Positive posture Brio User manual

!
!
!
!
Brio Massage Chair:
Unpacking and Assembly
1. Refer to accessory and hardware list
located on page 15 of the owner’s
manual for proper part names.
2. Unbox chair and place in desired
location. Plug the power cord into a
power supply. Turn the main power
switch on.
!
3. Securely attach the remote control
cord into the back of the chair.
4. The remote control cable can be
attached to either side of the chair.

Brio Massage Chair:
Unpacking and Assembly
5. Place the backrest pad and seat onto
the body of the chair and securely
connect the heater connector.
6. Slowly zip the zipper around the
bottom of the seat pad.
7. Zip 3 zippers to connect the back pad to the body of
the chair. They are located on both sides of the pad as
well as the top of the pad.

Brio Massage Chair:
Unpacking and Assembly
8. To attach armrests: Remove 2 armrest
bolts from the chair using the 4mm T-wrench
included with the chair.
9. Connect the electrical connector and
airline on the armrest to the body of the
chair.
10. Install arms by firmly pushing the
armrest pin into the body retainer clip.
11. Align the armrest brackets with the
body mounting holes.

Brio Massage Chair:
Unpacking and Assembly
12.!Install!bolt!located!in!front!first.!
13.!Install!bolt!located!behind!electrical!
connection!and!airline.!!
Note:!DO!NOT!DROP!BOLTS.!You!will!not!be!able!
to!retrieve!bolts!once!they!have!fallen!in.!
14. Velcro remote control cord to armrest.
15. Place the footrest near the front of
the chair for easy installation.

Brio Massage Chair:
Unpacking and Assembly
16. Connect the electrical connector and three
airlines to base of chair (color-coded).
17. Lift jaw and place footrest into openings.
NOTE: If jaws do not fully close, wiggle
footrest until jaws are fully shut.
18. Insert 5mm bolts into both sides of footrest
to secure footrest connection.
19. Zip seat pad zipper to footrest fabric
zipper.

Brio Massage Chair:
Unpacking and Assembly
20. Remove velcro from footrest fabric and
attach velcro to seat pad.
21. Zip pillow to back pad fabric
zipper.
23. Insert pillow through backrest pad and
seat fabric loop.

!