POVISON TS1050WS User manual

Drill with electric drill.
Wall
A
Installation instruction
B
4
Self-tapping screws
1.Place the cabinet at a suitable height and mark the holes with a marker.
3.Put the support bracket at the corresponding position at the bottom of
the TV cabinet, and mark the hole position with a marker.
2.Connect and hang cabinets.(Please note that this step requires one person
on each side to support the cabinet until the brackets are installed.)
Self-tapping screws
4.Complete the installation
Drill with electric drill.
A expansion screws
(1)
(2)Use a hammer to drive the expansion screw
into the rubber stopper.
Insert the expansion screw
plug into the hole.
Wall
(1) Place the nut on the expansion
screw stud and screw it.
(1)
Push the expansion
screw into the wall
with a hammer.
(2)
Place the nut on the
expansion screw stud and
screw it.
(3)
Tighten the self-tapping
screw with a screwdriver.
2
B expansion screws
Serial
number Shape Name Quantity
TS1050WS/BS Installation
Suggested Number of People for Assembly：3
①Please read the manual carefully
before installing this product.
And strictly follow the
installation process
② Please take good care of this
manual for your next installation
TotaL 1 page; page 1
Parts list
C
2
Support Frame
of TV cabine
D
A expansion screws
(8*70mm)
B expansion screws
(6*60mm)
4

A
C8
B
4
Serial
number Shape Name Quantity
Self-tapping screws
TS1050BL/WL Installation
Suggested Number of People for Assembly：3
①Please read the manual carefully
before installing this product.
And strictly follow the
installation process
② Please take good care of this
manual for your next installation
Drill with electric drill.
Wall
4.Complete the installation
(1) Place the nut on the expansion
screw stud and screw it.
2.Connect and hang cabinets.(Please note that this step requires one person
on each side to support the cabinet until the brackets are installed.)
Drill with electric drill.
(2)Use a hammer to drive the expansion screw
into the rubber stopper.
Wall
1.Place the cabinet at a suitable height and mark the holes with a marker.
3.Put the support bracket at the corresponding position at the bottom of
the TV cabinet, and mark the hole position with a marker.
Parts list
TotaL 1 page; page 1
Installation instruction
4
Support Frame
of TV cabine
A expansion screws
D
8
Self-tapping screws
(1)
Push the expansion
screw into the wall
with a hammer.
(2)
Place the nut on the
expansion screw stud and
screw it.
(3)
Tighten the self-tapping
screw with a screwdriver.
B expansion screws
(1) Insert the expansion screw
plug into the hole.
A expansion screws
(8*70mm)
B expansion screws
(6*60mm)