gallons per
minute.
PRESSURE WASHER OPERATING
FEATURES
PRESSURE ADJUSTMENTS
The pressure setting is preset at the
factory to achieve optimum pressure
and cleaning. If you need to lower the
pressure, it can be accomplished by
these methods.
1. Back away from the surface to
be cleaned. The further away you
are, the less the pressure will be
on the surface to be cleaned.
2. Change to a wider spray
pattern nozzle. See How to Use
Wand paragraph in this section
-
-
DO NOT attempt
to increase pump
pressure. A higher pressure setting
than the factory set pressure may
damage pump.