PowerBlock POWERMAX STAND User manual

2
13
ALIGNMENT
PEG HOLE
4
5
6
POWERBLOCK POWERMAX STAND ASSEMBLY
STEP ONE
TOOLS NEEDED: ONE 17 mm WRENCH AND ONE 6 mm HEX ALLEN WRENCH.
1. ATTACH LEFT LEG (ITEM 2) TO SPACER SUPPORT (ITEM 1) WITH SUPPLIED HARDWARE.
ALIGN PEG ON SPACER SUPPORT WITH PEG HOLE ON LEG. DO NOT TIGHTEN HARDWARE.
2. ATTACH RIGHT LEG (ITEM 3) TO SPACER SUPPORT (ITEM 1) WITH SUPPLIED HARDWARE.
TIGHTEN ALL HARDWARE.
ITEM NO. DESCRIPTION QTY.
1 POWERMAX STAND SPACER SUPPORT 1
2 POWERMAX STAND LEFT LEG 1
3 POWERMAX STAND RIGHT LEG 1
4 M10 - 1.5 mm X 50 mm BUTTON HEAD SCREW 4
5 M10 WASHER 8
6 M10 - 1.5 mm LOCK NUT 4

4
2
5
1
3
POWERBLOCK POWERMAX STAND ASSEMBLY
STEP TWO
TOOLS NEEDED: ONE 8 mm WRENCH.
1. ATTACH BOTH TOPS (ITEM 2) TO LEG ASSEMLBY (ITEM 1) WITH SUPPLIED HARDWARE.
TIGHTEN HARDWARE.
2. APPLY TRAY MATS (ITEM 4) TO TOPS (ITEM 2).
3. APPLY POWERBLOCK DECAL (ITEM 5) TO SPACER SUPPORT OF LEG ASSEMBLY.
TIGHTEN ALL HARDWARE.
FOR USE ON FIRM AND FLAT SURFACE ONLY.
ITEM NO. DESCRIPTION QTY.
1 POWERMAX STAND LEG ASSEMBLY 1
2 POWERMAX STAND TOP 2
3 M5 - 0.8 mm LOCK NUT 8
4 POWERMAX TRAY MAT 2
5 POWERBLOCK DECAL 1