Power Floss Dental Jet Operating instructions

User's Guide and Troubleshooting Manual
CHECK YOUR POWER FLOSS BEFORE USE
•Remove the yellow warning sticker at the bottom side of the Power Floss Water Jet.
•Make sure to turn it upright. Hold at both ends and carefully twist the reservoir counter-
clockwise.
•Separate the reservoir from the pump housing.
•Submerge the pump housing in water and prime it by pressing the green button
repeatedly for 60 sixty seconds.
•Lift the nozzle just above the water and press the button repeatedly until a steady jet of
water squirts out.
INSTRUCTIONS
•Twist the Power Floss Water Jet reservoir and separate from the pump housing.
•Test the pump housing first by fully submerging it in water.
•Press the green button. If a stream of water squirts out of the nozzle, that means nothing
is blocking the nozzle from the inside.

•Fill the reservoir with water and twist back the pump housing and the reservoir back
together.
•Hold the nozzle against your gum line and squeeze the green button to release a jet of
water or mouthwash. Make sure to use it on the front and back gumline to remove food
particles and stains.
FAQ
Question: Is it appropriate for kids?
Answer: Yes. The Power Floss Water Jet is easy to use that even children can enjoy its benefits.
It’s not electrically powered so there’s also no danger of getting electrocuted. Younger children
still need adult supervision.
Question: How much water can it hold?
Answer: The water reservoir can contain enough water for one
Question: Can I fill the reservoir with mouthwash instead of water?
Answer: Yes, you can. Thin mouthwash will work best with this product.
Question: What power does it run on?
Answer: The Power Floss Water Jet oral irrigation system does not run on electricity nor
batteries. It uses an air pump action to push the water out of the nozzle by pressing the button
a few times. This product is environment-friendly.
Question: I’m wearing braces. Will this work for me?
Answer: Yes! This product also works best for people with braces as the nozzle is thin enough
to get under the wire. Looping dental floss under your braces to get between your teeth is
messy and there’s a chance that the floss will get entangled with your braces. It will also provide
additional cleaning to your braces that bristles from a toothbrush can’t reach.

Question: As someone with rheumatoid arthritis, will it make flossing easier for me?
Answer: Yes, it will! All you need to do is push the green button to let the water out straight to
your teeth. It won’t be as painful to your hands as having to use a regular floss.
Question: How much water can it contain?
Answer: The reservoir can contain enough water for one routine use of the Power Floss Water
Jet. Outside the water reservoir is a line labeled MAX that you can use as a guide on how much
you’ll need to fill it.
Question: What should I do when water won’t come out of the nozzle?
Answer: It is possible that there is some kind of blockage at the nozzle or at the pump housing.
Try using a thin wire to insert at the nozzle to see if there is anything blocking the flow of water.
Do the same with the pump tube.
Question: Why is the water not coming out fast as it should?
Answer: Please press the button fast and hard for the water to jet stream out of the nozzle.