POScenter OT 2D User manual

Инструкция к сканеру штрих-кода
Poscenter OT 2D
Contents
1: Start..................................................................................................................................1
About user manual..............................................................................................................................1
Reset default.........................................................................................................................................1
Interface mode initialization...............................................................................................................1
2: Function mode setting..................................................................................................2
About Function mode setting ............................................................................................................2
Operating mode ...................................................................................................................................2
Barcode on/off......................................................................................................................................4
Image reversal......................................................................................................................................5
Lighting settings...................................................................................................................................5
Speaker settings..................................................................................................................................6
Beeper duration....................................................................................................................................6
Dormancy settings...............................................................................................................................7
Three-level lighting setting.................................................................................................................7
Code reading timeout setting............................................................................................................8
Interface settings..................................................................................................................................9
RS232 interface ...................................................................................................................................9
Data bit................................................................................................................................................ 10
Stop bit................................................................................................................................................ 10
Check bit setting................................................................................................................................ 10
3:Output settings..............................................................................................................11
About output settings....................................................................................................................... 11
Carriage return/line feed setting.................................................................................................... 11
Remove the barcode line at the beginning/end......................................................................... 11
Set barcode length........................................................................................................................... 12
Additional code settings.................................................................................................................. 12
Chinese output in keyboard mode................................................................................................ 13

Keyboard language country type .................................................................................................. 13
Analog keyboard............................................................................................................................... 15
Caps lock............................................................................................................................................ 15
Data Format....................................................................................................................................... 15
4: Barcode symbology configuration...........................................................................16
About Barcode symbology configuration..................................................................................... 16
Barcode configuration...................................................................................................................... 16
1. Airline 2 of 5......................................................................................................................... 16
2. Aztec Code........................................................................................................................... 16
3. Codaba.................................................................................................................................. 16
4. Codablock A......................................................................................................................... 16
5. Codablock F......................................................................................................................... 17
6. Code 128.............................................................................................................................. 17
7. Code 11................................................................................................................................. 17
8. Code 32................................................................................................................................. 19
9. Code 39................................................................................................................................. 19
10. Code93.................................................................................................................................. 19
11. Composite............................................................................................................................ 19
12. Data Matrix Code................................................................................................................ 20
13. EAN/UPC.............................................................................................................................. 20
14. EAN-8.................................................................................................................................... 20
15. EAN-13.................................................................................................................................. 21
16. Full ASCII Code39.............................................................................................................. 21
17. GS1 DataBar Expanded.................................................................................................... 22
18. GS1 DataBar Limited......................................................................................................... 22
19. GS1 DataBar Omnidirectional ......................................................................................... 22
20.HANXIN................................................................................................................................. 23
21. Hong Kong 2 of 5(China post)......................................................................................... 23
22. Interleaved 2 of 5................................................................................................................ 23
23. Matrix 2 of 5......................................................................................................................... 24
24. Maxicode .............................................................................................................................. 24
25. MicroPDF417....................................................................................................................... 24
26. Micro QR Code.................................................................................................................... 24

27. MSI......................................................................................................................................... 25
28. PDF417................................................................................................................................. 25
29. Pharmacode......................................................................................................................... 25
30. QR Code............................................................................................................................... 25
31. Straight 2 of 5 Industrial.................................................................................................... 26
32. Telepen................................................................................................................................. 26
33. Trioptic Code........................................................................................................................ 26
34. UPC-A................................................................................................................................... 26
35. UPC-E................................................................................................................................... 27
5: Special function configuration (example)...............................................................28
About Special function configuration............................................................................................ 28
Only set the prefix and suffix of cross 25 code.......................................................................... 28
Scan the billing data code............................................................................................................... 29
Configure to output only the first 24 characters......................................................................... 29
Web page Chinese input settings................................................................................................. 30
Attached: ASCII code table............................................................................................................ 31
Attachment: ASCII code extended characters (CP-1252 code).................................................. 31
Bytecode value (decimal)................................................................................................................ 32

1
1: Start
About user manual
This user manual includes code system settings, function settings (lighting, keyboard type, and factory
reset, etc.) and interface settings. If you need to change the function you need, scan the configuration
according to the configuration code below. All bands (*) indicate the factory default value.
Reset default
Recall Default
Read the Version Number
Interface mode initialization
Identify it as a USB keyboard type, scan the "USB keyboard" barcode.
In the environment where the application software requires the serial port, USB can be
recognized as the USB COM type, and the USB COM type needs to be installed by the user
USB Keyboard
USB COM

2
2: Function mode setting
About Function mode setting
In this chapter, you can configure the function mode of the device, including working
mode (such as image reversal, etc.), Aimer setting, lighting configuration, LED indicator
setting and speaker setting, etc. You only need to scan the corresponding configuration
codes as required.
Operating mode
* Manual trigger mode
Auto scan mode
here are 15 levels of sensitivity in auto scan mode, 1 is the highest, 15 is the lowest

3
Auto scan mode same barcode interval time setting
50ms
100ms
150ms
200ms

4
250ms
300ms
Barcode on/off
Turn on all barcodes
Turn off all barcodes
Turn on all one-dimensional codes
Turn off all one-dimensional codes
Turn on all two-dimensional codes
Turn off all two-dimensional codes

5
Image reversal
Image reversal
Lighting
settings
*Normal
image
Enable *Aimer
Disable Aimer
Enable *Light
Disable Light
*Led indicator is normal
Led indicator reverse

6
The LED indicator
is always off
The LED indicator is always on
Speaker settings
*Turn on Speaker
Turn off Speaker
Beeper duration
Normal
Short
2.7KHz
1.6KHz

7
2.0KHz
2.4KHz
3.1KHz
3.5KHz
4.2KHz
No sound
Dormancy settings
10s Dormancy
100s Dormancy

8
Three-level lighting setting
One-level
Two-level
Three-level
Code reading timeout setting
30s
60s
120s
180s
240s
240s

9
Interface settings
RS232 interface
RS232 baud rate
300
600
2400
4800
*9600
19200
38400
57600

10
115200
Data bit
7 bits
8 bits
Stop bit
2 bits
1 bit
Check bit setting
O
S
E
M

11
N
3: Output settings
About output settings
This chapter can configure the output of the device, including carriage return/line feed,
adding pre/suffix, setting bar code length, removing bar code digits (start/end removal) and
multi-country keyboard switching settings, etc. You only need to scan the corresponding
configuration code as required. That's it.
Carriage return/line feed setting
Add carriage return
Cancel carriage return
Add line feed
Cancel line feed
Remove the barcode line at the beginning/end
Remove the barcode line at the beginning
Remove the barcode line at the end
Remove one bit

12
Set barcode length
The length 1
The length is 255
Barcode length lock
Additional code settings
Enable two additional codes
*Disable two additional codes
Enable two additional codes
*Disable two additional codes
All UPC/EAN codes must have additional codes
*No additional code required

13
Chinese output in keyboard mode
The keyboard mode can output as Chinese. If you need to output as Chinese, please scan the
corresponding configuration code as required. (The default state is no Chinese, but other national
languages can be input)
*Default
Can be used for word, qq, not for excel, notepad
Can be used in notepad, excel, not in word
Keyboard language country type
Belgium
UK
France
Germany
Italy

14
Spanish
USA
Singapore
Salvador
Japan
Sierra Leone
Turkey
Russia
Hungary
Russian (Russia)
Thai

15
Analog keyboard
You may need to type your characters in the form of ASCII code. At this time, you can configure
the corresponding configuration code to simulate the keyboard as required
Enable analog keyboard
Disable analog keyboard
Turn on the analog keyboard and the front is zero
Turn off the analog keyboard and
the front is zero
Caps lock
All lowercase
All capital
Data
Format
Reset
The programming mode is the user can edit the output pre/suffix and lock the length of the bar code.
The user needs to scan the configuration first and enter the programming mode, and then scan the
code according to the configuration bar code flow in turn. Two configuration programming modes will
be attached later. The example is for user's reference. For details, please check barcode length lock,
add pre/suffix. (Barcode length lock supports up to 6 barcode types, length lock configurations, and the
prefix and suffix respectively support up to)

16
4: Barcode symbology configuration
About Barcode symbology configuration
This chapter can configure the bar code system of the device, including UPC/EAN,
Codebar code, Code39, Full ASCII Code39, Interleaved 2 of 5, Code93, UPC-A, GS1
DataBar Omnidirectional, GS1 DataBar Expanded, PDF417, QR Code, Hong Kong 2 of 5
(China post) and Airline 2 of 5 support barcode configuration, you only need to scan the
corresponding configuration codes in sequence according to the requirements. (The
default is*)
Barcode configuration
1. Airline 2 of 5
Enable
*Disable
2. Aztec Code
Enable
*Disable
3. Codaba
*Enable
Disable
4. Codablock A
Enable

17
*Disable
5. Codablock F
Enable
*Disable
6. Code 128
*Enable
Disable
7. Code 11
Enable
*Disable