POS-Mate PM-BCU1D-B User manual

USB Barcode Scanner
PM-BCU1D-B
Instruction Manual

PM-BCBT2D-W Instruction Manual v.1.0
3
Contents
Warranty 4
Get To Know Your POS-mate Barcode Scanner 5
LED Indicators 6
Beep Indicators 6
Setting Up Your POS-mate Barcode Scanner 7
Volume Settings 7
Automatic Scanning Mode 8
Continuous Scanning Mode 8
Suffix Settings 9
Inversed Barcode Setting 10
Hide Character Settings 10
Keyboard Language Settings 12
Lock Configuration 13
Restore Factory Settings 13
System Information 13
Technical Information 14
Troubleshooting 15

PM-BCBT2D-W Instruction Manual v.1.0
4
Warranty
POS-mate reserves the right to make changes to any product to improve
reliability, function, or design. POS-mate does not assume any product
liability arising out of, or in connection with, the application or use of any
product, circuit, or application described herein. No license is granted,
either expressly or by implication, estoppel, or otherwise under any
patent right or patent, covering or relating to any combination, system,
apparatus, machine, material, method, or process in which POS-mate
products might be used. An implied license exists only for equipment,
circuits, and subsystems contained in POS-mate products.
For the complete hardware product warranty statement, go to:
http://www.pos-mate.com/warranty
For Australia Only
This warranty is given by PICA Australia Pty. Ltd (ABN 70 113 812 721) of 8
Translink Drive, Keilor Park, Vic. 3042 Australia, as the owner of the brand
referred to as POS-mate. POS-mate products are subject to rigorous
testing and assessment as to their quality and suitability for purpose. Our
goods come with guarantees that cannot be excluded under Australian
Consumer Law. You are entitled to a replacement or refund for a major
failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if
the goods fail to be of acceptable quality and the failure does not amount
to a major failure. POS-mate’s Australian limited warranty above is in
addition to any rights and remedies you may have under Australian
Consumer Law. If you have any queries, please call POS-mate on
[phone].

PM-BCBT2D-W Instruction Manual v.1.0
5
Get To Know Your POS-mate Barcode Scanner

PM-BCBT2D-W Instruction Manual v.1.0
6
LED Indicators
LED Sequence
Description
Blue - Flash
Reading Barcode
Beep Indicators
Beep Sequence
Description
2 short beeps
Connected
1 short beep
Barcode read successfully
1 long beep
Data upload unsuccessful

PM-BCBT2D-W Instruction Manual v.1.0
7
Setting Up Your POS-mate Barcode Scanner
Remove your POS-mate USB Barcode Scanner from its
packaging and place it on your countertop.
Insert one end of the cable supplied into the POS-mate USB
Barcode Scanner, the other end into a USB port on you PC
or Mac.
Your POS-mate USB Barcode Scanner is ready to use.
Volume Settings
Your POS-mate USB Barcode Scanner will beep each time the
scanner button is pressed. Adjust the volume of the scanning
beep on your POS-mate USB Barcode Scanner to mute, low
volume or high volume by scanning the desired barcode below.
Mute
Unmute
Low Volume
High Volume (default)

PM-BCBT2D-W Instruction Manual v.1.0
8
Automatic Scanning Mode
Your POS-mate USB Barcode Scanner can be programmed to
automatically scan when movement is detected without the need
for the scanner button to be pressed. Scan the Turn On Auto
Mode barcode to enable this feature, you can disable this feature
at any time by scanning the Turn Off Auto Mode barcode.
Manual Scan Mode (default)
Turn Off Auto Mode (default)
Turn On Auto Mode
Continuous Scanning Mode
Your POS-mate USB Barcode Scanner can be programmed to
continuously scan without the need for the scanner button to be
pressed. Scan the Continuous Scan Mode barcode to enable this
feature, you can disable this feature at any time by scanning the
Manual Scan Mode barcode.
Continuous Scan Mode

PM-BCBT2D-W Instruction Manual v.1.0
9
Suffix Settings
Your POS-mate USB Barcode Scanner will simulate pushing the
Return or Enter key on your keyboard at the end of each scan,
also known as Carriage Return (CR). Your scanner can be
programmed to simulate a Tab on your keyboard or simulate
nothing after each scan. Scan the required barcode for the
desired setting.
Add Return / Enter (CR) (default)
Add Tab
Remove Suffix

PM-BCBT2D-W Instruction Manual v.1.0
10
Inversed Barcode Setting
Your POS-mate USB Barcode Scanner can read barcodes that
have a black background and white bars from factory, these
barcodes are known as inversed barcodes. If you would like to
remove this feature please scan the Disable Inversed Barcodes,
scan the Enable Inversed Barcodes to enable it.
Disable Inversed Barcodes
Enable Inversed Barcodes
Hide Character Settings
Your POS-mate USB Barcode Scanner can hide 1, 2, or 3
characters at the start or the end of a barcode. Simply scan the
barcode required below to set you POS-mate USB Scanner.
Hide First Barcode Character
Hide First 2 Barcode Characters

PM-BCBT2D-W Instruction Manual v.1.0
11
Hide First 3 Barcode Characters
Cancel Hide First Barcode Characters
Hide Last Barcode Character
Hide Last 2 Barcode Characters
Hide Last 3 Barcode Characters
Cancel Hide Last Barcode Characters

PM-BCBT2D-W Instruction Manual v.1.0
12
Keyboard Language Settings
The POS-mate USB Barcode Scanner default keyboard language is
American English. You can adjust your keyboard language setting
by scanning the desired language barcode.
American English
British English
French
Spanish
Other languages can be found at
www.pos-mate.com/support
or
use your scanner to scan the
QR
code into your browser.

PM-BCBT2D-W Instruction Manual v.1.0
13
Lock Configuration
You can lock your POS-mate USB Barcode Scanner from accepting
any configuration barcodes by scanning the Disable Configuration
barcode. You will need to scan the Enable Configuration barcode
to unlock your POS-mate USB Scanner make further configuration
changes.
Disable Configuration
Enable Configuration (default)
Restore Factory Settings
Your POS-mate USB Barcode Scanner can be restored to its
factory setting by scanning the barcode.
Restore Factory Settings
System Information
Firmware Version

PM-BCBT2D-W Instruction Manual v.1.0
14
Technical Information
Product name
POS-mate USB Barcode Scanner
Product code
PM-BCU1D-B
UPC
746935310318
Scanner type
CCD
Light source
Red LED
CPU
32bit
Resolution
2500
Reading precision
3mil
Decoding speed
300t scans/s
Depth of field
3cm – 60cm
Scan mode
Manual (default)
Autosensing
Scan Angle
Roll: 30°
Pitch: 60°
Skew: 60°
Print contrast
20%
Power requirements
DC 3.3-5V@50mA(work）
Operating temperature
-20°C to 55C
Storage temperature
-20°C to 60C
Humidity
5% to 95% (non-condensing)
Certificates
FCC, RoHS, CE, RCM

PM-BCBT2D-W Instruction Manual v.1.0
15
Troubleshooting
Scanner not working
Scanner not connected
Check USB cable is connected
at both ends.
Scanner does not decode barcode
Barcode is unreadable
Ensure barcode is complete, try
another barcode
Some barcodes disabled
Review Barcode Type Settings
Distance between scanner
and barcode is incorrect
Move barcode scanner to
between 3cm and 50cm from
barcode.

© POS-mate 2022
www.pos-mate.com