pottery barn kids RORY BED User manual

Date: 2016-Feb.-25
Rev: Page 1 of 4
pottery barn kids
RORY BED
TWIN / FULL
www.potterybarnk i ds .com

Date: 2016 -Feb.-25
Rev: Page 2 of 4
IMPORTANT SAFETY INSTRUCTIONS:
•Please read all instructions carefully before assembling.
•For your safety, assembly by two or more adults is strongly recommended.
•Keep instructions for future use.
•Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
integrity of the item.
PRE-ASSEMBLY:
•Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface, as
this will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
•Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid
accidentally discarding small parts or hardware.
•Use the parts and hardware lists below to identify and separate each of the pieces included.
•The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
•The use of power tools to aid in assembly is not recommended. Power tools can damage hardware and split
wood.
Parts Included:
(A) Headboard (x1)
(B) Footboard (x1)
(C) Side Rail (x2)
(D) Slat Roll (x1)
TOOLS REQUIRED:
Phillips head screwdriver (not included)
HARDWARE INCLUDED:
( E) Phillips Head screw 8x30mm – 28x

Date: 2016 -Feb.-25
Rev: Page 3 of 4
ASSEMBLY INSTRUCTION STEPS:
1. Attach Side Rails (C) to the Headboard (A) by hooking the end of the Side Rails into the slots and applying
downward force until they are fully in place.
NOTE: side rails have (2) settings:
Use the higher setting if not using a box spring mattress and/or if a trundle will be used with the bed.
Use the lower setting if using a mattress & box spring. We recommend a box spring if you want to use
a bed skirt/box spring cover or add height to the bed.
Our beds do not require a box spring at either setting since they include a slat roll foundation system,
but one may be used.
2. And attach the other end of the Side Rails (C) to the Footboard (B) using the same procedure as Step #1
3. Lay the slat roll (D) in between the Headboard (A) and the Footboard (B). Secure the slats by fastening (28x)
Phillips head screw (E) through the hole at the end of the slat and into the side rail. Loosely tighten with a
Phillips Head Screwdriver (Not included).
4. Tighten all bolts and screws to make sure all are tight and bed structure is rigid. It is recommended all
screws be checked from time to time for safety as the hardware may loosen over time.
E 28x

Date: 2016 -Feb.-25
Rev: Page 4 of 4
5. Assembly is complete.
Rory Trundle (sold separately)
Note: Make sure the Side Rails of the Rory Bed are at the high position before pushing the trundle
underneath.
Care Instructions:
•Dust often using a clean, soft, dry and lint-free cloth.
•Blot spills immediately and wipe with a clean, damp, cloth.
•We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
•Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary.
Thank you for your purchase
Stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181
HIGH POSITION